Phase formation during air annealing of Ti-Ni-Ti laminate; Surface and Coatings Technology; Vol. 388

Phase formation during air annealing of Ti-Ni-Ti laminate; Surface and Coatings Technology; Vol. 388

Dades bibliogràfiques
Parent link:	Surface and Coatings Technology Vol. 388.— 2020.— 125543, 10 p.
Altres autors:	Marchenko E. S. Ekaterina Sergeevna, Yasenchuk Yu. F. Yury Fedorovich, Baygonakova G. A. Gulsharat Amanboldynovna, Gyunter S. V. Sergey Viktorovich, Yuzhakov M. M. Mikhail Mikhaylovich, Zenkin S. P. Sergey Petrovich, Potekaev A. I. Aleksandr Ivanovich, Dubovikov K. M. Kirill Maksimovich
Sumari:	Title screen The gradient coating synthesized on a nickelide titanium sample by sputtering a three-layer Ti-Ni-Ti laminate and annealing in air at 950–1000 °? was studied by XRD, SEM, TEM, and AFM methods. The thickness of the sputtered laminate layers was chosen equal to 0.5–1.0 µm to study the composition, structure and sequence of formation of the crystalline phases of the gradient coating. This thickness was sufficient for SEM and TEM studies and admissible large for XRD studies of phase composition. SEM and TEM techniques were used to determine the depth and patterns of grains occurrence of titanium carbonitrides. TEM and XRD techniques revealed that reactive synthesis of the coating is followed by transformation of the external amorphous layer of deposited titanium into heterogeneous crystalline titanium oxides. Crystallization of the oxide phase causes an increase in the volume of the external layer and intergranular cracking of the surface. AFM method showed an island microrelief of the external titanium layer formed during synthesis. The reaction synthesis of a multilayer laminate allows obtaining multifunctional nano-structured multilayer coatings with high chemical, mechanical and tribological characteristics, which ensures bioinertness of the surface of titanium nickelide implants AM_Agreement
Idioma:	anglès
Publicat:	2020
Matèries:	электронный ресурс труды учёных ТПУ laminate gradient coating surface energy wettability synthesis biocompatibility градиентные покрытия поверхностная энергия смачиваемость синтез биосовместимость
Accés en línia:	https://doi.org/10.1016/j.surfcoat.2020.125543
Format:	Electrònic Capítol de llibre
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=662285

Ítems similars

Влияние параметров микродугового оксидирования на шероховатость и смачиваемость кальцийфосфатных покрытий; Известия вузов. Физика; Т. 57, № 10/3
per: Комарова Е. Г. Екатерина Геннадьевна
Publicat: (2014)

Zn- or Cu-containing CaP-Based Coatings Formed by Micro-Arc Oxidation on Titanium and Ti-40Nb Alloy: Part II-Wettability and Biological Performance; Materials; Vol. 13, iss. 19
Publicat: (2020)

Плазмохимическое модифицирование полимерных материалов, предназначенных для сердечно-сосудистой хирургии, с целью управления степенью смачиваемости; Известия Томского политехнического университета [Известия ТПУ]; Т. 325, № 2 : Математика, физика и механика
per: Ходыревская Ю. И. Юлия Ивановна
Publicat: (2014)

Thin bioactive Zn-substituted hydroxyapatite coating deposited on Ti substrate by radiofrequency sputtering; High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes; Vol. 21, iss. 3
Publicat: (2018)

Combined Porous-Monolithic TiNi Materials Surface-Modified with Electron Beam for New-Generation Rib Endoprostheses; Journal of Functional Biomaterials; Vol. 14, iss. 5
Publicat: (2023)

Evaluation of surface modification techniques on the ability of apatite formation and corrosion behavior in synthetic body fluid: An in vitro study; Surfaces and Interfaces; Vol. 22
Publicat: (2021)

Electrodeposited Hydroxyapatite-Based Biocoatings: Recent Progress and Future Challenges; Coatings; Vol. 11, iss. 1
Publicat: (2021)

Spark plasma sintering of Nb/Ti3Al(Si)C2-TiC laminated composites; Materialia; Vol. 27
Publicat: (2023)

Effect of ultrasonic power applied to micro-arc oxidation on the morphology, chemistry, wettability and electrical properties of calcium phosphate coatings on titanium; Journal of Alloys and Compounds; Vol. 1039
Publicat: (2025)

RF magnetron-sputtered coatings deposited from biphasic calcium phosphate targets for biomedical implant applications; Bioactive Materials; Vol. 2, iss. 3
Publicat: (2017)

Smart, Piezo-Responsive Polyvinylidenefluoride/Polymethylmethacrylate Surface with Triggerable Water/Oil Wettability and Adhesion; ACS Applied Materials & Interfaces; Vol. 10, iss. 43
Publicat: (2018)

Формирование и исследование плазменного градиентного покрытия с верхним слоем оксида гафния; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 329, № 10
Publicat: (2018)

Improvement of the Surface Properties of Polyether Ether Ketone via Arc Evaporation for Biomedical Applications; Materials; Vol. 16 iss. 8
Publicat: (2023)

Surface modification of additive manufactured Ti6Al4V alloy with Ag nanoparticles: wettability and surface morphology study; IOP Conference Series: Materials Science and Engineering; Vol. 116 : Advanced Materials and New Technologies in Modern Materials Science
Publicat: (2016)

