Preceramic Paper-Derived SiCf/SiCp Composites Obtained by Spark Plasma Sintering: Processing, Microstructure and Mechanical Properties; Materials; Vol. 13 iss. 3

Preceramic Paper-Derived SiCf/SiCp Composites Obtained by Spark Plasma Sintering: Processing, Microstructure and Mechanical Properties; Materials; Vol. 13 iss. 3

Λεπτομέρειες βιβλιογραφικής εγγραφής
Parent link:	Materials Vol. 13 iss. 3.— 2020.— [607, 14 p.]
Συλλογικό Έργο:	Национальный исследовательский Томский политехнический университет Инженерная школа новых производственных технологий Отделение материаловедения, Национальный исследовательский Томский политехнический университет Инженерная школа ядерных технологий Отделение экспериментальной физики
Άλλοι συγγραφείς:	Li Ke, Kashkarov E. B. Egor Borisovich, Syrtanov M. S. Maksim Sergeevich, Sedanova E. P. Elizaveta Pavlovna, Ivashutenko A. S. Alexander Sergeevich, Lider A. M. Andrey Markovich, Fan Ping, Yuan Daqing, Travitsky N. Nakhum
Περίληψη:	Title screen Ceramic matrix composites (CMCs) based on silicon carbide (SiC) are promising materials for applications as structural components used under high irradiation flux and high temperature conditions. The addition of SiC fibers (SiCf) may improve both the physical and mechanical properties of CMCs and lead to an increase in their tolerance to failure. This work describes the fabrication and characterization of novel preceramic paper-derived SiCf/SiCp composites fabricated by spark plasma sintering (SPS). The sintering temperature and pressure were 2100 °C and 20–60 MPa, respectively. The content of fibers in the composites was approx. 10 wt.%. The matrix densification and fiber distribution were examined by X-ray computed tomography and scanning electron microscopy. Short processing time avoided the destruction of SiC fibers during SPS. The flexural strength of the fabricated SiCf/SiCp composites at room temperature varies between 300 and 430 MPa depending on the processing parameters and microstructure of the fabricated composites. A quasi-ductile fracture behavior of the fabricated composites was observed.
Γλώσσα:	Αγγλικά
Έκδοση:	2020
Θέματα:	электронный ресурс труды учёных ТПУ ceramic matrix composites preceramic paper silicon carbide fibers spark plasma sintering small punch test X-ray computed tomography microstructure mechanical properties керамические композиты карбид кремния спекание компьютерная томография микроструктура
Διαθέσιμο Online:	http://earchive.tpu.ru/handle/11683/64957 https://doi.org/10.3390/ma13030607
Μορφή:	Ηλεκτρονική πηγή Κεφάλαιο βιβλίου
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=662131

Παρόμοια τεκμήρια

Porous SiC ceramic obtained by spark plasma sintering of preceramic paper: Microstructure, mechanical properties and gas permeability; Ceramics International; Vol. 50, iss. 8
Έκδοση: (2024)

Microstructure and Phase Composition of Porous SiC-Ceramic Obtained by Spark Plasma Sintering of Preceramic Paper; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 17
από: Sedanova E. P. Elizaveta Pavlovna
Έκδοση: (2023)

Fabrication of Paper-Derived Ti3SiC2-Based Materials by Spark Plasma Sintering; Advanced Engineering Materials; Vol. 22, iss. 6
Έκδοση: (2020)

Preceramic paper derived Ti3AlC2 – TiC – Al2O3 composites obtained via spark plasma sintering; Materials Letters; Vol. 409
Έκδοση: (2026)

Preceramic paper-derived Ti3Al(Si)C2-based composites obtained by spark plasma sintering; Ceramics International; Vol. 47, iss. 9
Έκδοση: (2021)

Preceramic paper-derived SiCf/Ti3Al(Si)C2 and SiCf/Ti3SiC2 MAX-phase based laminates fabricated using spark plasma sintering; Scripta Materialia; Vol. 194
Έκδοση: (2021)

Spark plasma sintering of Nb/Ti3Al(Si)C2-TiC laminated composites; Materialia; Vol. 27
Έκδοση: (2023)

Влияние соотношения толщины керамического к металлическому слою на механические свойства ламинированных композитов на основе Ta/Ti3Al(Si)C2-TiC-Al2O3; Перспективы развития фундаментальных наук; Т. 1 : Физика
από: Ляхова А. А.
Έκδοση: (2025)

High Toughness Laminated Composites Fabricated from Ti3Al(Si)C2 Filled Preceramic Paper and Nb Foils: Formation Mechanism and Influence of Laminate Architecture; Advanced Engineering Materials; Vol. 26, iss. 13
Έκδοση: (2024)

Spark Plasma Sintering of Paper-Derived Ti3AlC2-Based Composites: Influence of Sintering Temperature; Materials Science Forum; Vol. 1016 : THERMEC’2020/2021
Έκδοση: (2021)

Microstructural Analysis of Novel Preceramic Paper-Derived SiCf/SiC Composites; Materials; Vol. 14, iss. 22
Έκδοση: (2021)

Получение объемных изделий из металломатричного композита Cu-SiC для энергоэффективных теплопроводящих систем; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 334, № 7
Έκδοση: (2023)

Functionally graded laminated composites fabricated from MAX-phase filled preceramic papers: Microstructure, mechanical properties and oxidation resistance; Journal of the European Ceramic Society; Vol. 42, iss. 5
Έκδοση: (2022)

