Robocasting of reaction bonded silicon carbide structures; Journal of the European Ceramic Society; Vol. 39, iss. 15

Robocasting of reaction bonded silicon carbide structures; Journal of the European Ceramic Society; Vol. 39, iss. 15

書目詳細資料
Parent link:	Journal of the European Ceramic Society Vol. 39, iss. 15.— 2019.— [P. 4520-4526]
企業作者:	Национальный исследовательский Томский политехнический университет Инженерная школа новых производственных технологий Отделение материаловедения
其他作者:	Wahl L. Larissa, Lorenz M. Mylena, Biggemann J. Jonas, Travitsky (Travitzky) N. Nakhum
總結:	Title screen A novel shaping method for the fabrication of reaction bonded silicon carbide structures was investigated in this work. A paste consisting of silicon carbide as inert filler and carbon powder was developed and printed by robocasting technology. Layer by layer deposition of the ceramic paste facilitates the printing of complex shaped structures. Different structures such as lattices, hollow cylinders, bending bars and gyroids were printed using nozzles with diameter of 0.5 mm and 1.5 mm. After pyrolysis at 700 °C and further heat treatment at 1850 °C the samples were infiltrated using the liquid silicon infiltration technique to obtain dense near-net shape RBSC structures. The robocasted structures showed a hardness of approximately 20 GPa, a thermal conductivity of ∼112 W/m*K, Young's modulus of ∼356 GPa, flexural strength of ∼224 MPa and an amount of residual silicon of approximately 23%. These measured properties are comparable with those of traditionally fabricated RBSC. Режим доступа: по договору с организацией-держателем ресурса
語言:	英语
出版:	2019
主題:	электронный ресурс труды учёных ТПУ additive manufacturing robocasting reaction bonded silicon carbide liquid silicon infiltration near-net shaping производство добавки карбид кремния инфильтрация
在線閱讀:	https://doi.org/10.1016/j.jeurceramsoc.2019.06.049
格式:	電子 Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=662336

相似書籍

Laminated Object Manufacturing of in-situ synthesized MAX-phase composites; Ceramics International; Vol. 43, iss. 12
出版: (2017)

Synthesis and Properties of Silicon-Carbide-Modified Porous Glass Composite; Glass and Ceramics; Vol. 77, iss. 3-4
由: Semenova V. I. Valeriya Igorevna
出版: (2020)

Influence of platelet content on the fabrication of colloidal gels for robocasting: Experimental analysis and numerical simulation; Journal of the European Ceramic Society; Vol. 40, iss. 3
出版: (2020)

Silicon carbide obtaining with DC arc-discharge plasma: synthesis, product characterization and purification; Materials Chemistry and Physics; Vol. 271
出版: (2021)

Al2O3/Cu-O composites fabricated by pressureless infiltration of paper-derived Al2O3 porous preforms; Ceramics International; Vol. 44, iss. 17
出版: (2018)

Advanced Arc Plasma Synthesis of Biomorphic Silicon Carbide Using Charcoal and Silicon Dioxide in Air; Waste and Biomass Valorization; Vol. 13, iss. 1
出版: (2021)

Tribological properties of silicon carbide ceramic surfaces modified by polishing, grinding and laser radiation; Discover Applied Sciences; Vol. 7, iss. 1
出版: (2025)

On the Possibility of Synthesis of Silicon Carbide Using an Indirect-Action Plasma Gun; Journal of Engineering Physics and Thermophysics; Vol. 97, iss. 2
出版: (2024)

Agricultural waste derived silicon carbide composite nanopowders as efficient coelectrocatalysts for water splitting; Journal of Cleaner Production; Vol. 442
出版: (2024)

Effect of Al and Ta Impurities on Si Adsorption on (001) and (111) Surfaces of B1-TiN; Crystals; Vol. 15, iss. 1
出版: (2025)

Obtaining Silicon-Carbide-Based Ceramics from Ash and Slag Wastes; Technical Physics Letters; Vol. 46, iss. 7
由: Pak A. Ya. Aleksandr Yakovlevich
出版: (2020)

Synthesis of silicon carbide using an AC atmospheric-pressure arc reactor; Journal of Alloys and Compounds; Vol. 1003
出版: (2024)

Physical, Mechanical, and Electrophysical Properties of Porous Glass Composite with Silicon Carbide Additives; Glass and Ceramics; Vol. 78, iss. 3-4
出版: (2021)

Optimization of plasma dynamic synthesis of ultradispersed silicon carbide and obtaining SPS ceramics on its basis; International Journal of Refractory Metals and Hard Materials; Vol. 79
出版: (2019)

Sintered silicon carbide composites deposited on zirconium alloy substrates in air and Ar atmosphere – Part II: Evaluation on micro-indentation properties; Materials Letters; Vol. 308, Pt. B
出版: (2022)

Electroarc Synthesis and Cleaning from Carbon Impurities of Cubic Silicon Carbide in the Air Atmosphere; Journal of Superhard Materials; Vol. 40, iss. 3
出版: (2018)

