Preceramic paper-derived SiCf/Ti3Al(Si)C2 and SiCf/Ti3SiC2 MAX-phase based laminates fabricated using spark plasma sintering; Scripta Materialia; Vol. 194
| Parent link: | Scripta Materialia Vol. 194.— 2021.— [113696, 5 p.] |
|---|---|
| निगमित लेखकों: | , |
| अन्य लेखक: | , , , , , |
| सारांश: | Title screen For the first time SiCf/Ti3Al(Si)C2 and SiCf/Ti3SiC2 MAX-phase based laminates were fabricated from preceramic papers by spark plasma sintering (SPS). The fibers were coated with a 4-µm layer of carbon by chemical vapor deposition. The phase composition and microstructure were analyzed by X-ray diffraction and scanning electron microscopy, respectively. The flexural strength of Ti3Al(Si)C2-based laminates with carbon coated SiC fibers was ~990 MPa, which is 20% higher compared to laminates with uncoated fibers. The carbon coating prevents chemical reaction between the fiber layers and MAX-phase based laminates, providing toughening mechanisms associated with fiber detachment and pull-out. No significant reaction of the fibers occurs during the sintering of SiCf/Ti3SiC2 based laminates, which has a flexural strength of ~850 MPa. The layer-by-layer reinforced structure of laminates along with the presence of strengthening phases (TiC and Al2O3) provides toughening mechanisms due to deflection and branching of cracks at macro and micro scales. Режим доступа: по договору с организацией-держателем ресурса |
| भाषा: | अंग्रेज़ी |
| प्रकाशित: |
2021
|
| विषय: | |
| ऑनलाइन पहुंच: | https://doi.org/10.1016/j.scriptamat.2020.113696 |
| स्वरूप: | इलेक्ट्रोनिक पुस्तक अध्याय |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=663891 |
समान संसाधन
Irradiation resistance of preceramic paper-derived SiCf/SiC laminated composites; Journal of Materials Science; Vol. 57
प्रकाशित: (2022)
प्रकाशित: (2022)
Microstructural Analysis of Novel Preceramic Paper-Derived SiCf/SiC Composites; Materials; Vol. 14, iss. 22
प्रकाशित: (2021)
प्रकाशित: (2021)
Preceramic Paper-Derived SiCf/SiCp Composites Obtained by Spark Plasma Sintering: Processing, Microstructure and Mechanical Properties; Materials; Vol. 13 iss. 3
प्रकाशित: (2020)
प्रकाशित: (2020)
Разработка радиационно-стойких композитов SiCf/SiC на основе прекерамической бумаги: диссертация на соискание ученой степени кандидата технических наук; спец. 1.3.8
द्वारा: Ли Кэ
प्रकाशित: (Томск, 2023)
द्वारा: Ли Кэ
प्रकाशित: (Томск, 2023)
Spark plasma sintering of Nb/Ti3Al(Si)C2-TiC laminated composites; Materialia; Vol. 27
प्रकाशित: (2023)
प्रकाशित: (2023)
Разработка радиационно-стойких композитов SiCf/SiC на основе прекерамической бумаги: автореферат диссертации на соискание ученой степени кандидата технических наук; спец. 1.3.8
द्वारा: Ли Кэ
प्रकाशित: (Томск, 2023)
द्वारा: Ли Кэ
प्रकाशित: (Томск, 2023)
SiC- and Ti₃SiC₂-Based Ceramics Synthesis by Spark Plasma Sintering of Preceramic Paper; Journal of Physics: Conference Series; Vol. 1443 : Issues of Physics and Technology in Science, Power Industry and Medicine
प्रकाशित: (2020)
प्रकाशित: (2020)
Карбид кремния: рост, свойства, применение бета-SiC и альфа-SiC (6H)
प्रकाशित: (Ташкент, ФАН, 1977)
प्रकाशित: (Ташкент, ФАН, 1977)
SiC- and Ag-SiC-Doped Hydroxyapatite Coatings Grown Using Magnetron Sputtering on Ti Alloy for Biomedical Application; Coatings; Vol. 12, iss. 2
प्रकाशित: (2022)
प्रकाशित: (2022)
Светоизлучающие свойства перспективных нанокристаллических Si/SiC структур: учебно-методический комплекс
द्वारा: Костишко Б. М.
