Change in the Phase Composition and Lattice Parameters of the Solid Solution Based on a-Ti in the Surface Layers of the Ti–6Al–4V Alloy Subjected to Electron-Beam Treatment
| Parent link: | Physics of Metals and Metallography Vol. 121, iss. 2.— 2020.— [P. 143-149] |
|---|---|
| Autor principal: | |
| Autor corporatiu: | |
| Altres autors: | , |
| Sumari: | Title screen The microstructure, phase composition, and lattice parameters of the α-Ti- based solid solution in the Ti-6Al-4V alloy treated by pulsed and continuous electron beams with the energy density of 18-24 and 450 J/cm2, respectively, have been investigated using the methods of X-ray diffraction analysis and transmission and scanning electron microscopy. In the initial state, the two-phase (α + β) alloy had a polycrystalline structure with the equiaxed α-phase grains and β-phase grains located at the junctions or along the boundaries of the α-phase grains. After the electron-beam treatment, α' martensite with a lamellar structure is formed in the molten surface layer, which then experiences an α' → α + α'' + β phase transformation. In the α phase, the lamellar structure inherited from the α' martensite is retained; the β phase is located along the boundaries of lamellar grains of the α phase; the α'' phase is located both in the β phase and inside the lamellar grains of the α phase. It has been revealed that the greater the total volume fraction of the β and α'' phases, the greater the lattice parameters of α-Ti and their axial ratio c/a, and the less the total mean-square displacements of atoms in the 101 direction in the α-Ti phase. The decrease in the total mean-square displacements in the α-Ti phase is due to the diffusion of the vanadium atoms into the β phase. With an increase in the energy density of the electron beam and with a decrease in the rate of cooling of the molten layer, the total volume fraction of the β and α'' phases increases and reaches 6%. Режим доступа: по договору с организацией-держателем ресурса |
| Publicat: |
2020
|
| Matèries: | |
| Accés en línia: | https://doi.org/10.1134/S0031918X20020143 |
| Format: | Electrònic Capítol de llibre |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=662464 |
| Sumari: | Title screen The microstructure, phase composition, and lattice parameters of the α-Ti- based solid solution in the Ti-6Al-4V alloy treated by pulsed and continuous electron beams with the energy density of 18-24 and 450 J/cm2, respectively, have been investigated using the methods of X-ray diffraction analysis and transmission and scanning electron microscopy. In the initial state, the two-phase (α + β) alloy had a polycrystalline structure with the equiaxed α-phase grains and β-phase grains located at the junctions or along the boundaries of the α-phase grains. After the electron-beam treatment, α' martensite with a lamellar structure is formed in the molten surface layer, which then experiences an α' → α + α'' + β phase transformation. In the α phase, the lamellar structure inherited from the α' martensite is retained; the β phase is located along the boundaries of lamellar grains of the α phase; the α'' phase is located both in the β phase and inside the lamellar grains of the α phase. It has been revealed that the greater the total volume fraction of the β and α'' phases, the greater the lattice parameters of α-Ti and their axial ratio c/a, and the less the total mean-square displacements of atoms in the 101 direction in the α-Ti phase. The decrease in the total mean-square displacements in the α-Ti phase is due to the diffusion of the vanadium atoms into the β phase. With an increase in the energy density of the electron beam and with a decrease in the rate of cooling of the molten layer, the total volume fraction of the β and α'' phases increases and reaches 6%. Режим доступа: по договору с организацией-держателем ресурса |
|---|---|
| DOI: | 10.1134/S0031918X20020143 |