Effect of carbon shell on stabilization of single-phase lanthanum and praseodymium hexaaluminates prepared by a modified Pechini method
| Parent link: | Ceramics International Vol. 46, iss. 18.— 2020.— [P. 29150-29159] |
|---|---|
| Müşterek Yazar: | Национальный исследовательский Томский политехнический университет Исследовательская школа химических и биомедицинских технологий |
| Diğer Yazarlar: | Stoyanovskii V. O. Vladimir, Vedyagin A. A. Aleksey Anatolievich, Volodin A. M. Aleksandr, Bespalko Yu. N. Yuliya |
| Özet: | Title screen A modified Pechini method involving the formation of carbon shell was proposed and used for the synthesis of the unsubstituted lanthanum and praseodymium hexaaluminates with the magnetoplumbite structure. The peculiarities of the LaAlO3 and LaAl11O18 phases' formation were studied in a wide temperature range starting from their appearance at 700 °C and finishing at 1300 °C when the complete phase formation occurs. It was found that the size of the formed hexaaluminate's crystallites is a crucial factor affecting the phase purity of the final product. The critical size of the thermodynamic stability of the LaAlO3 phase is supposed to be 10 nm, which corresponds to the specific surface area of 90 m2/g. The use of a carbon template approach leading to the formation of a core-shell structure during the synthesis procedure allows stabilizing the oxide particles in size and preventing their agglomeration at high temperatures. Depending on the carbon template nature, the carbon content in the samples was found to be 13 wt% (low-carbon-shelled samples) and 40 wt% (high-carbon-shelled samples). In the case of high carbon content, the resulting LaAl11O18 and PrAl11O18 hexaaluminates possess the surface areas as high as 160 m2/g. Режим доступа: по договору с организацией-держателем ресурса |
| Dil: | İngilizce |
| Baskı/Yayın Bilgisi: |
2020
|
| Konular: | |
| Online Erişim: | https://doi.org/10.1016/j.ceramint.2020.08.088 |
| Materyal Türü: | Elektronik Kitap Bölümü |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=663633 |
Benzer Materyaller
Structural Changes of High-Temperature Nickel Alloy Containing Rhenium and Lanthanum on Heat Treatment
Baskı/Yayın Bilgisi: (2018)
Baskı/Yayın Bilgisi: (2018)
Exploring metastable phase formation: Swift heavy ion effects on partially stabilized zirconia
Baskı/Yayın Bilgisi: (2024)
Baskı/Yayın Bilgisi: (2024)
Изменение структуры жаропрочного сплава, легированного рением и лантаном, в зависимости от термической обработки
Baskı/Yayın Bilgisi: (2018)
Baskı/Yayın Bilgisi: (2018)
Electric arc synthesis of lanthanum hexaboride
Yazar:: Spodina A. V. Anastasiya Vyacheslavovna
Baskı/Yayın Bilgisi: (2025)
Yazar:: Spodina A. V. Anastasiya Vyacheslavovna
Baskı/Yayın Bilgisi: (2025)
Influence of Oxidative Treatment and Platinum Content on the Stability of the Pt/Sibunit System in an Oxidizing Atmosphere at Elevated Temperatures
Baskı/Yayın Bilgisi: (2020)
Baskı/Yayın Bilgisi: (2020)
Mathematical model of a record type device for valued components recovery from end process gases of uranium hexafluoride production
Yazar:: Bereza V. N.
Baskı/Yayın Bilgisi: (2007)
Yazar:: Bereza V. N.
