Nonwoven PTFE Membranes Fabricated by Electrospinning Method: Preparation and Characterization; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
| Parent link: | IOP Conference Series: Materials Science and Engineering Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019).— 2020.— [012021, 6 p.] |
|---|---|
| Awduron Corfforaethol: | , |
| Awduron Eraill: | , , , |
| Crynodeb: | Title screen Polytetrafluoroethylene (PTFE) is one of the promising materials for the purposes of tissue engineering and chemical technology because of its excellent physico-chemical properties and mechanical characteristics. However, conventional methods of PTFE porous membranes production have several disadvantages which limit the number of potential application areas by reason of a insufficient surface-to-volume ratio and poor porosity at small thickness. In the paper the results of using PTFE water suspension with a solution of water-soluble polymer for preparation of porous membranes by electrospinning are reported. The physico-chemical characteristics of membranes were investigated depending on the content of PTFE dispersion in spinning solution. There were found high hydrophobicity and lyophilicity of PTFE electrospun membranes. Main reasons of poor mechanical properties of porous membranes at high content of PTFE suspension in spinning solution are discovered. The ways of mechanical properties improvement and areas of possible applications are proposed. |
| Iaith: | Saesneg |
| Cyhoeddwyd: |
2020
|
| Pynciau: | |
| Mynediad Ar-lein: | http://dx.doi.org/10.1088/1757-899X/731/1/012021 http://earchive.tpu.ru/handle/11683/58048 |
| Fformat: | Electronig Pennod Llyfr |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=661945 |
Eitemau Tebyg
Preparation and characterization of porous PTFE membranes prepared by electrospinning method; Химия и химическая технология в XXI веке
gan: Kolesnik I. M.
Cyhoeddwyd: (2020)
gan: Kolesnik I. M.
Cyhoeddwyd: (2020)
Composition Polymeric Membranes Based on the VDF-TeFE Copolymer Formed by Electrospinning; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
gan: Tverdokhlebova T. S. Tamara Sergeevna
Cyhoeddwyd: (2020)
gan: Tverdokhlebova T. S. Tamara Sergeevna
Cyhoeddwyd: (2020)
Characterization and Determination of the Biocompatibility of Porous Polytetrafluoroethylene Membranes Fabricated via Electrospinning; Journal of Fluorine Chemistry; Vol. 246
Cyhoeddwyd: (2021)
Cyhoeddwyd: (2021)
Пористые мембраны из политетрафторэтилена, полученные методом электроформования с последующим спеканием; Перспективы развития фундаментальных наук; Т. 2 : Химия
gan: Колесник И. М.
Cyhoeddwyd: (2020)
gan: Колесник И. М.
Cyhoeddwyd: (2020)
Нетканные полимерные мембраны из политетрафторэтилена, сформированные методом электроформования: получение и свойства; Современные материалы и технологии новых поколений
gan: Колесник И. М.
Cyhoeddwyd: (2019)
gan: Колесник И. М.
Cyhoeddwyd: (2019)
Искусственные кровеносные сосуды на основе отечественных фторполимеров: Пилотное исследование; Химическая физика; Т. 44, № 11
Cyhoeddwyd: (2025)
Cyhoeddwyd: (2025)
Искусственный перикард на основе политетрафторэтилена изготовленный методом электроспиннинга: исследование местной реакции тканей при имплантации; Химия и химическая технология в XXI веке; Т. 2
Cyhoeddwyd: (2024)
Cyhoeddwyd: (2024)
Effect of the SR-containing hydroxyapatite nanoparticles doping on the polymer fiber morphology within the 3-D artificial scaffolds for bone tissue regeneration; Высокие технологии в современной науке и технике (ВТСНТ-2016)
Cyhoeddwyd: (2016)
Cyhoeddwyd: (2016)
Antibacterial PLGA and PCL membranes, modified by magnetron sputtering method of copper target; IOP Conference Series: Materials Science and Engineering; Vol. 1093 : Advanced Materials for Engineering and Functional Purposes (AMEFP 2020)
