Production of Black Carbon by Steam Pyrolysis (Thermolysis) Method of Rubber Waste in the Form of Worn-out Automobile Tires; AIP Conference Proceedings; Vol. 2212 : Thermophysical Basis of Energy Technologies (TBET 2019)

Production of Black Carbon by Steam Pyrolysis (Thermolysis) Method of Rubber Waste in the Form of Worn-out Automobile Tires; AIP Conference Proceedings; Vol. 2212 : Thermophysical Basis of Energy Technologies (TBET 2019)

Λεπτομέρειες βιβλιογραφικής εγγραφής
Parent link:AIP Conference Proceedings
Vol. 2212 : Thermophysical Basis of Energy Technologies (TBET 2019).— 2020.— [020023, 3 p.]
Συγγραφή απο Οργανισμό/Αρχή: Национальный исследовательский Томский политехнический университет Инженерная школа энергетики Научно-образовательный центр И. Н. Бутакова (НОЦ И. Н. Бутакова)
Άλλοι συγγραφείς: Kaltaev A. Albert, Larionov K. B. Kirill Borisovich, Yankovsky S. A. Stanislav Aleksandrovich, Slyusarsky K. V. Konstantin Vitalievich, Gubin V. E. Vladimir Evgenievich
Περίληψη:Title screen
An experimental research of the process of thermolysis of rubber waste at a steam temperature of 500° C was conducted. The characteristics of the obtained ash residue (carbon) in an amount of 33.8 wt.% partially meet the requirements of ISO 1867-75.6. and are comparable with the grade of carbon black P324. These characteristics include the specific surface (80 m{2}/g) and the pH of the liquid suspension (7.84). At the same time, high value of the ash residue (18.44 wt.%) and sulfur (over 2 wt.%) was recorded in the obtained material. Elemental analysis of the ash showed a high content of Zn (56%) and Si (11%).
Режим доступа: по договору с организацией-держателем ресурса
Γλώσσα:Αγγλικά
Έκδοση: 2020
Θέματα:
электронный ресурс
труды учёных ТПУ
черный углерод
пиролиз
термолиз
резиновые отходы
автомобильные шины
золы
Διαθέσιμο Online:https://doi.org/10.1063/5.0000970
Μορφή: Ηλεκτρονική πηγή Κεφάλαιο βιβλίου
KOHA link:https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=662177
Περιγραφή
Περίληψη:Title screen
An experimental research of the process of thermolysis of rubber waste at a steam temperature of 500° C was conducted. The characteristics of the obtained ash residue (carbon) in an amount of 33.8 wt.% partially meet the requirements of ISO 1867-75.6. and are comparable with the grade of carbon black P324. These characteristics include the specific surface (80 m{2}/g) and the pH of the liquid suspension (7.84). At the same time, high value of the ash residue (18.44 wt.%) and sulfur (over 2 wt.%) was recorded in the obtained material. Elemental analysis of the ash showed a high content of Zn (56%) and Si (11%).
Режим доступа: по договору с организацией-держателем ресурса
DOI:10.1063/5.0000970

Παρόμοια τεκμήρια