Baskı/Yayın Bilgisi: (2007)
Analysis of the Physicochemical Characteristics of Biochar Obtained by Slow Pyrolysis of Nut Shells in a Nitrogen Atmosphere
Baskı/Yayın Bilgisi: (2021)
Baskı/Yayın Bilgisi: (2021)
In Situ Synchrotron Study of the Phase Transformations in Ti-5.7Al-1.6V-3Mo Titanium Alloy at High Temperature
Yazar:: Perevalova O. B. Olga Borisovna
Baskı/Yayın Bilgisi: (2024)
Yazar:: Perevalova O. B. Olga Borisovna
Baskı/Yayın Bilgisi: (2024)
Vacuum-free electric arc method for synthesis of lanthanum hexaboride
Baskı/Yayın Bilgisi: (2025)
Baskı/Yayın Bilgisi: (2025)
Effect of Sibunite Graphitization on the Stability of Ru (Pt, Pd)/Sibunit Catalysts in an Oxidizing Atmosphere at Elevated Temperatures
Baskı/Yayın Bilgisi: (2021)
Baskı/Yayın Bilgisi: (2021)
Mathematical model of plasma-based composite coating deposition
Yazar:: Shanin S. A. Sergei Aleksandrovich
Baskı/Yayın Bilgisi: (2014)
Yazar:: Shanin S. A. Sergei Aleksandrovich
Baskı/Yayın Bilgisi: (2014)
In situ study of phase transformations in electron beam additive manufactured Ti-6Al-4 V titanium alloy by high temperature synchrotron X-ray diffraction and TEM
Yazar:: Perevalova O. B. Olga Borisovna
Baskı/Yayın Bilgisi: (2022)
Yazar:: Perevalova O. B. Olga Borisovna
Baskı/Yayın Bilgisi: (2022)
Исследование изменений глобального климата как сложной системы с использованием вейвлетных фазо-частотных функций, фазо-частотных и фазо-временных характеристик гелиокосмических и климатических переменных. Часть 1
Yazar:: Алексеев В. И. Валерий Иванович
Baskı/Yayın Bilgisi: (2020)
Yazar:: Алексеев В. И. Валерий Иванович
Baskı/Yayın Bilgisi: (2020)
The Structure and Properties of Microcrystalline and Submicrocrystalline Titanium Alloy VT1-0 in the Area of the Electron Beam Welding Seam
Baskı/Yayın Bilgisi: (2017)
Baskı/Yayın Bilgisi: (2017)
From raw elements to 3D samples: An economical route for Co-Cr-Mo alloy fabrication
Baskı/Yayın Bilgisi: (2024)
Baskı/Yayın Bilgisi: (2024)
Surface Vaporization of High-Strength Aluminum Alloy During Electron-Beam Welding
Baskı/Yayın Bilgisi: (2022)
Baskı/Yayın Bilgisi: (2022)
Оценка времени запаздывания фазочастотным методом по ограниченному набору спектральных отсчётов
Yazar:: Воеводин К. Д. Кирилл Дмитриевич
Baskı/Yayın Bilgisi: (2023)
Yazar:: Воеводин К. Д. Кирилл Дмитриевич
Baskı/Yayın Bilgisi: (2023)
Improved phase stability of the metastable K2GeF6:Mn4+ phosphors with high thermal stability and water-proof property by cation substitution
Baskı/Yayın Bilgisi: (2020)
Baskı/Yayın Bilgisi: (2020)
The High-Temperature In Situ Synchrotron Study of the Structural-Phase Transformations in 3D-Printed Ti–6Al–4V and Ti–5Al–3Mo–V Titanium Alloys
Baskı/Yayın Bilgisi: (2024)
Baskı/Yayın Bilgisi: (2024)
Анализ влияния оребрения внешней поверхности термостабилизатора на эффективность охлаждения грунта
Baskı/Yayın Bilgisi: (2024)
Baskı/Yayın Bilgisi: (2024)
Evolution of the Structural-Phase State of a Titanium Alloy of the System Ti–Al–V–Mo During Formation of an Ultrafine-Grained Structure Using Reversible Hydrogenaтion
Baskı/Yayın Bilgisi: (2019)
Baskı/Yayın Bilgisi: (2019)
Structural-Phase State and Morphology of a Composite Based on Magnesium Hydride and Nanosized Aluminum Powder Obtained by Electrical Explosion of Wires
Yazar:: Kudiyarov V. N. Victor Nikolaevich
Baskı/Yayın Bilgisi: (2024)
Yazar:: Kudiyarov V. N. Victor Nikolaevich
Baskı/Yayın Bilgisi: (2024)
Control System for an Object with Interval-Given Parameters: Quality Analysis Based on Leading Coefficients of Characteristic Polynomials
Baskı/Yayın Bilgisi: (2018)
Baskı/Yayın Bilgisi: (2018)
