Thermal Behavior and Flammability of Epoxy Composites Based on Multi-Walled Carbon Nanotubes and Expanded Graphite: A Comparative Study; Applied Sciences; Vol. 10, iss. 19
| Parent link: | Applied Sciences Vol. 10, iss. 19.— 2020.— [6928, 13 p.] |
|---|---|
| Corporate Author: | Национальный исследовательский Томский политехнический университет Инженерная школа неразрушающего контроля и безопасности Отделение контроля и диагностики |
| Other Authors: | Bannov A. G. Aleksandr Georgievich, Nazarenko O. B. Olga Bronislavovna, Maksimovsky E. A. Evgeny Anatoljevich, Popov M. V. Maksim Viktorovich, Berdyugina I. S. Irina Sergeevna |
| Summary: | Title screen Reduction of flammability and improvement of thermal stability of polymers during heating can be achieved by the introduction of fillers. Epoxy composites filled with different loadings of multi-walled carbon nanotubes (MWCNTs) and expanded graphite (EG) were prepared. The thermal oxidation stability of the prepared samples was investigated under heating in an oxidizing atmosphere using thermal analysis. The hardness was measured using the Shore D hardness test. The flammability of the prepared composites was evaluated by the ignition temperature and time-to-ignition. It was found that there was a rise in temperature corresponding to a 5% weight loss during heating for both epoxy/MWCNT and epoxy/EG composites compared to neat epoxy resin. The Shore D hardness of epoxy/MWCNT composites increased with content growth up to 0.1 wt.% and decreased with further concentration rise. The addition of MWCNTs and EG leads to an increase in the ignition temperature. It has been shown that MWCNTs improve the thermal behavior of epoxy resin in a low temperature region (below ~300 °C) whereas EG shows almost the same thermal behavior above 300 °C. The improvement of thermal properties can be achieved using MWCNTs and EG as fillers. |
| Language: | English |
| Published: |
2020
|
| Subjects: | |
| Online Access: | http://earchive.tpu.ru/handle/11683/64917 https://doi.org/10.3390/app10196928 |
| Format: | Electronic Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=663770 |
Similar Items
Thermal Stability and Flammability of Epoxy Composites Filled with Multi-Walled Carbon Nanotubes, Boric Acid, and Sodium Bicarbonate; Polymers; Vol. 13, iss. 4
Published: (2021)
Published: (2021)
A new approach to the economic synthesis of multi-walled carbon nanotubes using a Ni/MgO catalyst; Materials Chemistry and Physics; Vol. 261
Published: (2021)
Published: (2021)
The relationship between thermal management methods and hydrogen storage performance of the metal hydride tank; Journal of Materials Science & Technology; Vol. 203
Published: (2024)
Published: (2024)
Comparative study of active infrared thermography, ultrasonic laser vibrometry and laser ultrasonics in application to the inspection of graphite/epoxy composite parts; Quantitative InfraRed Thermography Journal; Vol. XX
Published: (2019)
Published: (2019)
The problems of utilizing graphite of stopped graphite-uranium reactors; Bulletin of the Tomsk Polytechnic University; Vol. 310, № 2
Published: (2007)
Published: (2007)
Исследование температуры воспламенения эпоксидных композитов, наполненных нанопорошком алюминия; Ресурсосберегающие технологии в контроле, управлении качеством и безопасности
Published: (2024)
Published: (2024)
Variation of Vickers microhardness and compression strength of the bioceramics based on hydroxyapatite by adding the multi-walled carbon nanotubes; Applied Nanoscience; Vol. 10, iss. 8
