Studies of kinetic plasticity effect in high-speed steels under Martensite transformation; Solid State Phenomena; Vol. 303

Studies of kinetic plasticity effect in high-speed steels under Martensite transformation; Solid State Phenomena; Vol. 303

Bibliographic Details
Parent link:	Solid State Phenomena Vol. 303.— 2020.— [P. 8-14]
Main Author:	Demenkova L. G. Larisa Gennadievna
Corporate Author:	Национальный исследовательский Томский политехнический университет Юргинский технологический институт
Other Authors:	Solodsky S. A. Sergey Anatolievich, Ilyashchenko D. P. Dmitry Pavlovich
Summary:	Title screen In the paper the authors study how the kinetic plasticity effects the temporary and residual stresses formed in instrumental steels when cooling. They also present the results of temporary stresses relaxation. This phenomenon was applied within the temperature range of the martensite transformation to reduce the cold cracking of the surfaced metal. The paper shows that the superplasticity effect emerging at the moment of martensite transformation plays the crucial role in temporary stresses relaxation. Режим доступа: по договору с организацией-держателем ресурса
Language:	English
Published:	2020
Subjects:	электронный ресурс труды учёных ТПУ cold cracking martensite transformation plasticity effect steel растрескивание мартенситные превращения пластичность сталь
Online Access:	https://doi.org/10.4028/www.scientific.net/SSP.303.8
Format:	Electronic Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=662421

Similar Items

Changes in the Structural-Phase State and Dislocation Density of Ti49.8Ni50.2 Alloy Depending on the Isochronal Annealing Temperature after Severe Plastic Deformation by abc Pressing at 573 K; Physical Mesomechanics; Vol. 27, iss. 2
Published: (2024)

Structure and Deformation Properties of Austenitic Stainless Steel; Physics of Metals and Metallography; Vol. 121, iss. 1
Published: (2020)

Strain Hardening of Bainitic and Martensitic Steel in Compression; Steel in Translation; Vol. 48, iss. 10
Published: (2018)

The Effect of Hydrogen on Martensite Transformations and the State of Hydrogen Atoms in Binary TiNi-Based Alloy with Different Grain Sizes; Materials; Vol. 12 iss. 23
Published: (2019)

Кристаллогеометрия структур в системах Ti-Ni, Ti-Fe и Ti-Ni-Fe; Фундаментальные проблемы современного материаловедения; Т. 6, № 4
Published: (2009)

Использование эффекта сверхэластичности при разработке внутрисосудистых медицинских имплантатов из сплавов на основе никелида титана; Известия Томского политехнического университета [Известия ТПУ]; Т. 325, № 3 : Химия и химические технологии
Published: (2014)

Recycling of Plastic Waste: How the Conditions of Thermal Cracking and the Composition of Plastic Mixtures Affect Product Yield; Recycling; Vol. 11, iss. 2
Published: (2026)

Production of Workpieces from Martensitic Stainless Steel Using Electron-Beam Surfacing and Investigation of Cutting Forces When Milling Workpieces; Materials; Vol. 16, iss. 13
Published: (2023)

Influence of Surface Sputtering during High-Intensity, Hot Ion Implantation on Deep Alloying of Martensitic Stainless Steel; Metals; Vol. 13 - iss. 9
Published: (2023)

Hydrogen diffusion and the effect of hydrogen on structural transformations in binary TiNi based alloys; International Journal of Hydrogen Energy; Vol. 44, iss. 55
Published: (2019)

Разрушение нитроцементованной стали; Известия Томского политехнического университета [Известия ТПУ]; Т. 323, № 2 : Математика и механика. Физика
by: Апасов А. М. Александр Михайлович
Published: (2013)

Effect of hydrogen redistribution during aging on the structure and phase state of nanocrystalline and coarse-grained TiNi alloys; Journal of Alloys and Compounds; Vol. 751
Published: (2018)

Reduction of the residual stresses in cold expanded thick-walled cylinders by plastic compression; Defence Technology; Vol. 12, iss. 6
Published: (2016)

The effect of phase transformations on the recovery of pulsed electron beam irradiated Ti-6Al-4V titanium alloy during scratching; Journal of Alloys and Compounds; Vol. 795
Published: (2019)

Modification of the microstructure and properties of martensitic steel during ultra-high dose high-intensity implantation of nitrogen ions; Surface and Coatings Technology; Vol. 388
Published: (2020)

Investigation of the Operational Durability of High Pressure Metal Hoses Made of Austenitic Steels; Solid State Phenomena; Vol. 328
Published: (2022)

