$Effect of Spark Plasma Sintering Temperature on the Properties of Transparent YSZ Ceramics; Refractories and Industrial Ceramics; Vol. 60, iss. 2$

Effect of Spark Plasma Sintering Temperature on the Properties of Transparent YSZ Ceramics; Refractories and Industrial Ceramics; Vol. 60, iss. 2

Détails bibliographiques
Parent link:	Refractories and Industrial Ceramics Vol. 60, iss. 2.— 2019.— [P. 154-159]
Autres auteurs:	Dvilis E. S. Edgar Sergeevich, Paygin V. D. Vladimir Denisovich, Stepanov S. A. Sergey Aleksandrovich, Khasanov O. L. Oleg Leonidovich, Valiev D. T. Damir Talgatovich, Polisadova E. F. Elena Fyodorovna, Vaganov V. A. Vitalii Andreevich, Alishin T. R. Timofey Ruslanovich, Dudina D. V. Dina Vladimirovna
Résumé:	Title screen A transparent submicron-grain sized cubic yttria-stabilized ZrO2 ceramics was obtained by spark plasma sintering in the temperature range from 1200 to 1400°C at a relatively low pre-pressing pressure (100 MPa). The produced ceramic samples have demonstrated high light transmission in the visible and near-infrared spectral regions. The paper presents elastoplastic properties and microstructure of the ceramics and discusses the relationship between the optical and elastoplastic characteristics, as well as microstructure. Режим доступа: по договору с организацией-держателем ресурса
Langue:	anglais
Publié:	2019
Sujets:	электронный ресурс труды учёных ТПУ yttria-stabilized zirconia transparent ceramics spark plasma sintering optical properties mechanical properties диоксид циркония прозрачная керамика плазменное спекание оптические свойства механические свойства
Accès en ligne:	https://doi.org/10.1007/s11148-019-00327-9
Format:	Électronique Chapitre de livre
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=662153

Documents similaires

Effect of technological parameters on optical and mechanical properties of Spark Plasma Sintered transparent YSZ ceramics; Ceramics International; Vol. 47, iss. 8
Publié: (2021)

Application of collector pressing method to manufacture various optically transparent oxide ceramics using SPS technique; Optical Materials; Vol. 128
Publié: (2022)

Manufacturing Optically Transparent Thick Zirconia Ceramics by Spark Plasma Sintering with the Use of Collector Pressing; Applied Sciences; Vol. 11, iss. 3
Publié: (2021)

Luminescence performance of yttrium-stabilized zirconia ceramics doped with Eu3+ ions fabricated by Spark Plasma Sintering technique; Ceramics International; Vol. 47, iss. 5
Publié: (2021)

Effect of Tb4O7 content on the optical and mechanical properties of transparent ceramics based on MgAl2O4; Materials Today: Proceedings; Vol. 19, Pt. 5 : International Conference on Modern Trends in Manufacturing Technologies and Equipment 2019
Publié: (2019)

The Effect of Thermal Annealing on Mechanical and Optical Properties of MgAl2O4 Ceramics Fabricated by Spark Plasma Sintering; Russian Physics Journal; Vol. 67, No. 4
Publié: (2024)

Transparent Ceramics Fabricated via Spark Plasma Sintering–Magnesium Aluminate Spinel with Increased Aspect Ratio; Reviews and Advances in Chemistry; Vol. 14, iss. 3
Publié: (2024)

Manufacturing of Transparent MgAl2O4 Ceramics by Spark Plasma Sintering Combined with Collector Pressing Method; Bulletin of the Russian Academy of Sciences: Physics; Vol. 89, iss. 9
Publié: (2025)

Luminescent ceramic materials based on laser-synthesized europium-stabilized zirconia nanopowders; Ceramics International; Vol. 52, iss. 29, pt. B
Publié: (2025)

Enhancing luminescent performance in spark plasma sintered YSZ/YAG multilayer ceramics through ultrasound processing; Ceramics International; Vol. 51, iss. 16, Pt. 1
Publié: (2025)

The role of MgF2 in the development of spark plasma sintered transparent MgAl2O4 ceramics; Ceramics International; Vol. 52, iss. 6
Publié: (2026)

Sintering and characterization of novel multilayered MgAl2O4/YAG, MgAl2O4/YSZ and YAG/YSZ ceramic-ceramic architectures for photonic applications; Ceramics International; Vol. 49 - iss. 21
Publié: (2023)

Tunable yellow and orange emission of Ce, Eu doped multilayered YSZ/YAG ceramics; Ceramics International; Vol. 50, iss. 12
Publié: (2024)

LiF influence on spark plasma sintering and structure of transparent MgAl2O4 ceramics; Russian Physics Journal; Vol. 68, iss. 4
Publié: (2025)

The particle size effect of CeO2 on the structure and properties of MgAl2O4 spinel ceramics; Ceramics International; Vol. 51, iss. 1
Publié: (2025)