Построение многоуровневых статистических моделей прогноза значений смачиваемости по Восточно-Ламбейшорскому и Ярейюскому месторождениям; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 334, № 5
Publicat: (2023)

Characterization of electron beam deposited Nb2O5 coatings for biomedical applications; Journal of the Mechanical Behavior of Biomedical Materials; Vol. 103
Publicat: (2020)

Применение микрофлюидных чипов для изучения закономерностей формирования смачиваемости пород коллекторов нефти и возможности ее изменения при помощи наножидкостей; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 337, № 1
per: Батыршин К. Э. Карим Эдуардович
Publicat: (2026)

Thin Bioactive Zn Substituted Hydroxyapatite Coating Deposited on Ultrafine-Grained Titanium Substrate: Structure Analysis; Frontiers in Materials; Vol. 5
Publicat: (2018)

Surface Investigation of Physella Acuta Snail Shell Particle Reinforced Aluminium Matrix Composites; Journal of Functional Biomaterials; Vol. 13, iss. 4
Publicat: (2022)

Improved mechanical and thermal properties of quasi-ductile metal-ceramic laminated composites produced from Ta foils and Ti3Al(Si)C2 filled preceramic paper; Ceramics International; Vol. 51, iss. 23
Publicat: (2025)

Microstructure Formation and Mechanical Properties of Metastable Titanium-Based Gradient Coating Fabricated via Intense Pulse Ion Beam Melt Mixing; Materials; Vol. 16, iss. 8
Publicat: (2023)

Functionalizing Diatomite-Based Micro-Arc Coatings for Orthopedic Implants: Influence of TiO2 Addition; Biomimetics; Vol. 8, iss. 3
Publicat: (2023)

Biocompatible nanostructured coatings based on calcium phosphates prepared by means of rf-magnetron sputtering deposition; The 7th International Forum on Strategic Technology (IFOST-2012), September 18-21, 2012, Tomsk
Publicat: (2012)

Deposition of cellulose acetate coatings on titanium substrates by electrospraying for biomedical applications; Surface and Coatings Technology; Vol. 494, pt. 2
Publicat: (2024)

High-speed impact of water droplets on microtextured surfaces: Effect of roughness and wettability on corona splashing; Experimental Thermal and Fluid Science; Vol. 171
Publicat: (2026)

SiC- and Ag-SiC-Doped Hydroxyapatite Coatings Grown Using Magnetron Sputtering on Ti Alloy for Biomedical Application; Coatings; Vol. 12, iss. 2
Publicat: (2022)

Characterization and Determination of the Biocompatibility of Porous Polytetrafluoroethylene Membranes Fabricated via Electrospinning; Journal of Fluorine Chemistry; Vol. 246
Publicat: (2021)

Plasma modification of 3-D biodegradable scaffolds to improve surface wettability; Energy Fluxes and Radiation Effects (EFRE-2016)
Publicat: (2016)

Biocompatibility of Porous SHS-TiNi; Materials Science Forum; Vol. 970 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance II
Publicat: (2019)

Nitrogen-Doped Titanium Dioxide Thin Films Formation on the Surface of PLLA Electrospun Microfibers Scaffold by Reactive Magnetron Sputtering Method; Plasma Chemistry and Plasma Processing; Vol. 39, iss. 2
Publicat: (2019)

A review of plasma-assisted methods for calcium phosphate-based coatings fabrication; Surface and Coatings Technology; Vol. 206, iss. 8-9
per: Surmenev R. A. Roman Anatolievich
Publicat: (2012)

Effect of Plasma-Based Chemical Modification on Wettability of Polymer Materials for Cardiovascular Surgery; Advanced Materials Research; Vol. 1085 : Prospects of Fundamental Sciences Development (PFSD-2014)
Publicat: (2015)

Сравнительный анализ структурно-фазового состояния и механических свойств композитов Nb/Ti₃Al(Si)C₂-TiC-Al₂O₃, полученных искровым плазменным спеканием и горячим прессованием; Перспективы развития фундаментальных наук; Т. 2 : Химия
per: Абдульменова А. В.
Publicat: (2025)

Comparative study of monolithic, bilayer and gradient CVD diamond coatings under dry sliding against alumina; Ceramics International; Vol. 51, iss. 29, pt. B
Publicat: (2025)

Особенности проведения лабораторных исследований негидрофильных пород-коллекторов; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 332, № 4
Publicat: (2021)

Enhanced piezoelectric response of hybrid biodegradable 3D poly(3-hydroxybutyrate) scaffolds coated with hydrothermally deposited ZnO for biomedical applications; European Polymer Journal; Vol. 117
Publicat: (2019)

Dual Mode Chip Enantioselective Express Discrimination of Chiral Amines via Wettability-Based Mobile Application and Portable Surface-Enhanced Raman Spectroscopy Measurements; ACS Sensors; Vol. 4, No. 4
Publicat: (2019)

The Application of Radio Frequency Magnetron Sputtering for Fluoropolymer Surface Modification; Advanced Materials Research; Vol. 1040 : High Technology: Research and Applications 2014 (HTRA 2014)
per: Malchikhina A. I. Alena Igorevna
Publicat: (2014)

Surface Treatments and Residual Stress: Assessing the Implications for Biocompatibility in Titanium Implants; Russian Physics Journal; Vol. 66, iss. 1
per: Prosolov K. A. Konstantin Aleksandrovich
Publicat: (2023)

On the Application of Oxynitride Thin Films in Biomedicine; Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 1 supplement
Publicat: (2024)