Physico-Mathematical Modeling and Experimental Study of Cracks in Concrete Obtained by Exposure to a Pulsed High Voltage Discharge; Energy Fluxes and Radiation Effects (EFRE-2020 online)

Physico-Mathematical Modeling and Experimental Study of Cracks in Concrete Obtained by Exposure to a Pulsed High Voltage Discharge; Energy Fluxes and Radiation Effects (EFRE-2020 online)

מידע ביבליוגרפי
Parent link:	Energy Fluxes and Radiation Effects (EFRE-2020 online).— 2020.— [P. 937-941]
מחבר תאגידי:	National Research Tomsk Polytechnic University
מחברים אחרים:	Hongda Li, Lukanin A. Alexander, Long Che, Tskhe A. Alexander, Sosnovskiy S. Sergei, Tskhe A. Anna
סיכום:	Title screen Based on orthogonal design, 10 indoor experiments of high voltage pulse discharge breaking concrete and measurement of crack depth loss of concrete on three factors such as applied voltage, pulse number and discharge electrodes gap were carried out at three levels. The effects of these three factors on the crack depth loss of concrete were studied by using range analysis and significance analysis test data. When the applied voltage is about 320 kV and the pulse number is 5, the crack depth loss of concrete can be broken by high voltage pulse discharge that is the largest. Our study concerns the energy transferred from the plasma created in the channel of a discharge to a concrete substance. Our study includes both experiment and modeling. The possibility of generating nanoparticles of Si, Al, Fe, Ca. A thermodynamic study of the plasma-chemical processes occurring in the channel of the discharge was carried out, which made it possible to determine the possibility of the formation of certain amounts of chemical compounds under given conditions. Thermodynamic analysis uses the universal TERRA program. Режим доступа: по договору с организацией-держателем ресурса
שפה:	אנגלית
יצא לאור:	2020
נושאים:	электронный ресурс труды учёных ТПУ high voltage pulse discharge cracking crack depth loss thermodynamics experimental setup physical and mathematical modeling nanoparticles импульсные разряды трещины термодинамика экспериментальные установки физико-математическое моделирование наночастицы
גישה מקוונת:	https://doi.org/10.1109/EFRE47760.2020.9242096
פורמט:	אלקטרוני Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=663081

פריטים דומים

Integrated mathematical modeling of catalytic cracking and zeolite-containing catalyst oxidative regeneration; Petroleum Science and Technology; Vol. 38, iss. 12
יצא לאור: (2020)

Creation of Non-stationary Volume Discharge Inside Cylindrical Microwave Resonator; Energy Fluxes and Radiation Effects (EFRE-2020 online)
יצא לאור: (2020)

Coniferous Tree Ignition by Cloud-to-Ground Lightning Discharge Using Approximation of "Ideal" Crack in Bark; JP Journal of Heat and Mass Transfer; Vol. 14, iss. 1
מאת: Baranovskiy N. V. Nikolay Viktorovich
יצא לאור: (2016)

Synergy of crack closure, near-tip residual stress and crack-tip blunting in crack growth under periodic overloads – A fractographic study; International Journal of Fatigue; Vol. 93, pt. 1
יצא לאור: (2016)

DIC Study of Fatigue Crack Growth after Single Overloads and Underloads; Procedia Structural Integrity; Vol. 5 : 2nd International Conference on Structural Integrity, ICSI 2017, 4-7 September 2017, Funchal, Madeira, Portugal
יצא לאור: (2017)

Corrections of Voltage Loss in Oxyhydrogen Fuel Cells; Batteries; Vol. 6, iss. 1
מאת: Lyu Jinzhe
יצא לאור: (2020)

Recycling of Plastic Waste: How the Conditions of Thermal Cracking and the Composition of Plastic Mixtures Affect Product Yield; Recycling; Vol. 11, iss. 2
יצא לאור: (2026)

Прогнозирование содержания сернистых соединений и общей серы в продуктах каталитического крекинга при переработке гидроочищенного и негидроочищенного нефтяного сырья; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 335, № 3
יצא לאור: (2024)

Spatial stabilization of arc discharges in pulsed gas tungsten arc welding; Welding in the World; Vol. 68, iss. 9
יצא לאור: (2024)

Redesigning of feed injection nozzles distribution for catalytic cracking riser-reactor aims for increasing the yield of light gases (C1–C4); Химия и химическая технология в XXI веке; Т. 2
מאת: Foroutan S. G.
יצא לאור: (2025)

High-voltage pulse bushing with induced voltage distribution between sections; Vacuum; Vol. 194
מאת: Poloskov A. V. Artem Viktorovich
יצא לאור: (2021)

Физические основы неразрушающего контроля изоляции обмоток электроприводов горношахтного и нефтепромыслового оборудования; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 327, № 2
מאת: Смирнов Г. В. Геннадий Васильевич
יצא לאור: (2016)

Development and Study of the Properties of Impact-Resistant Ceramic Nanocomposite Coatings for Silicon; Glass and Ceramics; Vol. 77, iss. 3-4
יצא לאור: (2020)

Cracking of Heavy Hydrocarbon Feedstocks in the Presence of Cobalt; Catalysis in Industry; Vol. 10, iss. 3
יצא לאור: (2018)

