Static Fracture Behavior of Ultrasonic Impact Post-Built treated SLM-manufactured Ti-6Al-4V; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
| Parent link: | AIP Conference Proceedings Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19).— 2019.— [020041, 5 p.] |
|---|---|
| Autor corporatiu: | |
| Altres autors: | , , , |
| Sumari: | Title screen The paper deals with the investigation of ultrasonic impact post-build treatment of SLM-manufactured Ti-6Al4V. SLM blanks were cut along building direction and subjected to ultrasonic impact surface treatment. Post-build treated specimens were tested by uniaxial tensile testing with in situ strain monitoring via digital image correlation technique (DIC), while the fracture surfaces were studied by scanning electron microscopy (SEM). The analysis of the experimental data allowed revealing the effect of post-build treatment on mechanical properties and on the peculiarities of deformation behavior. Analysis of SEM images of fracture surfaces allowed us to distinguish the differences between structure influence onto failure pattern both for the treated and non-treated specimens. Режим доступа: по договору с организацией-держателем ресурса |
| Idioma: | anglès |
| Publicat: |
2019
|
| Matèries: | |
| Accés en línia: | https://doi.org/10.1063/1.5131908 |
| Format: | Electrònic Capítol de llibre |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=661472 |
MARC
| LEADER | 00000naa2a2200000 4500 | ||
|---|---|---|---|
| 001 | 661472 | ||
| 005 | 20260209140656.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\32068 | ||
| 035 | |a RU\TPU\network\32064 | ||
| 090 | |a 661472 | ||
| 100 | |a 20191226d2019 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Static Fracture Behavior of Ultrasonic Impact Post-Built treated SLM-manufactured Ti-6Al-4V |f M. V. Burkov [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 9 tit.] | ||
| 330 | |a The paper deals with the investigation of ultrasonic impact post-build treatment of SLM-manufactured Ti-6Al4V. SLM blanks were cut along building direction and subjected to ultrasonic impact surface treatment. Post-build treated specimens were tested by uniaxial tensile testing with in situ strain monitoring via digital image correlation technique (DIC), while the fracture surfaces were studied by scanning electron microscopy (SEM). The analysis of the experimental data allowed revealing the effect of post-build treatment on mechanical properties and on the peculiarities of deformation behavior. Analysis of SEM images of fracture surfaces allowed us to distinguish the differences between structure influence onto failure pattern both for the treated and non-treated specimens. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 1 | |0 (RuTPU)RU\TPU\network\4816 |t AIP Conference Proceedings | |
| 463 | 1 | |0 (RuTPU)RU\TPU\network\31884 |t Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19) |o Proceedings of the International Conference, 1–5 October 2019, Tomsk, Russia |f National Research Tomsk Polytechnic University (TPU) ; Institute of Strength Physics and Materials Science SB RAS (Russia) ; eds. V. E. Panin ; S. G. Psakhie ; V. M. Fomin |v [020041, 5 p.] |d 2019 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a статическое разрушение | |
| 610 | 1 | |a ультразвуковые воздействия | |
| 610 | 1 | |a поверхности | |
| 610 | 1 | |a деформации | |
| 610 | 1 | |a корреляция | |
| 610 | 1 | |a изображения | |
| 610 | 1 | |a сканирующая электронная микроскопия | |
| 610 | 1 | |a механические свойства | |
| 701 | 1 | |a Burkov |b M. V. |c specialist in the field of material science |c associate professor of Tomsk polytechnical university, Candidate of Technical Sciences |f 1987- |g Mikhail Vladimirovich |3 (RuTPU)RU\TPU\pers\32915 | |
| 701 | 1 | |a Eremin |b A. V. |c specialist in the field of material science |c Engineer of Tomsk Polytechnic University |f 1990- |g Alexandr Vyacheslavovich |3 (RuTPU)RU\TPU\pers\32912 | |
| 701 | 1 | |a Panin |b S. V. |c specialist in the field of material science |c Professor of Tomsk Polytechnic University, Doctor of technical sciences |f 1971- |g Sergey Viktorovich |3 (RuTPU)RU\TPU\pers\32910 |9 16758 | |
| 701 | 1 | |a Byakov |b A. V. |c specialist in the field of material science |c engineer of Tomsk polytechnical university, Candidate of Technical Sciences |f 1985- |g Anton Viktorovich |3 (RuTPU)RU\TPU\pers\35461 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа новых производственных технологий |b Отделение материаловедения |3 (RuTPU)RU\TPU\col\23508 |
| 801 | 2 | |a RU |b 63413507 |c 20191226 |g RCR | |
| 856 | 4 | |u https://doi.org/10.1063/1.5131908 | |
| 942 | |c CF | ||