gan: Badaraev A. D. Arsalan Dorzhievich
Cyhoeddwyd: (2021)
gan: Badaraev A. D. Arsalan Dorzhievich
Cyhoeddwyd: (2021)
Влияние режима термической обработки и агрессивных сред на механические свойства мембран из политетрафторэтилена, изготовленных методом электроспиннинга; Перспективные материалы конструкционного и функционального назначения
Cyhoeddwyd: (2022)
Cyhoeddwyd: (2022)
Effect of heat treatments and aggressive media on mechanical properties of porous polytetrafluoroethylene membranes fabricated via electrospinning; Journal of Fluorine Chemistry; Vol. 264
Cyhoeddwyd: (2022)
Cyhoeddwyd: (2022)
Fabrication and characterization of polycaprolactone cross-linked and highly-aligned 3-D artificial scaffolds for bone tissue regeneration via electrospinning technology; IOP Conference Series: Materials Science and Engineering; Vol. 98 : Interdisciplinary Problems of Nanotechnology, Biomedicine and Nanotoxicology (Nanobiotech 2015)
gan: Gorodzha S. N. Svetlana Nikolaevna
Cyhoeddwyd: (2015)
gan: Gorodzha S. N. Svetlana Nikolaevna
Cyhoeddwyd: (2015)
Investigation of the 3-d polymer scaffolds with mineralized surface for tissue engineering via electrospinning technology; Перспективы развития фундаментальных наук; Т. 1 : Физика
gan: Chernozem R. V. Roman Viktorovich
Cyhoeddwyd: (2017)
gan: Chernozem R. V. Roman Viktorovich
Cyhoeddwyd: (2017)
Радиационное модифицирование матриксов из полимолочной кислоты; Физико-технические проблемы в науке, промышленности и медицине
gan: Кузнецов П. Г.
Cyhoeddwyd: (2016)
gan: Кузнецов П. Г.
Cyhoeddwyd: (2016)
Influence of Nano- and Microfillers on the Mechanical and Tribotechnical Properties of "UHMWPE-PTFE" Composites; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Cyhoeddwyd: (2016)
Cyhoeddwyd: (2016)
Исследование структуры и свойств полимерных мембран для сердечно сосудистой хирургии полученных методом электроспиннинга; Перспективные материалы конструкционного и функционального назначения
gan: Стребкова Е. Н.
Cyhoeddwyd: (2022)
gan: Стребкова Е. Н.
Cyhoeddwyd: (2022)
Composite Materials Obtained via Two-Nozzle Electrospinning from Polycarbonate and Vinylidene Fluoride/Tetrafluoroethylene Copolymer; Inorganic Materials: Applied Research; Vol. 9, iss. 2
Cyhoeddwyd: (2018)
Cyhoeddwyd: (2018)
Electrospinning vs. Electro-Assisted Solution Blow Spinning for Fabrication of Fibrous Scaffolds for Tissue Engineering; Polymers; Vol. 14, iss. 23
Cyhoeddwyd: (2023)
Cyhoeddwyd: (2023)
Screening of polymeric membranes for membrane assisted deacidification of sardine oil; Resource-Efficient Technologies; Vol. 2, Suppl. 1
Cyhoeddwyd: (2016)
Cyhoeddwyd: (2016)
PCL/chloramphenicol/hexafluoro-2-propanol solution for fabrication of various bioactive drug delivery materials; Перспективы развития фундаментальных наук; Т. 2 : Химия
gan: Volokhova A. A. Apollinariya Aleksandrovna
Cyhoeddwyd: (2021)
gan: Volokhova A. A. Apollinariya Aleksandrovna
Cyhoeddwyd: (2021)
Structure and Properties of SWCNT-Modified CFRP; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
gan: Burkov M. V. Mikhail Vladimirovich
Cyhoeddwyd: (2020)
gan: Burkov M. V. Mikhail Vladimirovich
Cyhoeddwyd: (2020)
Закономерности формирования, структурные особенности и свойства композитных скэффолдов на основе поликапролактона и модифицированного гидроксиапатита, сформированных методом электроформования: диссертация на соискание ученой степени кандидата технических наук; спец. 05.11.17; спец. 01.04.07
gan: Шкарина С. Н. Светлана Николаевна
Cyhoeddwyd: (Томск, 2018)
gan: Шкарина С. Н. Светлана Николаевна
Cyhoeddwyd: (Томск, 2018)
Закономерности формирования, структурные особенности и свойства композитных скэффолдов на основе поликапролактона и модифицированного гидроксиапатита, сформированных методом электроформования: автореферат диссертации на соискание ученой степени кандидата технических наук; спец. 05.11.17; спец. 01.04.07