Sintered Silicon Carbide composites deposited on zirconium alloy substrates in air and Ar atmosphere – Part I: Evaluation of scratch adhesion and tribology properties; Materials Letters; Vol. 306
出版: (2022)

The influence of ion irradiation on the properties of ceramic silicon carbide; Energy Fluxes and Radiation Effects (EFRE-2016)
出版: (2016)

Porous SiC ceramic obtained by spark plasma sintering of preceramic paper: Microstructure, mechanical properties and gas permeability; Ceramics International; Vol. 50, iss. 8
出版: (2024)

Dependence of the Product's Phase Composition on the Ratio of Precursors in Plasmadynamic Synthesis of Silicon Carbide; Key Engineering Materials; Vol. 769 : High Technology: Research and Applications (HTRA 2017)
由: Sivkov A. A. Aleksandr Anatolyevich
出版: (2018)

Сравнительный анализ особенностей формирования состава плазмы при магнетронном распылении карбида кремния с использованием охлаждаемой и горячей мишеней; Перспективы развития фундаментальных наук; Т. 1 : Физика
由: Фишер М. Э.
出版: (2025)

Glass waste derived silicon carbide synthesis via direct current atmospheric arc plasma; Waste Management; Vol. 144
出版: (2022)

Physical and biological properties of silicon nanopowders obtained by the chemicothermal method; Nanotechnologies in Russia; Vol. 8, iss. 1-2
出版: (2013)

Определение условий, режимов и параметров послойного лазерного плавления композитного порошка алюминий-кремний-магний для получения образцов; Инновационные технологии в машиностроении
由: Сапрыкина Н. А. Наталья Анатольевна
出版: (2023)

Влияние стратегии сканирования на свойства образцов, полученных из сплава AlSiMg методом селективного лазерного плавления; Инновационные технологии в машиностроении
由: Сапрыкина Н. А. Наталья Анатольевна
出版: (2025)

Advanced Design Concepts for Shape-Memory Polymers in Biomedical Applications and Soft Robotics; Polymers; Vol. 18, iss. 2
由: Fetisova A. A. Anastasiya Alekseevna
出版: (2026)

Robocasting of reaction bonded silicon carbide/silicon carbide platelet composites; Ceramics International; Vol. 47, iss. 7
出版: (2021)

3D-Printed Poly(lactic acid)/Poly(ethylene glycol) Scaffolds with Shape-Memory Effect near Physiological Temperature; Polymers; Vol. 18, iss. 1
出版: (2026)

Features of adsorption of silicon on TiN(111) compound in presence of substitution impurities Al and Ta: first principle calculations; Перспективы развития фундаментальных наук; Т. 1 : Физика
由: Ognev S. O. Sergey Olegovich
出版: (2024)

Efficient Nonorthogonal Multiple Access: Cooperative Use of Distributed Space-Time Block Coding; IEEE Vehicular Technology Magazine; Vol. 13, iss. 4
出版: (2018)

Structural Mechanics Calculations of SiC/Mo-Re Composites with Improved High Temperature Creep Properties; Materials; Vol. 18, iss. 15
出版: (2025)

Microstructural Analysis of Novel Preceramic Paper-Derived SiCf/SiC Composites; Materials; Vol. 14, iss. 22
出版: (2021)

Obtaining a Material Based on Я-SiC and Carbon Fibers Using an Electric Arc Technique; Inorganic Materials: Applied Research; Vol. 10, iss. 4
出版: (2019)

Fabrication of Ti3SiC2-based pastes for screen printing on paper-derived Al2O3 substrates; Ceramics International; Vol. 44, iss. 7
出版: (2018)

Microstructure and Phase Composition of Porous SiC-Ceramic Obtained by Spark Plasma Sintering of Preceramic Paper; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 17
由: Sedanova E. P. Elizaveta Pavlovna
出版: (2023)

The research of uranium monoxide-oxide dissolution process in nitric acid; Bulletin of the Tomsk Polytechnic University; Vol. 311, № 3
出版: (2007)

Heating copper and aluminium nanopowders in mixtures with aluminium and silicon oxides in air; Bulletin of the Tomsk Polytechnic University; Vol. 309, № 4
由: Amelkovich Yu. A. Yuliya Alexandrovna
出版: (2006)

Processing of Industrial Metallurgical Wastes as the Basis of Manufacturing Technology Welding Fluxes and Additives NIM1; Key Engineering Materials; Vol. 736 : Materials and their Application
出版: (2017)

The effect of ceramic surface structure modification method on the ignition and combustion behavior of non-metallized and metallized gel fuel particles exposed to conductive heating; Fuel; Vol. 330
出版: (2022)

Ash Waste Utilization via Direct Current Arc Plasma with Production of SiC and AlN; Waste and Biomass Valorization; Vol. 12, iss. 10
出版: (2021)