प्रकाशित: (Ульяновск, УлГУ, 2006)
द्वारा: Костишко Б. М.
प्रकाशित: (Ульяновск, УлГУ, 2006)
Obtaining a Material Based on Я-SiC and Carbon Fibers Using an Electric Arc Technique; Inorganic Materials: Applied Research; Vol. 10, iss. 4
प्रकाशित: (2019)
प्रकाशित: (2019)
Laminated Ti3SiC2/Zr based composites obtained by spark plasma sintering; Journal of Physics: Conference Series; Vol. 1989 : Prospects of Fundamental Sciences Development (PFSD 2021)
प्रकाशित: (2021)
प्रकाशित: (2021)
High temperature oxidation and thermal properties of laminated Ti3Al(Si)C2-TiC/Nb based composites obtained by spark plasma sintering; Journal of Alloys and Compounds; Vol. 982
प्रकाशित: (2024)
प्रकाशित: (2024)
Preceramic paper-derived Ti3Al(Si)C2-based composites obtained by spark plasma sintering; Ceramics International; Vol. 47, iss. 9
प्रकाशित: (2021)
प्रकाशित: (2021)
Формирование керамических композитов SiCв/SiC искровым плазменным спеканием прекерамических бумаг; Наука. Промышленность. Оборона, НПО-2020; Т. 3
प्रकाशित: (2020)
प्रकाशित: (2020)
Porous SiC ceramic obtained by spark plasma sintering of preceramic paper: Microstructure, mechanical properties and gas permeability; Ceramics International; Vol. 50, iss. 8
प्रकाशित: (2024)
प्रकाशित: (2024)
Synthesis of Ti[3]SiC[2]-based composites by spark plasma sintering of preceramic papers; IOP Conference Series: Materials Science and Engineering; Vol. 597 : Prospects of Fundamental Sciences Development (PFSD-2019)
प्रकाशित: (2019)
प्रकाशित: (2019)
Fabrication of Paper-Derived Ti3SiC2-Based Materials by Spark Plasma Sintering; Advanced Engineering Materials; Vol. 22, iss. 6
प्रकाशित: (2020)
प्रकाशित: (2020)
Ti3SiC2 MAX-Phase-Based Composites Produced by Vacuum and Spark Plasma Sintering; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 19, iss. 5
प्रकाशित: (2025)
प्रकाशित: (2025)
Физико-химические основы формирования керамики на основе SiC монография
द्वारा: Шабанов Ш. Ш.
प्रकाशित: (Махачкала, ДГУ, 2016)
द्वारा: Шабанов Ш. Ш.
प्रकाशित: (Махачкала, ДГУ, 2016)
High Toughness Laminated Composites Fabricated from Ti3Al(Si)C2 Filled Preceramic Paper and Nb Foils: Formation Mechanism and Influence of Laminate Architecture; Advanced Engineering Materials; Vol. 26, iss. 13
प्रकाशित: (2024)
प्रकाशित: (2024)
Microstructure and Phase Composition of Porous SiC-Ceramic Obtained by Spark Plasma Sintering of Preceramic Paper; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 17
द्वारा: Sedanova E. P. Elizaveta Pavlovna
प्रकाशित: (2023)
द्वारा: Sedanova E. P. Elizaveta Pavlovna
प्रकाशित: (2023)
Поверхностные свойства керамики SiC, текстурированной лазерным излучением; Бутаковские чтения
प्रकाशित: (2023)
प्रकाशित: (2023)
Influence of preceramic paper composition on microstructure and mechanical properties of spark plasma sintered Ti3SiC2-based composites; Journal of Physics: Conference Series; Vol. 1611 : Prospects of Fundamental Sciences Development (PFSD-2020)
प्रकाशित: (2020)
प्रकाशित: (2020)
Влияние армирования волокнами SiC ламинатов на основе Ti3Al(SI)C2, полученные искровым плазменным спеканием прекерамических бумаг; Перспективы развития фундаментальных наук; Т. 1 : Физика
द्वारा: Жданов А. Е. Андрей Евгеньевич
प्रकाशित: (2021)
द्वारा: Жданов А. Е. Андрей Евгеньевич
प्रकाशित: (2021)
Исследование реологических свойств металло-керамических и керамических композитов на основе MAX-фазы Ti3SiC2; Прогрессивные технологии и экономика в машиностроении
द्वारा: Копытов Г. С.
