Influence of long-term cold climate operation on structure, fatigue durability and impact toughness of 09Mn2Si pipe steel; Engineering Failure Analysis; Vol. 102

Influence of long-term cold climate operation on structure, fatigue durability and impact toughness of 09Mn2Si pipe steel; Engineering Failure Analysis; Vol. 102

Chi tiết về thư mục
Parent link:	Engineering Failure Analysis Vol. 102.— 2019.— [P. 87-101]
Tác giả của công ty:	Национальный исследовательский Томский политехнический университет Инженерная школа новых производственных технологий Отделение материаловедения
Tác giả khác:	Panin S. V. Sergey Viktorovich, Vlasov I. V. Ilya Viktorovich, Marushchak P. O. Pavel Orestovich, Eremin A. V. Aleksandr Vyacheslavovich, Berto F. Filippo, Syromyatnikova A. S. Aytalina Stepanovna, Vinogradov A. Yu. Aleksey Yurjevich
Tóm tắt:	Title screen The microstructure and mechanical properties of 09Mn2Si steel used for the transmission natural gas pipeline “Mastakh-Berge-Yakutsk” have been investigated comprehensively after 37?years of operation. The results obtained for the specimens cut from the pipe were compared to those obtained using the preserved (reference) specimens. It is demonstrated that long-term operation in harsh climate does change the pearlitic microstructure appreciably. The strain aging however can be noticed through precipitation of finely dispersed carbides in the grain interior. The latter causes some embrittlement of the steel measured under impact loading. Revealed microstructural changes are not practically important for “quasi-static” tension or hardness properties. Nonetheless, under cyclic testing the microstructure degradation, which occurred during long-term operation, results in a considerable reduction of fatigue life, which is particularly pronounced during the crack initiation stage. The microstructure degradation is most clearly seen in sharply reduced impact toughness which dropped by a factor of two at temperatures below zero Centigrade. Reasons and mechanisms of the observed phenomena are discussed. Режим доступа: по договору с организацией-держателем ресурса
Ngôn ngữ:	Tiếng Anh
Được phát hành:	2019
Những chủ đề:	электронный ресурс труды учёных ТПУ pipeline steel structure degradation hydrogen embrittlement impact toughness fatigue assessment трубопроводные стали хрупкость ударная вязкость
Truy cập trực tuyến:	https://doi.org/10.1016/j.engfailanal.2019.04.036
Định dạng:	Điện tử Chương của sách
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=663549

Những quyển sách tương tự

Influence of long-term operation on structure, fatigue durability and impact toughness of 09Mn2Si pipe steel; Procedia Structural Integrity; Vol. 5 : 2nd International Conference on Structural Integrity, ICSI 2017, 4-7 September 2017, Funchal, Madeira, Portugal
Được phát hành: (2017)

Effect of Operating Degradation in Arctic Conditions on Physical and Mechanical Properties of 09Mn2Si Pipeline Steel; Procedia Engineering; Vol. 178 : Reliability and Statistics in Transportation and Communication (RelStat-2016)
Được phát hành: (2017)

Temperature Effect on Deformation and Fracture Mechanisms under Impact Loading of 17Mn1Si Steel with Explicit Accounting Structural Heterogeneity; Procedia Engineering; Vol. 187 : TransBaltica 2017: Transportation science and technology
Được phát hành: (2017)

The Influence of Regimes of Thermomechanical Treatment on the Structural-Phase State, Mechanical Properties, and Fracture Toughness of Low-Alloy Steel API 5L Grade X52; Russian Physics Journal; Vol. 61, iss. 11
Bằng: Derevyagina L. S. Lyudmila Sergeevna
Được phát hành: (2019)

Modification of the Structure of Low-Carbon Pipe Steel by Helical Rolling, and the Increase in Its Strength and Cold Resistance; Physics of Metals and Metallography; Vol. 119, iss. 1
Được phát hành: (2018)

Nanoscale Mesoscopic Structural States in Low-Alloy Steels for Martensitic Phase Formation and Low-Temperature Toughness Enhancement; Physical Mesomechanics; Vol. 23, iss. 5
Được phát hành: (2020)

Nanoscale Mesoscopic Structural States in Low-Alloy Steels for Martensitic Phase Formation and Low-Temperature Toughness Enhancement; Physical Mesomechanics; Vol. 23, iss. 5
Được phát hành: (2021)

Effect of helical rolling on the bainitic microstructure and impact toughness of the low-carbon microalloyed steel; Materials Science and Engineering: A; Vol. 816
Được phát hành: (2021)

Fractography, Fracture Toughness and Structural Turbulence Under Low-Temperature Shock Loading of a Nonequilibrium Titanium Alloy Ti-6Al-4V; Mechanics of Solids; Vol. 55, iss. 5
Được phát hành: (2020)

Influence of high intensity ion beam irradiation on impact toughness of 12Cr1MoV steel; Procedia Structural Integrity; Vol. 2 : 21st European Conference on Fracture: ECF21, 20-24 June 2016, Catania, Italy
Được phát hành: (2016)

Hydrogen-induced failure of TiNi based alloy with coarse-grained and ultrafine-grained structure; Procedia Structural Integrity; Vol. 2: 21st European Conference on Fracture: ECF21, 20-24 June 2016, Catania, Italy
Được phát hành: (2016)

Hydrogen accumulation and distribution in pipeline steel in intensified corrosion conditions; Materials; Vol. 12 iss. 9
Được phát hành: (2019)

Effect of long-term operation on steels of main gas pipeline: Structural and mechanical degradation; Journal of King Saud University - Engineering Sciences; Vol. 30, iss. 4
Được phát hành: (2018)