Published: (2019)
Published: (2019)
Study of irradiated graphite-bakelite paste; Nuclear Materials and Energy; Vol. 27
Published: (2021)
Published: (2021)
Electrochemical treatment of irradiated nuclear graphite; Journal of Nuclear Materials; Vol. 526
Published: (2019)
Published: (2019)
Thermophysical, Rheological and Morphological Properties of Polyoxymethylene Polymer Composite for Additive Technologies; Russian Physics Journal; Vol. 61, iss. 6
Published: (2018)
Published: (2018)
Study of evaporating the irradiated graphite in equilibrium low-temperature plasma; Thermophysics and Aeromechanics; Vol. 25, iss. 1
Published: (2018)
Published: (2018)
Enhancement of mechanical and electrical properties of epoxy-based composites filled with intact or oxidized carbon nanotubes; Composites: Mechanics, Computations, Applications: An International Journal; Vol. 10, iss. 3
Published: (2019)
Published: (2019)
The influence of single-walled carbon nanotubes additives on the structure and hydrogenation behavior of magnesium hydride; Journal of Energy Storage; Vol. 119
Published: (2025)
Published: (2025)
Trace elements in graphite and graphite-bearing marbles from Central and East Rhodopes, Bulgaria; Review of the Bulgarian Geological Society; Vol. 86, Pt 2
Published: (2025)
Published: (2025)
Hydrogen isotopic effect during the graphite high-temperature corrosion in water vapours; International Journal of Hydrogen Energy; Vol. 44, iss. 55
Published: (2019)
Published: (2019)
Determination of Gold by Stripping Voltammetry in Platinum Gold Ore Mineral Raw Materials on Grafite Electrode Modified by Bismuth; Procedia Chemistry; Vol. 10 : Chemistry and Chemical Engineering in XXI century
by: Dyachenko E. N. Elena Nikolaevna
Published: (2014)
by: Dyachenko E. N. Elena Nikolaevna
Published: (2014)
Effect of zeolite and boric acid on epoxy-based composites; Polymers for Advanced Technologies; Vol. 27, iss. 8
Published: (2016)
Published: (2016)
Thermooxidative Degradation of Composites Based on Epoxy Resin and Metal Nanopowders; Materials Science Forum; Vol. 942 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance
by: Lipchansky D. S. Dmitry Sergeevich
Published: (2019)
by: Lipchansky D. S. Dmitry Sergeevich
Published: (2019)
Study of the Graphite Electrode Surface with In and Pt Deposits; Advanced Materials Research; Vol. 1040 : High Technology: Research and Applications 2014 (HTRA 2014)
by: Ustinova E. M. Elvira Maratovna
Published: (2014)
by: Ustinova E. M. Elvira Maratovna
Published: (2014)
Mechanical and Rheological Properties of Biodegradable Polycaprolactone/Carbon Nanotube Composites; Russian Physics Journal; Vol. 63, iss. 4
by: Lebedev S. M. Sergey Mikhailovich
Published: (2020)
by: Lebedev S. M. Sergey Mikhailovich
Published: (2020)
Electrochemical response of gold nanoparticles at a graphite electrode; Advanced Materials Research; Vol. 1040 : High Technology: Research and Applications 2014 (HTRA 2014)
by: Perevezentseva D. O. Dariya Olegovna
Published: (2014)
by: Perevezentseva D. O. Dariya Olegovna
Published: (2014)
Электрохимическая обработка облученного графита уран графитовых ядерных реакторов; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 329, № 12
Published: (2018)
Published: (2018)
Electrochemical Activity of Glutathione at a Graphite Electrode Modified with Gold Nanoparticles; Oriental journal of chemistry; Vol. 31, № 2
Published: (2015)
Published: (2015)
Nanotubes and Nanowires
by: Rao C. N. R.
Published: (Cambridge, RSCPublishing, 2006)
by: Rao C. N. R.
