Electron beam absorption in 3D-printed polymer samples with different infill densities; Journal of Physics: Conference Series; Vol. 1337 : Trans-Siberian School on High Energy Physics
| Parent link: | Journal of Physics: Conference Series Vol. 1337 : Trans-Siberian School on High Energy Physics.— 2019.— [012003, 6 p.] |
|---|---|
| Egile korporatiboa: | , |
| Beste egile batzuk: | , , , , , |
| Gaia: | Title screen In this work, we study the efficiency of electron absorption by the plastic samples produced using 3D printing with different infill densities. We investigate the influence of the print layer orientation relative to the electron beam axis on the radiation dose distribution. It is possible to produce plastic samples with different infill by fused deposition modelling. Ten polymer test samples with the infill density ranging from 10% to 100% are printed and studied experimentally using a 6 MeV electron beam of an MIB-6E betatron. GafChromic EBT3 films are used for the dose measurement. When the infill is above 70%, the difference of dose distribution uniformity cannot be distinguished for the two print layer orientations. Therefore, these samples can be used for electron beam formation. |
| Hizkuntza: | ingelesa |
| Argitaratua: |
2019
|
| Gaiak: | |
| Sarrera elektronikoa: | http://earchive.tpu.ru/handle/11683/65049 https://doi.org/10.1088/1742-6596/1337/1/012003 |
| Formatua: | MixedMaterials Baliabide elektronikoa Liburu kapitulua |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=661863 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 661863 | ||
| 005 | 20250812094449.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\32892 | ||
| 090 | |a 661863 | ||
| 100 | |a 20200316d2019 k||y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 102 | |a GB | ||
| 135 | |a arnn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Electron beam absorption in 3D-printed polymer samples with different infill densities |f A. A. Bulavskaya, I. B. Danilova, Yu. Dontsov (Doncov) [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 13 tit.] | ||
| 330 | |a In this work, we study the efficiency of electron absorption by the plastic samples produced using 3D printing with different infill densities. We investigate the influence of the print layer orientation relative to the electron beam axis on the radiation dose distribution. It is possible to produce plastic samples with different infill by fused deposition modelling. Ten polymer test samples with the infill density ranging from 10% to 100% are printed and studied experimentally using a 6 MeV electron beam of an MIB-6E betatron. GafChromic EBT3 films are used for the dose measurement. When the infill is above 70%, the difference of dose distribution uniformity cannot be distinguished for the two print layer orientations. Therefore, these samples can be used for electron beam formation. | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\3526 |t Journal of Physics: Conference Series | |
| 463 | |t Vol. 1337 : Trans-Siberian School on High Energy Physics |o II School, April 01-05, 2019,Tomsk, Russia |v [012003, 6 p.] |d 2019 | ||
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a электронные пучки | |
| 610 | 1 | |a полимеры | |
| 610 | 1 | |a 3D-печать | |
| 701 | 1 | |a Bulavskaya |b A. A. |c Specialist in the field of nuclear technologies |c Senior Lecturer of Tomsk Polytechnic University, Candidate of Physical and Mathematical Sciences |f 1993- |g Angelina Aleksandrovna |3 (RuTPU)RU\TPU\pers\45898 |9 22019 | |
| 701 | 1 | |a Danilova |b I. B. |g Irina Borisovna | |
| 701 | 1 | |a Dontsov (Doncov) |b Yu. |c Specialist in the field of material science |c Engineer of Tomsk Polytechnic University |f 1982- |g Yuriy Vladimirovich |3 (RuTPU)RU\TPU\pers\38298 | |
| 701 | 1 | |a Cherepennikov |b Yu. M. |c physicist |c Associate Professor of Tomsk Polytechnic University, Candidate of Sciences |f 1989- |g Yuriy Mihaylovich |3 (RuTPU)RU\TPU\pers\31561 |9 15721 | |
| 701 | 1 | |a Miloichikova |b I. A. |c physicist |c Associate Professor of Tomsk Polytechnic University, Candidate of Physical and Mathematical Sciences |f 1988- |g Irina Alekseevna |3 (RuTPU)RU\TPU\pers\35525 |9 18707 | |
| 701 | 1 | |a Stuchebrov |b S. G. |c physicist |c Associate Professor of Tomsk Polytechnic University, Candidate of Physical and Mathematical Sciences |f 1981- |g Sergey Gennadevich |3 (RuTPU)RU\TPU\pers\31559 |9 15719 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Исследовательская школа физики высокоэнергетических процессов |c (2017- ) |3 (RuTPU)RU\TPU\col\23551 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа ядерных технологий |b Отделение ядерно-топливного цикла |3 (RuTPU)RU\TPU\col\23554 |
| 801 | 1 | |a RU |b 63413507 |c 20140825 | |
| 801 | 2 | |a RU |b 63413507 |c 20210408 |g RCR | |
| 850 | |a 63413507 | ||
| 856 | 4 | 0 | |u http://earchive.tpu.ru/handle/11683/65049 |
| 856 | 4 | 0 | |u https://doi.org/10.1088/1742-6596/1337/1/012003 |
| 942 | |c CF | ||