Microstructure and Deformation Behavior of Novel Metal–Ceramic Laminated Composites Ta/Ti3Al(Si)C2–TiC; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18
Έκδοση: (2024)

Improved mechanical and thermal properties of quasi-ductile metal-ceramic laminated composites produced from Ta foils and Ti3Al(Si)C2 filled preceramic paper; Ceramics International; Vol. 51, iss. 23
Έκδοση: (2025)

Obtaining Silicon-Carbide-Based Ceramics from Ash and Slag Wastes; Technical Physics Letters; Vol. 46, iss. 7
από: Pak A. Ya. Aleksandr Yakovlevich
Έκδοση: (2020)

Optimization of plasma dynamic synthesis of ultradispersed silicon carbide and obtaining SPS ceramics on its basis; International Journal of Refractory Metals and Hard Materials; Vol. 79
Έκδοση: (2019)

Искровое плазменное спекание объемных материалов на основе SiC из углеродистого остатка термической переработки рисовой шелухи; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 335, № 4
Έκδοση: (2024)

Формирование композитов с алюминиевой матрицей, армированных наночастицами карбида вольфрама; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 335, № 3
Έκδοση: (2024)

Obtaining a Material Based on Я-SiC and Carbon Fibers Using an Electric Arc Technique; Inorganic Materials: Applied Research; Vol. 10, iss. 4
Έκδοση: (2019)

Spark plasma sintering of Al2O3-filled preceramic paper for membrane supports; Materials Letters; Vol. 383
Έκδοση: (2025)

Получение порошков меди и металломатричных композитов с медной матрицей в плазме дугового разряда; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 337, № 2
Έκδοση: (2026)

The densification process and microstructure of the B4C/ultra-high molecular weight polyethylene composites consolidated by spark plasma sintering; Ceramics International; Vol. 51, iss. 30
Έκδοση: (2025)

Spark plasma sintering of ceramics based on silicon nitride and titanium nitride; 11th International Forum on Strategic Technology (IFOST 2016); Pt. 1
Έκδοση: (2016)

Studying the Moulding Ways for the Metal Powdered Aluminum Reinforced with Carbon Fiber in the Spark Plasma Sintering Process; Key Engineering Materials; Vol. 769 : High Technology: Research and Applications (HTRA 2017)
Έκδοση: (2018)

Sintered silicon carbide composites deposited on zirconium alloy substrates in air and Ar atmosphere – Part II: Evaluation on micro-indentation properties; Materials Letters; Vol. 308, Pt. B
Έκδοση: (2022)

Synthesis of TiZrNbHfTaC5 High-Entropy Carbide Powder: Sintering and Radiation Resistance Research; Russian Physics Journal; Vol. 67, No. 5
Έκδοση: (2024)

Optimization of 3D Printing Parameters of High Viscosity PEEK/30GF Composites; Polymers; Vol. 16, iss. 18
Έκδοση: (2024)

Studies on the thermal stability of nanosized powder of WC1-x-based product prepared by plasma dynamic method, compaction feasibility of the powder and preparation of composite with aluminium; Ceramics International; Vol. 47, iss. 5
Έκδοση: (2021)

Paper-Derived Ferroelectric Ceramics: A Feasibility Study; Advanced Engineering Materials; Vol. 20, iss. 7
Έκδοση: (2018)

Irradiation resistance of preceramic paper-derived SiCf/SiC laminated composites; Journal of Materials Science; Vol. 57
Έκδοση: (2022)

Al2O3/Cu-O composites fabricated by pressureless infiltration of paper-derived Al2O3 porous preforms; Ceramics International; Vol. 44, iss. 17
Έκδοση: (2018)

Ti3SiC2 MAX-Phase-Based Composites Produced by Vacuum and Spark Plasma Sintering; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 19, iss. 5
Έκδοση: (2025)

LiF influence on spark plasma sintering and structure of transparent MgAl2O4 ceramics; Russian Physics Journal; Vol. 68, iss. 4
Έκδοση: (2025)

Structural Mechanics Calculations of SiC/Mo-Re Composites with Improved High Temperature Creep Properties; Materials; Vol. 18, iss. 15
Έκδοση: (2025)

Plasma Dynamic Synthesis of Dispersed Cu/SiC Composites with a Controlled Phase Composition; Metals and Materials International; Vol. 30, No. 3
Έκδοση: (2024)

Влияние добавки Ni на плотность и твердость керамики на основе W2B5, изготовленной методом электроимпульсного плазменного спекания; Перспективы развития фундаментальных наук; Т. 2 : Химия
από: Ху Чуаньнин
Έκδοση: (2025)

Сравнительный анализ структурно-фазового состояния и механических свойств композитов Nb/Ti₃Al(Si)C₂-TiC-Al₂O₃, полученных искровым плазменным спеканием и горячим прессованием; Перспективы развития фундаментальных наук; Т. 2 : Химия
από: Абдульменова А. В.
Έκδοση: (2025)

Oxidation behavior and physico-mechanical properties of spark plasma sintered ZrCN-ZrO2 ceramics; Ceramics International; Vol. 51, iss. 28, pt. A
από: Kuzmenko E. D. Egor Dmitrievich
Έκδοση: (2025)

Synthesis of MAX-Phase Ti3SiC2 by Combined Powder Metallurgy Technique; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 6
Έκδοση: (2024)