Published: (Cambridge, RSCPublishing, 2006)
Polymer Brushes on Graphitic Carbon Nitride for Patterning and as a SERS Active Sensing Layer via Incorporated Nanoparticles; ACS Applied Materials and Interfaces; Vol. 12, iss. 8
Published: (2020)
Published: (2020)
Diffraction of real and virtual photons in a pyrolytic graphite crystal as source of intensive quasimonochromatic X-ray beam; Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms; Vol. 201, iss. 1 : Radiation from Relativistic Electrons in Periodic Structures (RREPS '01)
Published: (2003)
Published: (2003)
Analysis of the Causes of Irregular 36Cl Radionuclide Distribution in Irradiated Nuclear Graphite; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 14, iss. 1
Published: (2020)
Published: (2020)
Modification of surface pyrolytic graphite by nitrogen and argon plasma on air; Energy Fluxes and Radiation Effects (EFRE-2016)
Published: (2016)
Published: (2016)
Experimental comparison of parametric X-ray radiation and diffracted bremsstrahlung in a pyrolytic graphite crystal; Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms; Vol. 173, iss. 1-2 : Radiation from Relativistic Electrons in Periodic Structures
Published: (2001)
Published: (2001)
Effect of Operating Parameters on Formation Process of Defects in Moderator Block in Graphite Reactors; Journal of Industrial Pollution Control; Vol. 32, iss. 2
Published: (2017)
Published: (2017)
Fabrication and calibration of new carbon-14 reference standards using irradiated graphite from uranium–graphite reactors; Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment; Vol. 1003
Published: (2021)
Published: (2021)
Effect of the carbon support graphitization on the activity and thermal stability of Ru-Ba-Cs/C ammonia decomposition catalysts; Reaction Kinetics, Mechanisms and Catalysis; Vol. 127, iss. 1
Published: (2019)
Published: (2019)
Development of Bulk Lightweight Spherosilicate Material Technology Based on Sublimation of Expanded Polystyrene Granules; Refractories and Industrial Ceramics; Vol. 60, iss. 5
by: Nizhegorodov A. I. Anatoliy Ivanovich
Published: (2020)
by: Nizhegorodov A. I. Anatoliy Ivanovich
Published: (2020)
An alternative substrate for the investigation of two-dimensional materials; Высокие технологии в современной науке и технике (ВТСНТ-2017)
Published: (2017)
Published: (2017)
The influence of composition of asphaltenes of different genesis on the properties of carbon materials manufactured from them by plasma processing; Petroleum Science; Vol. 20, iss. 6
Published: (2023)
Published: (2023)
The influence of composition of asphaltenes of different genesis on the properties of carbon materials manufactured from them by plasma processing; Petroleum Science; Vol. 20, iss. 6
Published: (2023)
Published: (2023)
Twisted graphene in graphite: Impact on surface potential and chemical stability; Carbon; Vol. 176
Published: (2021)
Published: (2021)
Synthesis of New 1,4-Naphthoquinone Fluorosulfate Derivatives and the Study of Their Biological and Electrochemical Properties; International Journal of Molecular Sciences; Vol. 25, iss. 22
Published: (2024)
Published: (2024)
Polyhedral Graphite Particles Ambient Air Direct Current Arc Plasma Synthesis Supported by Molybdenum Catalyst; Energy Fluxes and Radiation Effects (EFRE-2020 online)
Published: (2020)
Published: (2020)
Determination of Platinum and Rhodium by Stripping Voltammetry; Journal of Analytical Chemistry; Vol. 76, iss. 12
by: Egoshina A. V. Anastasiya Vladimirovna
Published: (2021)
by: Egoshina A. V. Anastasiya Vladimirovna
Published: (2021)
Similar Items
-
Thermal Stability and Flammability of Epoxy Composites Filled with Multi-Walled Carbon Nanotubes, Boric Acid, and Sodium Bicarbonate; Polymers; Vol. 13, iss. 4
Published: (2021) -
A new approach to the economic synthesis of multi-walled carbon nanotubes using a Ni/MgO catalyst; Materials Chemistry and Physics; Vol. 261
Published: (2021) -
The relationship between thermal management methods and hydrogen storage performance of the metal hydride tank; Journal of Materials Science & Technology; Vol. 203
Published: (2024) -
Comparative study of active infrared thermography, ultrasonic laser vibrometry and laser ultrasonics in application to the inspection of graphite/epoxy composite parts; Quantitative InfraRed Thermography Journal; Vol. XX
Published: (2019) -
The problems of utilizing graphite of stopped graphite-uranium reactors; Bulletin of the Tomsk Polytechnic University; Vol. 310, № 2
Published: (2007)