Influence of the Configuration of Feedstock Injection Nozzles on the Hydrodynamic Regime and Performance of the Catalytic Cracking Riser-Reactor for Production of Light Olefins Using CFD Modeling; Russian Journal of Applied Chemistry; Vol. 98, iss. 2
מאת: Forutan K. S. Kazvini Saba
יצא לאור: (2025)

Algorithm of fatigue crack detection and determination of its tip position in optical images; Optoelectronics, Instrumentation and Data Processing; Vol. 53, iss. 3
יצא לאור: (2017)

Расчет термодинамических и кинетических параметров реакций каталитического крекинга с участием кислотных центров Льюиса и Брёнстеда; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 334, № 7
מאת: Назарова Г. Ю. Галина Юрьевна
יצא לאור: (2023)

Термодинамический анализ реакций получения низших олефинов в технологии FCC на основе учета функциональных групп в молекулах углеводородов и квантовой химии; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 333, № 11
מאת: Ивашкина Е. Н. Елена Николаевна
יצא לאור: (2022)

Influence of plasma jet on the cracking of water/oil biofuel feedstocks intensified by explosive boiling; Chemical Engineering Journal; Vol. 530
מאת: Antonov D. V. Dmitry Vladimirovich
יצא לאור: (2026)

Acoustic emission study on the effect of notch shape and temperature on elastic energy release during impact testing of 17Mn1Si pipe steel; Engineering Fracture Mechanics; Vol. 210
יצא לאור: (2019)

Research of crack initiation and propagation under loading for providing impact resilience of protective coating; Functional Materials; Vol. 26, № 1
יצא לאור: (2019)

New characterization models for macroscopic chemical-hydrodynamic behavior of catalytic cracking riser-reactor with interactive patterns of severe operating conditions using CFD calculations; Journal of the Taiwan Institute of Chemical Engineers; Vol. 165
מאת: Foroutan G. S. Ghazvini Saba
יצא לאור: (2024)

Composition of Initiated Cracking Products of High-sulfur Natural Bitumen; Procedia Chemistry; Vol. 10 : Chemistry and Chemical Engineering in XXI century
יצא לאור: (2014)

Crack healing of ferrosilicochromium-filled polymer-derived ceramiccomposites; Journal of the European Ceramic Society; Vol. 38, iss. 6
יצא לאור: (2018)

The quantity and amorphicity determination of oxidable coke on the zeolite-containing catalysts of cracking; Petroleum and Coal; Vol. 61, iss. 5
יצא לאור: (2019)

Dose Depth Distribution of Pulsed Electron Beam with Wide Electron Kinetic Energy Spectrum for Polyethylene Target; Energy Fluxes and Radiation Effects (EFRE-2020 online)
מאת: Serebrennikov M. A. Maksim Anatolevich
יצא לאור: (2020)

Modeling of the catalytic cracking: Catalyst deactivation by coke and heavy metals; Fuel Processing Technology; Vol. 200
יצא לאור: (2020)

Increasing the economic efficiency of gasoline production: Reducing the quality giveaway and simulation of catalytic cracking and compounding; Fuel Processing Technology; Vol. 196
יצא לאור: (2019)

A predictive model of catalytic cracking: Feedstock-induced changes in gasoline and gas composition; Fuel Processing Technology; Vol. 217
יצא לאור: (2021)

Low Cost Embedded Copper Mesh Based on Cracked Template for Highly Durability Transparent EMI Shielding Films; Materials; Vol. 15, iss. 4
יצא לאור: (2022)

Study of crack resistance of TiAlN coatings by scratch testing; Physical Mesomechanics; Vol. 20, iss. 2
יצא לאור: (2017)

High-Voltage Equipment of Power Systems; Design, Principles of Operation, Testing, Monitoring and Diagnostics
מאת: Ushakov V. Ya. Vasily Yakovlevich
יצא לאור: (Cham, Springer Nature, 2023)

Prediction of the light product yield from the catalytic cracking unit using the mathematical model; 11th International Forum on Strategic Technology (IFOST 2016); Pt. 2
יצא לאור: (2016)

Ignition Different Mode of Corona Discharge in Air at Atmospheric Pressure; Energy Fluxes and Radiation Effects (EFRE-2020 online)
יצא לאור: (2020)

On Improving the Technology of Pulse-Flaw Detection of High-Voltage Power Transformer Windings; Russian Electrical Engineering; Vol. 94, iss. 2
מאת: Mytnikov A. V. Aleksey Vladimirovich
יצא לאור: (2023)

Двухфазный повышающий преобразователь с мягкой коммутацией транзисторов и особенности его динамических свойств; Известия Томского политехнического университета [Известия ТПУ]; Т. 324, № 4 : Техника и технологии в энергетике
יצא לאור: (2014)

Design and testing of fluid resistor for repetitive high-voltage pulse generator; Energy Fluxes and Radiation Effects (EFRE-2016)
יצא לאור: (2016)

Combined action of crack closure and residual stress under periodic overloads: A fractographic analysis; International Journal of Fatigue; Vol. 82, pt. 3
יצא לאור: (2016)

Technique of definition of cracking resistance characteristics of metal plates and envelopes of small thickness; Bulletin of the Tomsk Polytechnic University; Vol. 309, № 4
מאת: Solyanik A. S.
יצא לאור: (2006)

The forecasting of the catalytic cracking products yield depending on the feedstock composition and the catalyst activity; Petroleum and Coal; Vol. 61, iss. 6
יצא לאור: (2019)