The Effect of the Electronic Subsystem on the Deformation and Stress Localization in the Surface Layer of Solids; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
by: Khon Yu. A. Yury
Published: (2016)

Микроструктура и механические свойства спеченных образцов жаропрочной 12%-й хромистой ферритно-мартенситной стали; Перспективы развития фундаментальных наук; Т. 1 : Физика
by: Тимошов И. С.
Published: (2025)

Проблемы коррозии и физико-механические модели разрушения конструкционных материалов для энергомашиностроения; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 330, № 11
Published: (2019)

Plastics
by: Романова Л. Г.
Published: (Оренбург, ОГПУ, 2017)

Исследование тонкой структуры элементов кабеля технических сверхпроводников на основе сплава Nb-Ti при многоступенчатом волочении; Известия Томского политехнического университета [Известия ТПУ]; Т. 323, № 2 : Математика и механика. Физика
Published: (2013)

Effect of helical rolling on the bainitic microstructure and impact toughness of the low-carbon microalloyed steel; Materials Science and Engineering: A; Vol. 816
Published: (2021)

On possible reasons for defects in large blanks of low-carbon manganese steel at "YURMASH"; Bulletin of the Tomsk Polytechnic University; Vol. 310, № 3
by: Apasov А. М.
Published: (2007)

Cracking of Heavy Hydrocarbon Feedstocks in the Presence of Cobalt; Catalysis in Industry; Vol. 10, iss. 3
Published: (2018)

The morphology of the deformation relief and the grain boundary role in the bicrystals of AISI 316 steel; Solid State Sciences; Vol. 99
by: Alferova (Alfyorova) E. A. Ekaterina Aleksandrovna
Published: (2020)

Эмпирический метод распознавания группы стресс-коррозионных трещин в металле по сигналу накладного вихретокового преобразователя; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 333, № 11
by: Загидулин Р. В. Ринат Васикович
Published: (2022)

Translation-Rotation Plastic Flow in Polycrystals under Creep; Physical Mesomechanics; Vol. 21, iss. 5
by: Egorushkin V. E. Valery Efimovich
Published: (2018)

Modification of the Structure of Low-Carbon Pipe Steel by Helical Rolling, and the Increase in Its Strength and Cold Resistance; Physics of Metals and Metallography; Vol. 119, iss. 1
Published: (2018)

Estimation of A516-70 Carbon Steel Fatigue Damage on the Basis of Acoustic Nonlinearity; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Published: (2017)

Chernov–Lьders bands and the Portevin–Le Chatelier effect as plastic flow instabilities; Russian Metallurgy (Metally); Vol. 2017, iss. 4
by: Zuev L. B. Lev Borisovich
Published: (2017)

Nickel-cobalt sulfide catalysts synthesized in situ from bimetallic precursors dissolved in acetone for the heavy oil upgrading; Journal of Analytical and Applied Pyrolysis; Vol. 193
Published: (2026)

The Effect of Nanoscale Mesoscopic Structural States Associated with Lattice Curvature on the Mechanical Behavior of Ti–6Al–4V Alloy; Physical Mesomechanics; Vol. 23, iss. 6
Published: (2020)

The device for generating cold plasma in an electrically conductive solution, with the aim of tissue spare; Micro/Nanotechnologies and Electron Devices (EDM)
Published: (2016)

Structure and Properties of CrN/TiN Multi-Layer Coatings Obtained by Vacuum-Arc Plasma-Assisted Deposition Method; Coatings; Vol. 13, iss. 2
Published: (2023)

Technique of definition of cracking resistance characteristics of metal plates and envelopes of small thickness; Bulletin of the Tomsk Polytechnic University; Vol. 309, № 4
by: Solyanik A. S.
Published: (2006)

Investigation the impact of a laser on the chernov-luders lines in the 40X9C2 steel; Metalurgija; Vol. 57, No. 1-2
Published: (2018)

Theoretical and technological basics of the friction Units’ resource increasing; Solid State Phenomena; Vol. 303
Published: (2020)

Effect of Ultrasonic Impact Treatment on Structural Phase Transformations in Ti-6Al-4V Titanium Alloy; Physical Mesomechanics; Vol. 25, iss. 3
Published: (2022)

Speckle Pattern of the Surface Layer of Titanium Alloy GRADE 2 and Steel 3723HR Samples under Deformation; Materials Science Forum; Vol. 938 : Materials and Technologies in Mechanical Engineering
Published: (2018)

Structure and properties of welding joints of 1370 aluminum alloy obtained by electron-beam welding; Russian Physics Journal; Vol. 68, iss. 2
by: Solov’ev V. V. Vasily Vladimirovich
Published: (2025)