प्रकाशित: (2025)
द्वारा: Копытов Г. С.
प्रकाशित: (2025)
Microstructure and mechanical properties of laminated Nb/Ti3Al(Si)C2-TiC-Al2O3 composites; Journal of Materials Science; Vol. 60, iss. 45
प्रकाशित: (2025)
प्रकाशित: (2025)
Исследование структуры слоистого металлокерамического композита Ti/(ZrB2-SiC); Перспективные материалы конструкционного и функционального назначения
प्रकाशित: (2020)
प्रकाशित: (2020)
Ultrasonic tomography of SiC-based materials synthesized by spark plasma sintering of preceramic paper; Journal of Physics: Conference Series; Vol. 1327 : Innovations in Non-Destructive Testing (SibTest 2019)
प्रकाशित: (2019)
प्रकाशित: (2019)
Synthesis of MAX-Phase Ti3SiC2 by Combined Powder Metallurgy Technique; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 6
प्रकाशित: (2024)
प्रकाशित: (2024)
Исследование реологических свойств металло-керамических и керамических композитов на основе MAX-фазы Ti3SiC2; Перспективы развития фундаментальных наук; Т. 1 : Физика
द्वारा: Копытов Г. С.
प्रकाशित: (2025)
द्वारा: Копытов Г. С.
प्रकाशित: (2025)
Formation of gradient porous composites from preceramic papers with Ti3SiC2 powder filler; Journal of Physics: Conference Series; Vol. 1989 : Prospects of Fundamental Sciences Development (PFSD 2021)
प्रकाशित: (2021)
प्रकाशित: (2021)
Анализ качества покрытий систем Ti-Si, Ti-Al-Si и одноэлементного многослойного покрытия TiN; Современные техника и технологии; Т. 2
द्वारा: Ермошкин А. А.
प्रकाशित: (2012)
द्वारा: Ермошкин А. А.
प्रकाशित: (2012)
Microstructure and Deformation Behavior of Novel Metal–Ceramic Laminated Composites Ta/Ti3Al(Si)C2–TiC; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18
प्रकाशित: (2024)
प्रकाशित: (2024)
Estimating Low- and High-Cyclic Fatigue of Polyimide-CF-PTFE Composite through Variation of Mechanical Hysteresis Loops; Materials; Vol. 15, iss. 13
प्रकाशित: (2022)
प्रकाशित: (2022)
Изучение свойств нитрид-, карбидкремниевого (Si[3]N[4]-SiC) композиционного материала; Материалы и технологии новых поколений в современном материаловедении
द्वारा: Рыгин А. В.
प्रकाशित: (2015)
द्वारा: Рыгин А. В.
प्रकाशित: (2015)
Improved mechanical and thermal properties of quasi-ductile metal-ceramic laminated composites produced from Ta foils and Ti3Al(Si)C2 filled preceramic paper; Ceramics International; Vol. 51, iss. 23
प्रकाशित: (2025)
प्रकाशित: (2025)
Role of Testing Conditions in Formation of Tribological Layers at Line Contacts of Antifriction CF-Reinforced PI- and PEI-Based Composites; Molecules; Vol. 27, iss. 19
प्रकाशित: (2022)
प्रकाशित: (2022)
The effect of Si content on microstructure and mechanical properties of Ti–Al–Ta–Si–N coatings; Vacuum; Vol. 216
प्रकाशित: (2023)
प्रकाशित: (2023)
Изучение микроструктуры и свойств слоистого металлокерамического композита Ti/ZrB2-SiC; Перспективные материалы конструкционного и функционального назначения
द्वारा: Дегтярева Е. В. Евгения Витальевна
प्रकाशित: (2022)
द्वारा: Дегтярева Е. В. Евгения Витальевна
प्रकाशित: (2022)