The Microstructural and Phase Evolution of the 3D Printed Ti-6Al-4V Alloy during Mechanical Loading
Baskı/Yayın Bilgisi: (2023)
Baskı/Yayın Bilgisi: (2023)
Исследование изменений глобального климата с использованием вейвлетных фазо-частотных функций, фазо-частотных и фазо-временных характеристик гелокосмических и климатических переменных. Часть 2
Yazar:: Алексеев В. И. Валерий Иванович
Baskı/Yayın Bilgisi: (2020)
Yazar:: Алексеев В. И. Валерий Иванович
Baskı/Yayın Bilgisi: (2020)
Thermal Stability of TiZrAlN and TiZrSiN Films Formed by Reactive Magnetron Sputtering
Baskı/Yayın Bilgisi: (2018)
Baskı/Yayın Bilgisi: (2018)
Получение и свойства вольфрамата циркония с аномальными тепловыми характеристиками
Baskı/Yayın Bilgisi: (2014)
Baskı/Yayın Bilgisi: (2014)
Structure and properties of welding joints of 1370 aluminum alloy obtained by electron-beam welding
Yazar:: Solov’ev V. V. Vasily Vladimirovich
Baskı/Yayın Bilgisi: (2025)
Yazar:: Solov’ev V. V. Vasily Vladimirovich
Baskı/Yayın Bilgisi: (2025)
The influence of lanthanum content in the Fe2O3-Li2O-La(OH)3 system on phase formation and properties of composite material
Baskı/Yayın Bilgisi: (2025)
Baskı/Yayın Bilgisi: (2025)
Study of phase transformation and surface microstructure of alumina ceramic under irradiation of intense pulsed ion beam
Baskı/Yayın Bilgisi: (2021)
Baskı/Yayın Bilgisi: (2021)
Recovery of Scratch Grooves in Ti-6Al-4V Alloy Caused by Reversible Phase Transformations
Baskı/Yayın Bilgisi: (2020)
Baskı/Yayın Bilgisi: (2020)
Change in γ radiation properties due to cooling of single-crystal targets
Baskı/Yayın Bilgisi: (1991)
Baskı/Yayın Bilgisi: (1991)
Application of Phase-Reversal Fresnel Zone Plates for Improving The Elevation Resolution in Ultrasonic Testing with Phased Arrays
Baskı/Yayın Bilgisi: (2019)
Baskı/Yayın Bilgisi: (2019)
Complex Oxide with Negative Thermal Expansion for Producing Ceramic Matrix Composites with Invar Effect
Baskı/Yayın Bilgisi: (2016)
Baskı/Yayın Bilgisi: (2016)
Modeling of a Double Gas Hydrate Particle Ignition
Baskı/Yayın Bilgisi: (2022)
Baskı/Yayın Bilgisi: (2022)
Surface Modification of the EBM Ti-6Al-4V Alloy by Pulsed Ion Beam
Baskı/Yayın Bilgisi: (2021)
Baskı/Yayın Bilgisi: (2021)
The Effect of Nanoscale Mesoscopic Structural States Associated with Lattice Curvature on the Mechanical Behavior of Ti–6Al–4V Alloy
Baskı/Yayın Bilgisi: (2020)
Baskı/Yayın Bilgisi: (2020)
Research of Fluorination Process of Rutile Concentrate
Baskı/Yayın Bilgisi: (2014)
Baskı/Yayın Bilgisi: (2014)
Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment. Part I. Commercially Pure Titanium
Baskı/Yayın Bilgisi: (2021)
Baskı/Yayın Bilgisi: (2021)
Mathematical Simulation of the Heat and Mass Transfer in the Movement of Liquid Droplets in a Gas Medium Under the Conditions of their Intense Phase Transformations
Yazar:: Antonov D. V. Dmitry Vladimirovich
Baskı/Yayın Bilgisi: (2020)
Yazar:: Antonov D. V. Dmitry Vladimirovich
Baskı/Yayın Bilgisi: (2020)
Benzer Materyaller
-
Structural Changes of High-Temperature Nickel Alloy Containing Rhenium and Lanthanum on Heat Treatment
Baskı/Yayın Bilgisi: (2018) -
Exploring metastable phase formation: Swift heavy ion effects on partially stabilized zirconia
Baskı/Yayın Bilgisi: (2024) -
Изменение структуры жаропрочного сплава, легированного рением и лантаном, в зависимости от термической обработки
Baskı/Yayın Bilgisi: (2018) -
Electric arc synthesis of lanthanum hexaboride
Yazar:: Spodina A. V. Anastasiya Vyacheslavovna
Baskı/Yayın Bilgisi: (2025) -
Influence of Oxidative Treatment and Platinum Content on the Stability of the Pt/Sibunit System in an Oxidizing Atmosphere at Elevated Temperatures
Baskı/Yayın Bilgisi: (2020)