gan: Шкарина С. Н. Светлана Николаевна
Cyhoeddwyd: (Томск, 2018)
gan: Шкарина С. Н. Светлана Николаевна
Cyhoeddwyd: (Томск, 2018)
Application of Laser Welding in Car Bodies Manufacturing; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
Cyhoeddwyd: (2020)
Cyhoeddwyd: (2020)
Simulation of UHMWPE Composites Filled with Preliminary Mechanically Activated PTFE Particles; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Cyhoeddwyd: (2018)
Cyhoeddwyd: (2018)
Investigation of the Structure and Properties of SWCNT-Modified Epoxy Specimens; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
gan: Burkov M. V. Mikhail Vladimirovich
Cyhoeddwyd: (2020)
gan: Burkov M. V. Mikhail Vladimirovich
Cyhoeddwyd: (2020)
Algorithm for J-Integral Measurements by Digital Image Correlation; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
Cyhoeddwyd: (2020)
Cyhoeddwyd: (2020)
Волокнистые материалы и пористые полимерные мембраны для медицины
gan: Куринова М. А. Мария Алексеевна
Cyhoeddwyd: (Германия, LAP Lambert Academic Publishing, 2015)
gan: Куринова М. А. Мария Алексеевна
Cyhoeddwyd: (Германия, LAP Lambert Academic Publishing, 2015)
The Hydrothermal Synthesis Duration Influence on Calcium Phosphate and Hydroxyapatite Phase Composition; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
Cyhoeddwyd: (2020)
Cyhoeddwyd: (2020)
Antibacterial Ferroelectric Hybrid Membranes Fabricated via Electrospinning for Wound Healing; Membranes; Vol. 11, iss. 12
Cyhoeddwyd: (2021)
Cyhoeddwyd: (2021)
The Effect of Plastic Deformation on the Geometric Parameters of Nb-Ti-Based Superconducting Cable; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
gan: Yntymakova A.
Cyhoeddwyd: (2020)
gan: Yntymakova A.
Cyhoeddwyd: (2020)
The pH Level Influence on Hydroxyapatite Phase Composition Synthesized with Hydrothermal Method; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
Cyhoeddwyd: (2020)
Cyhoeddwyd: (2020)
Uniaxial Stress and Electron Irradiation Effects on Nanochains Straightening in Film Polymer Materials; Key Engineering Materials; Vol. 769 : High Technology: Research and Applications (HTRA 2017)
Cyhoeddwyd: (2018)
Cyhoeddwyd: (2018)
Composite fluoropolymer piezoelectric membranes for reconstructive surgery; Journal of Physics: Conference Series; Vol. 1611 : Prospects of Fundamental Sciences Development (PFSD-2020)
Cyhoeddwyd: (2020)
Cyhoeddwyd: (2020)
Study of the Influence of Uniaxial Strain and Electron Irradiation on the Deformation of Polytetrafluoroethylene Film; Key Engineering Materials; Vol. 781 : Radiation-Thermal Effects and Processes in Inorganic Materials
Cyhoeddwyd: (2018)
Cyhoeddwyd: (2018)
Plastic and tribological properties of polytetrafluoroethylene (PTFE) under conditions of high pressure and shear; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
gan: Starcevic J. Jasminka
Cyhoeddwyd: (2014)
gan: Starcevic J. Jasminka
Cyhoeddwyd: (2014)
Nanostructuring of a Surface Layer as a Way to Improve the Mechanical Properties of Hypoeutectic Silumin; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
Cyhoeddwyd: (2020)
Cyhoeddwyd: (2020)
Review of Hybrid Materials Based on Polyhydroxyalkanoates for Tissue Engineering Applications; Polymers; Vol. 13, iss. 11
gan: Pryadko A. Artyom
Cyhoeddwyd: (2021)
gan: Pryadko A. Artyom
Cyhoeddwyd: (2021)
Enhanced properties of poly(ε‐caprolactone)/polyvinylpyrrolidone electrospun scaffolds fabricated using 1,1,1,3,3,3‐hexafluoro‐2‐propanol; Journal of Applied Polymer Science; Vol. 138, iss. 23
Cyhoeddwyd: (2021)
Cyhoeddwyd: (2021)
Исследование 3-Д скэффолдов на основе ПГБ-ГВ полимера с частицами Si-ГА; Перспективы развития фундаментальных наук; Т. 1 : Физика
gan: Звягин А. С. Андрей Сергеевич
Cyhoeddwyd: (2016)
gan: Звягин А. С. Андрей Сергеевич
Cyhoeddwyd: (2016)