Microstructure investigation of Ti-26Nb alloy manufactured from elemental powders by electron beam melting
| Источник: | Journal of Physics: Conference Series Vol. 1347 : New Materials and Technologies.— 2019.— [012126, 5 p.] |
|---|---|
| Автор-организация: | |
| Другие авторы: | , , , |
| Примечания: | Title screen Alloys which are planned to be used for implants fabrication must possess excellent biocompatibility, high strength, and low Young's modulus. A low elastic modulus, close to that of the cortical bone could significantly reduce the stress-shielding phenomenon usually occurring after surgery. Beta-titanium alloys such as Ti-Nb are good candidates for this purpose. Nb is known as a biocompatible metal used for titanium β-phase stabilization. Previous investigations indicate that the increase of Nb content results in the increase of β phase amount but the decrease of β grain size. In this study, we were aiming at the investigation of the microstructural properties of a titanium alloy manufactured by electron beam melting from the elemental powders mixture of Ti and Nb with 26 at.% of Nb. The influence of operating parameters on the efficacy of dissolving Nb particles in Ti was studied. The results obtained by SEM analysis demonstrated that electron beam energy has a significant effect on the homogeneity of the manufactured specimens. To obtain homogeneous and porosity-free specimens high energy level is required. The microstructure of these specimens was characterized. |
| Язык: | английский |
| Опубликовано: |
2019
|
| Предметы: | |
| Online-ссылка: | https://doi.org/10.1088/1742-6596/1347/1/012126 |
| Формат: | Электронный ресурс Статья |
| Запись в KOHA: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=662534 |
| Примечания: | Title screen Alloys which are planned to be used for implants fabrication must possess excellent biocompatibility, high strength, and low Young's modulus. A low elastic modulus, close to that of the cortical bone could significantly reduce the stress-shielding phenomenon usually occurring after surgery. Beta-titanium alloys such as Ti-Nb are good candidates for this purpose. Nb is known as a biocompatible metal used for titanium β-phase stabilization. Previous investigations indicate that the increase of Nb content results in the increase of β phase amount but the decrease of β grain size. In this study, we were aiming at the investigation of the microstructural properties of a titanium alloy manufactured by electron beam melting from the elemental powders mixture of Ti and Nb with 26 at.% of Nb. The influence of operating parameters on the efficacy of dissolving Nb particles in Ti was studied. The results obtained by SEM analysis demonstrated that electron beam energy has a significant effect on the homogeneity of the manufactured specimens. To obtain homogeneous and porosity-free specimens high energy level is required. The microstructure of these specimens was characterized. |
|---|---|
| DOI: | 10.1088/1742-6596/1347/1/012126 |