Defects formation in YSZ ceramics with different Y2O3 content irradiated with 0.25 MeV electrons energy; Radiation Physics and Chemistry; Vol. 189
Publié: (2021)

Transparent Magnesium Aluminate Spinel Ceramics Reinforced by Alumina Nanofibers; Russian Physics Journal; Vol. 67, iss. 9
Publié: (2024)

Preceramic paper derived Ti3AlC2 – TiC – Al2O3 composites obtained via spark plasma sintering; Materials Letters; Vol. 409
Publié: (2026)

Porous SiC ceramic obtained by spark plasma sintering of preceramic paper: Microstructure, mechanical properties and gas permeability; Ceramics International; Vol. 50, iss. 8
Publié: (2024)

Structural and Spectroscopic Characterization of Tb3+-Doped MgAl2O4 Spinel Ceramics Fabricated by Spark Plasma Sintering Technique; Physica Status Solidi (B); Vol. 257, iss. 8
Publié: (2020)

Synthesis and optical properties of Tb3+ or Dy3+-doped MgAl2O4 transparent ceramics; Optical Materials; Vol. 91
Publié: (2019)

Fabrication and properties of novel multilayered Y3Al5O12/MgAl2O4 ceramics doped with rare-earth ions; Ceramics International; Vol. 50, iss. 11
Publié: (2024)

Spark plasma sintering of highly magnetic Fe3O4 and CoFe2O4 ceramics from hollow spheres synthesized by thermal plasma spraying; Materials Characterization; Vol. 230, Pt. A
Publié: (2025)

Spark plasma sintering of Al2O3-filled preceramic paper for membrane supports; Materials Letters; Vol. 383
Publié: (2025)

Исследование структуры теплозащитных плазменных покрытий с использованием спектрометрии ядерного обратного рассеяния; Известия Томского политехнического университета [Известия ТПУ]; Т. 324, № 2 : Математика и механика. Физика
Publié: (2014)

Preceramic paper-derived Ti3Al(Si)C2-based composites obtained by spark plasma sintering; Ceramics International; Vol. 47, iss. 9
Publié: (2021)

Spark plasma sintering of ceramics based on silicon nitride and titanium nitride; 11th International Forum on Strategic Technology (IFOST 2016); Pt. 1
Publié: (2016)

Optimization of plasma dynamic synthesis of ultradispersed silicon carbide and obtaining SPS ceramics on its basis; International Journal of Refractory Metals and Hard Materials; Vol. 79
Publié: (2019)

Influence of Temperature on the Luminescence Properties of MgAl2O4:Dy3+ Ceramics Synthesized by Spark Plasma Sintering; Physics of the Solid State; Vol. 61, iss. 10
Publié: (2019)

Применение комплексного критерия для оценки качества армированной прозрачной керамики MgAl2O4; Перспективы развития фундаментальных наук; Т. 2 : Химия
par: Шевченко И. Н. Иван Николаевич
Publié: (2025)

Studies on the thermal stability of nanosized powder of WC1-x-based product prepared by plasma dynamic method, compaction feasibility of the powder and preparation of composite with aluminium; Ceramics International; Vol. 47, iss. 5
Publié: (2021)

Preceramic Paper-Derived SiCf/SiCp Composites Obtained by Spark Plasma Sintering: Processing, Microstructure and Mechanical Properties; Materials; Vol. 13 iss. 3
Publié: (2020)

Microstructure and Phase Composition of Porous SiC-Ceramic Obtained by Spark Plasma Sintering of Preceramic Paper; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 17
par: Sedanova E. P. Elizaveta Pavlovna
Publié: (2023)

Preceramic paper-derived SiCf/Ti3Al(Si)C2 and SiCf/Ti3SiC2 MAX-phase based laminates fabricated using spark plasma sintering; Scripta Materialia; Vol. 194
Publié: (2021)

Oxidation behavior and physico-mechanical properties of spark plasma sintered ZrCN-ZrO2 ceramics; Ceramics International; Vol. 51, iss. 28, pt. A
par: Kuzmenko E. D. Egor Dmitrievich
Publié: (2025)

Synthesis of TiZrNbHfTaC5 High-Entropy Carbide Powder: Sintering and Radiation Resistance Research; Russian Physics Journal; Vol. 67, No. 5
Publié: (2024)

Физико-механические свойства керамики на основе ZrN-ZrO2, полученной методом искрового плазменного спекания; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 335, № 7
Publié: (2024)

Effect of additives on sintering of zirconia ceramics; Journal of Thermal Analysis and Calorimetry; Vol. 134, iss. 1
par: Gyngazov (Ghyngazov) S. A. Sergey Anatolievich
Publié: (2018)

Structural and Luminescent Peculiarities of Spark PlasmaSintered Transparent MgAl2O4 Spinel Ceramics Doped withCerium Ions; Inorganics; Vol. 10, iss. 10
Publié: (2022)

Optical and luminescent properties of MgAl2O4 ceramics doped with high level of Eu3+ ions concentrations; Optics and Spectroscopy; Vol. 141 - iss. 5
Publié: (2023)