Structure and Tribomechanical Properties of Multicomponent Extrudable "UHMWPE-HDPE-g-SMAPP" Composites Fabricated by Fused Deposition Modeling; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
| Parent link: | AIP Conference Proceedings Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19).— 2019.— [020264, 7 p.] |
|---|---|
| Enti autori: | , |
| Altri autori: | , , , , , |
| Riassunto: | Title screen A comparative analysis on the structure, mechanical and tribological properties of multicomponent polymer composites "UHMWPE+17 wt % HDPE-g-SMA+12 wt % PP" fabricated by fused deposition modeling (layer-bylayer extrusion printing) and hot pressing (compression sintering) was carried out. It is shown that extrudable UHMWPE based composites fabricated by 3D-printing over the set of key tribomechanical properties (wear resistance, friction coefficient, elastic modulus, yield point, tensile strength, elongation at break) exceeds those of the composites obtained by compression sintering (CS). The reason of the latter is associated with the formation of a more uniform ordered permolecular structure with increased degree of crystallinity. Multicomponent antifriction nanocomposites with the extrudable polymer-polymer matrix (filled with hydroxyapatite and carbon fibers) were fabricated and investigated. The results obtained make it possible to recommend the multicomponent UHMWPE-based nanocomposites for manufacturing complex shape products for tribotechnical applications by means of 3D-printing. Режим доступа: по договору с организацией-держателем ресурса |
| Lingua: | inglese |
| Pubblicazione: |
2019
|
| Soggetti: | |
| Accesso online: | https://doi.org/10.1063/1.5132131 |
| Natura: | MixedMaterials Elettronico Capitolo di libro |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=661525 |
MARC
| LEADER | 00000naa2a2200000 4500 | ||
|---|---|---|---|
| 001 | 661525 | ||
| 005 | 20260203142726.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\32148 | ||
| 035 | |a RU\TPU\network\32146 | ||
| 090 | |a 661525 | ||
| 100 | |a 20200110d2019 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Structure and Tribomechanical Properties of Multicomponent Extrudable "UHMWPE-HDPE-g-SMAPP" Composites Fabricated by Fused Deposition Modeling |f S. V. Panin [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 11 tit.] | ||
| 330 | |a A comparative analysis on the structure, mechanical and tribological properties of multicomponent polymer composites "UHMWPE+17 wt % HDPE-g-SMA+12 wt % PP" fabricated by fused deposition modeling (layer-bylayer extrusion printing) and hot pressing (compression sintering) was carried out. It is shown that extrudable UHMWPE based composites fabricated by 3D-printing over the set of key tribomechanical properties (wear resistance, friction coefficient, elastic modulus, yield point, tensile strength, elongation at break) exceeds those of the composites obtained by compression sintering (CS). The reason of the latter is associated with the formation of a more uniform ordered permolecular structure with increased degree of crystallinity. Multicomponent antifriction nanocomposites with the extrudable polymer-polymer matrix (filled with hydroxyapatite and carbon fibers) were fabricated and investigated. The results obtained make it possible to recommend the multicomponent UHMWPE-based nanocomposites for manufacturing complex shape products for tribotechnical applications by means of 3D-printing. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 1 | |0 (RuTPU)RU\TPU\network\4816 |t AIP Conference Proceedings | |
| 463 | 1 | |0 (RuTPU)RU\TPU\network\31884 |t Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19) |o Proceedings of the International Conference, 1–5 October 2019, Tomsk, Russia |f National Research Tomsk Polytechnic University (TPU) ; Institute of Strength Physics and Materials Science SB RAS (Russia) ; eds. V. E. Panin ; S. G. Psakhie ; V. M. Fomin |v [020264, 7 p.] |d 2019 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a структура | |
| 610 | 1 | |a трибомеханические свойства | |
| 610 | 1 | |a композиты | |
| 610 | 1 | |a наплавки | |
| 610 | 1 | |a горячее прессование | |
| 610 | 1 | |a 3D-печать | |
| 610 | 1 | |a нанокомпозиты | |
| 610 | 1 | |a СВМПЭ | |
| 701 | 1 | |a Panin |b S. V. |c specialist in the field of material science |c Professor of Tomsk Polytechnic University, Doctor of technical sciences |f 1971- |g Sergey Viktorovich |3 (RuTPU)RU\TPU\pers\32910 |9 16758 | |
| 701 | 1 | |a Buslovich |b D. |c specialist in material science |c assistant of Tomsk Polytechnic University |f 1993- |g Dmitry |3 (RuTPU)RU\TPU\pers\40084 | |
| 701 | 1 | |a Kornienko |b L. A. | |
| 701 | 1 | |a Dontsov |b Yu. |c Specialist in the field of material science |c Engineer of Tomsk Polytechnic University |f 1982- |g Yuriy Vladimirovich |3 (RuTPU)RU\TPU\pers\38298 | |
| 701 | 1 | |a Bochkareva |b S. A. | |
| 701 | 1 | |a Chaikina |b M. V. | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа новых производственных технологий |b Отделение материаловедения |3 (RuTPU)RU\TPU\col\23508 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Институт физики высоких технологий |b Кафедра материаловедения и технологии металлов |b Научно-образовательный центр "Современные производственные технологии" |3 (RuTPU)RU\TPU\col\22917 |
| 801 | 2 | |a RU |b 63413507 |c 20200110 |g RCR | |
| 856 | 4 | |u https://doi.org/10.1063/1.5132131 | |
| 942 | |c CF | ||