Microstructure of intercritical heat affected zone and toughness of microalloyed steel laser welds; Materials Science and Engineering: A; Vol. 770
Được phát hành: (2020)

The role of nanoscale strain-induced defects in the sharp increase of low-temperature toughness in low-carbon and low-alloy steels; Materials Science and Engineering: A; Vol. 768
Được phát hành: (2019)

Multi-Pass Laser and Hybrid Laser-Arc Narrow-Gap Welding of Steel Butt Joints; Materials Science Forum; Vol. 927 : Materials and Processing Technology II
Được phát hành: (2018)

Change in the Properties of Rail Steels during Operation and Reutilization of Rails; Metals; Vol. 13, iss. 6
Được phát hành: (2023)

Fracture resistance of the deposited metal under dynamic and cyclic loading; Structural Integrity and Life; Vol. 24, № 2
Được phát hành: (2024)

Some aspects of reliability prediction of chemical industry and hydrogen energy facilities (vessels, machinery and equipment) operated in emergency situations and extreme conditions; International Journal of Hydrogen Energy; Vol. 86
Được phát hành: (2024)

Low-Temperature Deformation and Fracture of Cr-Mn-N Stainless Steel: Tensile and Impact Bending Tests; Metals; Vol. 13, iss. 1
Được phát hành: (2023)

Effect of Ultrasonic Impact Treatment on Microstructure and Fatigue Life of 3D Printed Ti–6Al–4V Titanium Alloy; Physics of Metals and Metallography; Vol. 124, iss. 10
Được phát hành: (2023)

Impact toughness of nanocomposite materials filled with fullerene c60particles; Composites: Mechanics, Computations, Applications: An International Journal; Vol. 9, iss. 2
Được phát hành: (2018)

Effect of the Lattice Curvature of Ti-6Al-4V Titanium Alloy on Their Fatigue Life and Fracture Toughness; Physical Mesomechanics; Vol. 23, iss. 5
Được phát hành: (2020)

Evaluation of fracture toughness of hybrid CNT/CFRP composites; Mechanics of Advanced Materials and Structures; Vol. XX, No. XX
Bằng: Burkov M. V. Mikhail Vladimirovich
Được phát hành: (2022)

The Effect of Nanoscale Mesoscopic Structural States Associated with Lattice Curvature on the Mechanical Behavior of Ti–6Al–4V Alloy; Physical Mesomechanics; Vol. 23, iss. 6
Được phát hành: (2020)

Structural and Mechanical Degradation of 09Mn2Si Pipe Steel after Long-Term Operation; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Được phát hành: (2017)

Effect of Nanosize Tungsten Powder on the Microstructure and Mechanical Properties of Silumins; Metal Science and Heat Treatment; Vol. 61, iss. 3-4
Bằng: Zykova A. P. Anna Petrovna
Được phát hành: (2019)

Increasing the Fatigue Durability of an 3D-Printed Ti-6Al-4V Alloy Electron-Beam Welded Joint by Ultrasonic Electropulsing Shock Treatment; Physics of Metals and Metallography; Vol. 123, iss. 12
Được phát hành: (2022)

Расчетно-экспериментальная методика оценки остаточного ресурса газопровода по усталостной прочности; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 330, № 12
Bằng: Сызранцев В. Н. Владимир Николаевич
Được phát hành: (2019)

Oil Product Loss Identification per Pressure Variations in Time at Four Controlled Pipe Cross-Sections; Automation and Remote Control; Vol. 81, No. 1
Bằng: Mamonova T. E. Tatiana Egorovna
Được phát hành: (2020)

Algorithm of fatigue crack detection and determination of its tip position in optical images; Optoelectronics, Instrumentation and Data Processing; Vol. 53, iss. 3
Được phát hành: (2017)

Estimating Low- and High-Cyclic Fatigue of Polyimide-CF-PTFE Composite through Variation of Mechanical Hysteresis Loops; Materials; Vol. 15, iss. 13
Được phát hành: (2022)

An Automated Optical Strain Measurement System for Estimating Polymer Degradation under Fatigue Testing; Sensors; Vol. 22, iss. 16
Được phát hành: (2022)

Оценка влияния производственной деятельности магистральных газопроводов Новосибирской области на состояние окружающей среды; Информационные технологии (IT) в контроле, управлении качеством и безопасности
Bằng: Чернышкина К. О. Карина Олеговна
Được phát hành: (2019)

Application of the Electrochemical Permeation Method for Hydrogen Diffusion Coefficient Determination in Pipeline Steel 10G2; Coatings; Vol. 11, iss. 10
Được phát hành: (2021)

Перспективы использования водорода; Перспективы развития фундаментальных наук; Т. 1 : Физика
Bằng: Шампиева А. Т.
Được phát hành: (2025)

The effect of crater creation on the fatigue strength and corrosion resistance of steels and titanium alloys irradiated by high-power pulsed ion beams; Surface and Coatings Technology; Vol. 158-159
Bằng: Shulov V. A.
Được phát hành: (2002)

Use of reinforcing elements to improve fatigue strength of steel structures of mine hoisting machines (MHM); Metalurgija; Vol. 59, № 1
Được phát hành: (2020)

Strengthening elements to increase fatigue strength of mine hoisting machine steel structures; Metalurgija; Vol. 61, No. 1
Được phát hành: (2022)

Fracture toughness and abrasive wear of (ZrTi)B2–SiC ceramic composites with low-modulus hexagonal boron nitride inclusions; Ceramics International; Vol. 51, iss. 18, Pt. B
Được phát hành: (2025)