Material Design Methodology for Optimized Wear-Resistant Thermoplastic–Matrix Composites Based on Polyetheretherketone and Polyphenylene Sulfide; Materials; Vol. 13 iss. 3
| Parent link: | Materials Vol. 13 iss. 3.— 2020.— [524, 22 p.] |
|---|---|
| Korporativní autor: | |
| Další autoři: | , , , , , , , |
| Shrnutí: | Title screen The main goal of this paper is to design and justify optimized compositions of thermoplastic–matrix wear-resistant composites based on polyetheretherketone (PEEK) and polyphenylene sulfide (PPS). Their mechanical and tribological properties have been specified in the form of bilateral and unilateral limits. For this purpose, a material design methodology has been developed. It has enabled to determine the optimal degrees of filling of the PEEK- and PPS-based composites with carbon microfibers and polytetrafluoroethylene particles. According to the results of tribological tests, the PEEK-based composites have been less damaged on the metal counterpart than the PPS-based samples having the same degree of filling. Most likely, this was due to more uniform permolecular structure and greater elasticity of the matrix. The described methodology is versatile and can be used to design various composites. Its implementation does not impose any limits on the specified properties of the material matrix or the reinforcing inclusions. The initial data on the operational characteristics can be obtained experimentally or numerically. The methodology enables to design the high-strength wear-resistant composites which are able to efficiently operate both in metal–polymer and ceramic–polymer friction units. |
| Jazyk: | angličtina |
| Vydáno: |
2020
|
| Témata: | |
| On-line přístup: | https://doi.org/10.3390/ma13030524 |
| Médium: | Elektronický zdroj Kapitola |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=661889 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 661889 | ||
| 005 | 20250418142556.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\32929 | ||
| 090 | |a 661889 | ||
| 100 | |a 20200317d2020 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 102 | |a CH | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Material Design Methodology for Optimized Wear-Resistant Thermoplastic–Matrix Composites Based on Polyetheretherketone and Polyphenylene Sulfide |f S. V. Panin, B. A. Lyukshin, S. A. Bochkareva [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 38 tit.] | ||
| 330 | |a The main goal of this paper is to design and justify optimized compositions of thermoplastic–matrix wear-resistant composites based on polyetheretherketone (PEEK) and polyphenylene sulfide (PPS). Their mechanical and tribological properties have been specified in the form of bilateral and unilateral limits. For this purpose, a material design methodology has been developed. It has enabled to determine the optimal degrees of filling of the PEEK- and PPS-based composites with carbon microfibers and polytetrafluoroethylene particles. According to the results of tribological tests, the PEEK-based composites have been less damaged on the metal counterpart than the PPS-based samples having the same degree of filling. Most likely, this was due to more uniform permolecular structure and greater elasticity of the matrix. The described methodology is versatile and can be used to design various composites. Its implementation does not impose any limits on the specified properties of the material matrix or the reinforcing inclusions. The initial data on the operational characteristics can be obtained experimentally or numerically. The methodology enables to design the high-strength wear-resistant composites which are able to efficiently operate both in metal–polymer and ceramic–polymer friction units. | ||
| 461 | |t Materials | ||
| 463 | |t Vol. 13 iss. 3 |v [524, 22 p.] |d 2020 | ||
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a polymer matrix composites | |
| 610 | 1 | |a chemical composition | |
| 610 | 1 | |a computer simulation | |
| 610 | 1 | |a physical experiment | |
| 610 | 1 | |a mechanical properties | |
| 610 | 1 | |a material design methodology | |
| 610 | 1 | |a композиты | |
| 610 | 1 | |a химический состав | |
| 610 | 1 | |a компьютерное моделирование | |
| 610 | 1 | |a физические эксперименты | |
| 610 | 1 | |a механические свойства | |
| 701 | 1 | |a Panin |b S. V. |c specialist in the field of material science |c Professor of Tomsk Polytechnic University, Doctor of technical sciences |f 1971- |g Sergey Viktorovich |3 (RuTPU)RU\TPU\pers\32910 |9 16758 | |
| 701 | 1 | |a Lyukshin |b B. A. |g Boris Aleksandrovich | |
| 701 | 1 | |a Bochkareva |b S. A. |g Svetlana Alekseevna | |
| 701 | 1 | |a Kornienko |b L. A. |g Lyudmila Aleksandrovna | |
| 701 | 0 | |a Nguyen Dyk An |c Vietnamese specialist in the field of materials science |c assistant of Tomsk Polytechnic University |f 1986- |3 (RuTPU)RU\TPU\pers\39934 | |
| 701 | 0 | |a Le Tkhi Mi Khiep | |
| 701 | 1 | |a Panov |b I. L. |g Iljya Leonidovich | |
| 701 | 1 | |a Grishaeva |b N. Yu. |g Nataljya Yurjevna | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа новых производственных технологий |b Отделение материаловедения |3 (RuTPU)RU\TPU\col\23508 |
| 801 | 2 | |a RU |b 63413507 |c 20200827 |g RCR | |
| 850 | |a 63413507 | ||
| 856 | 4 | |u https://doi.org/10.3390/ma13030524 | |
| 942 | |c CF | ||