Direct Fluorination as Method of Improvement of Operational Properties of Polymeric Materials; Polymers; Vol. 12, iss. 12

Direct Fluorination as Method of Improvement of Operational Properties of Polymeric Materials; Polymers; Vol. 12, iss. 12

Bibliographic Details
Parent link:	Polymers Vol. 12, iss. 12.— 2020.— [2836, 10 p.]
Corporate Author:	Национальный исследовательский Томский политехнический университет Инжиниринговый центр Научная лаборатория жидкофазного фторирования органических веществ
Other Authors:	Belov N. A. Nikolay Alexandrovich, Alentjev (Alentiev) A. Yu. Aleksandr Yurjevich, Bogdanova Yu. G. Yulia, Vdovichenko A. Yu. Artem, Pashkevich D. S. Dmitry Stanislavovich
Summary:	Title screen Direct fluorination of polymers is a widely utilized technique for chemical modification. Such introduction of fluorine into the chemical structure of polymeric materials leads to laminates with highly fluorinated surface layer. The physicochemical properties of this layer are similar to those of perfluorinated polymers that differ by a unique combination of chemical resistance, weak adhesion, low cohesion, and permittivity, often barrier properties, etc. Surface modification by elemental fluorine allows one to avoid laborious synthesis of perfluoropolymers and impart such properties to industrial polymeric materials. The current review is devoted to a detailed consideration of wetting by water, energy characteristics of surfaces, adhesion, mechanical and electrical properties of the polymers, and composites after the direct fluorination.
Language:	English
Published:	2020
Subjects:	электронный ресурс труды учёных ТПУ fluorination polymer surface properties mechanical properties wetting Young modulus elongation permittivity surface conductivity фторирование полимеры механические свойства смачивание модуль Юнга поверхностная проводимость
Online Access:	https://doi.org/10.3390/polym12122836
Format:	Electronic Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=662939

Similar Items

Effect of Direct Fluorination on the Transport Properties and Swelling of Polymeric Materials: A Review; Membranes; Vol. 11, iss. 9
Published: (2021)

Surface and Structural Characterization of PVTMS Films Treated by Elemental Fluorine in Liquid Perfluorodecalin; Materials; Vol. 16, iss. 3
Published: (2023)

Structure, phase composition and mechanical properties in bioinert zirconium-based alloy after severe plastic deformation; Письма о материалах; Т. 7, № 4 (28)
Published: (2017)

Hydrophobic–Hydrophilic Properties and Characterization of PIM-1 Films Treated by Elemental Fluorine in Liquid Perfluorodecalin; Polymers; Vol. 14, iss. 23
Published: (2022)

Prediction of water droplet behavior on aluminum alloy surfaces modified by nanosecond laser pulses; Surface and Coatings Technology; Vol. 399
Published: (2020)

Evaluation of Physicomechanical Properties of Ti-45Nb Specimens Obtained by Selective Laser Melting; Key Engineering Materials; Vol. 743 : High Technology: Research and Applications (HTRA 2016)
by: Kovalevskaya Zh. G. Zhanna Gennadievna
Published: (2017)

Оценка упруго-прочностных свойств цементно-эпоксидных систем; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 334, № 1
by: Блинов П. А. Павел Александрович
Published: (2023)

Определение геомеханических свойств юрских и доюрских отложений Томской области; Известия вузов. Горный журнал; № 1
Published: (2022)

Influence of roughness on polar and dispersed components of surface free energy and wettability properties of copper and steel surfaces; Surface and Coatings Technology; Vol. 422
Published: (2021)

Влияние способа приготовления смесей пиролизной жидкости с углем на характеристики ее зажигания и горения; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 335, № 2
by: Слюсарский К. В. Константин Витальевич
Published: (2024)

Conditions for and Characteristics of the Dispersion of Gel Fuel Droplets during Ignition; Applied Sciences; Vol. 13, iss. 2
Published: (2023)

Immobilization of hydroxyapatite on polyetherketoneketone surfaces for improved cell adhesion; Materials Letters; Vol. 362
Published: (2024)

Low-temperature argon and ammonia plasma treatment of poly-3-hydroxybutyrate films: Surface topography and chemistry changes affect fibroblast cells in vitro; European Polymer Journal; Vol. 112
Published: (2019)

Pool boiling on the aluminum alloy, copper and WC-coated copper with micro-finned textures and developed multimodal roughness formed by nanosecond laser radiation; Experimental Thermal and Fluid Science; Vol. 162
Published: (2025)

Temperature self-regulating flat electric heaters based on MWCNTs-modified polymers; Polymer Bulletin; Vol. XX
Published: (2020)

Dynamics of water droplet impact on a textured heated and tilted surface; International Communications in Heat and Mass Transfer; Vol. 159, pt. C
Published: (2024)

Polymer Brushes on Graphitic Carbon Nitride for Patterning and as a SERS Active Sensing Layer via Incorporated Nanoparticles; ACS Applied Materials and Interfaces; Vol. 12, iss. 8
Published: (2020)

A new approach to mechanical brittleness index modeling based on conventional well logs using hybrid algorithms; Earth Science Informatics; Vol. 16
Published: (2023)

Aluminum coating performance enhancement: novel coating and characterization techniques; Перспективы развития фундаментальных наук; Т. 1 : Физика
by: Salman A. M.
Published: (2024)

Optimization of fluorine obtaining processing; Bulletin of the Tomsk Polytechnic University; Vol. 311, № 3
by: Liventsova N. V. Nina Vladimirovna
Published: (2007)

A novel data-driven model for real-time prediction of static Young's modulus applying mud-logging data; Earth Science Informatics; Vol. 17
Published: (2024)

Optimal Material Selection for Polymer-Polymer Prosthetic Implants by Tribological Criteria; Journal of Friction and Wear; Vol. 43, iss. 1
Published: (2022)

Antibacterial double-layer calcium phosphate/chitosan composite coating on metal implants for tissue engineering; Colloids and Surfaces A: Physicochemical and Engineering Aspects; Vol. 705, pt. 2
Published: (2025)

New Ti–35Nb–7Zr–5Ta Alloy Manufacturing by Electron Beam Melting for Medical Application Followed by High Current Pulsed Electron Beam Treatment; Metals; Vol. 11, iss. 7
Published: (2021)

Thermodynamics and Kinetics Research of the Fluorination Process of the Concentrate Rutile; Metals; Vol. 12, iss. 1
Published: (2022)

Smart, Piezo-Responsive Polyvinylidenefluoride/Polymethylmethacrylate Surface with Triggerable Water/Oil Wettability and Adhesion; ACS Applied Materials & Interfaces; Vol. 10, iss. 43
Published: (2018)

Research of acidity of the surface of powders and properties of thin films of Та2О5 - La2O3 system, obtained by sol-gel method; Bulletin of the Tomsk Polytechnic University; Vol. 309, № 4
Published: (2006)

Hybrid CFRP/SWCNT Composites with Enhanced Electrical Conductivity and Mechanical Properties; Journal of Materials Engineering and Performance; Vol. 27, iss. 11
by: Burkov M. V. Mikhail Vladimirovich
Published: (2018)

Critical phenomena in particle dissolution in the melt during electron-beam surfacing; Journal of Applied Mechanics and Technical Physics; Vol. 48, iss. 1
by: Kryukova O. N. Olga Nikolaevna
Published: (2007)

Electrophysical Properties of Thermally Conductive Polymer Materials; Russian Physics Journal; Vol. 57, iss. 10
Published: (2015)

Aluminium oxide particles-containing organogels for cleaning of optical glass surfaces; Journal of Metals, Materials and Minerals; Vol. 35, iss. 4
by: Lyamina G. V. Galina Vladimirovna
Published: (2025)

Thermophysical and Dielectric Properties of Polymer Composites Filled with Hexagonal Boron Nitride; Russian Physics Journal; Vol. 65, iss. 1
by: Lebedev S. M. Sergey Mikhailovich
Published: (2022)

Fluorination of rutile, electrochemical reduction of titanium fluoride to titanium, and its separation from the electrolyte salts melt; Journal of Chemical Technology and Metallurgy; Vol. 55, № 5
Published: (2020)

A first method for preparation of biodegradable fibrous scaffolds containing iodine on the fibre surfaces; Bulletin of Materials Science; Vol. 41
Published: (2018)

Formation of nano-sized structural-phase states in surface layers of a cermet alloy and the influence of the states on the tool life of cermet plates in metal cutting; Applied Mechanics and Materials; Vol. 770 : Urgent Problems of Up-to-Date Mechanical Engineering
Published: (2015)

Optical model for numerical study of a wavy surface; Mechanical Engineering, Automation and Control Systems (MEACS)
by: Shefer O. V. Olga Vladimirovna
Published: (2014)

Формирование методологического подхода исследования поверхностно-активных веществ для увеличения нефтеотдачи пластов (на примере месторождения Удмуртской Республики); Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 331, № 7
by: Наговицына Н. П. Наталья Петровна
Published: (2020)

Manufacture, structure and electrophysical properties of YSZ/SrTixZr1-xO3 solid solution; Ceramics International; Vol. 46, iss. 18, Pt. A
by: Sudzhanskaya I. V. Irina Vasiljevna
Published: (2020)

Use of copper phtalocyanine adsorption layer for substraction of spirits in gasochromatographic analysis; Bulletin of the Tomsk Polytechnic University; Vol. 309, № 4
by: Gavrilenko М. А.
Published: (2006)

Оценка влагопоглащающей способности железооксидных пигментов методом рН-метрии; Фундаментальные исследования; № 2, ч. 10
by: Иконникова К. В. Ксения Владимировна
Published: (2015)