Effect of pulse arc facing parameters with electrode wire pre-heating upon the beads formation; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
| Parent link: | AIP Conference Proceedings Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19).— 2019.— [020177, 7 p.] |
|---|---|
| Korporativní autor: | |
| Další autoři: | , , , , |
| Shrnutí: | Title screen This article presents the dependences of the duration and strength of the current pulse during pulsed arcwelding with preheating of the electrode wire. MIG-welding was applied to build-up samples produced from steel 20 inthe atmosphere of argon with ER 308 LSi wire. Preheater current was 19 and 22 A. The power and the duration of thepulse current were varied. Facing with pre-heating of the electrode wire with 19 A current allows 40% increase of thefusion coefficient of the electrode metal in comparison to the similar conditions without pre-heating. It allows to increasewire feed speed, reduce mixing with the base metal and improve the geometry of the built-up layer. Режим доступа: по договору с организацией-держателем ресурса |
| Jazyk: | angličtina |
| Vydáno: |
2019
|
| Témata: | |
| On-line přístup: | https://doi.org/10.1063/1.5132044 |
| Médium: | MixedMaterials Elektronický zdroj Kapitola |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=661423 |
MARC
| LEADER | 00000naa2a2200000 4500 | ||
|---|---|---|---|
| 001 | 661423 | ||
| 005 | 20260209144340.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\31881 | ||
| 035 | |a RU\TPU\network\30761 | ||
| 090 | |a 661423 | ||
| 100 | |a 20191213d2019 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 135 | |a drgn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Effect of pulse arc facing parameters with electrode wire pre-heating upon the beads formation |f M. A. Krampit [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 4 tit.] | ||
| 330 | |a This article presents the dependences of the duration and strength of the current pulse during pulsed arcwelding with preheating of the electrode wire. MIG-welding was applied to build-up samples produced from steel 20 inthe atmosphere of argon with ER 308 LSi wire. Preheater current was 19 and 22 A. The power and the duration of thepulse current were varied. Facing with pre-heating of the electrode wire with 19 A current allows 40% increase of thefusion coefficient of the electrode metal in comparison to the similar conditions without pre-heating. It allows to increasewire feed speed, reduce mixing with the base metal and improve the geometry of the built-up layer. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 1 | |0 (RuTPU)RU\TPU\network\4816 |t AIP Conference Proceedings | |
| 463 | 1 | |0 (RuTPU)RU\TPU\network\31884 |t Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19) |o Proceedings of the International Conference, 1–5 October 2019, Tomsk, Russia |f National Research Tomsk Polytechnic University (TPU) ; Institute of Strength Physics and Materials Science SB RAS (Russia) ; eds. V. E. Panin ; S. G. Psakhie ; V. M. Fomin |v [020177, 7 p.] |d 2019 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a импульсная дуга | |
| 610 | 1 | |a электродная проволока | |
| 701 | 1 | |a Krampit |b M. A. |c specialist in the field of welding production |c assistant of Yurga technological Institute of Tomsk Polytechnic University |f 1990- |g Maksim Andreevich |3 (RuTPU)RU\TPU\pers\34724 |9 18074 | |
| 701 | 1 | |a Kuznetsov |b M. A. |c specialist in the field of welding production |c Associate Professor of the Yurga Technological Institute (branch) of Tomsk Polytechnic University, Candidate of Technical Sciences |f 1985- |g Maksim Aleksandrovich |3 (RuTPU)RU\TPU\pers\34486 |9 17869 | |
| 701 | 1 | |a Danilov |b V. I. |c physicist |c Professor of Yurga technological Institute of Tomsk Polytechnic University, Doctor of physical and mathematical sciences |f 1947 |g Vladimir Ivanovich |3 (RuTPU)RU\TPU\pers\34726 |9 18076 | |
| 701 | 1 | |a Krampit |b A. G. |c specialist in the field of welding production |c Associate Professor of Yurga technological Institute of Tomsk Polytechnic University, candidate of technical sciences |f 1971- |g Andrey Garoldovich |3 (RuTPU)RU\TPU\pers\34725 |9 18075 | |
| 701 | 1 | |a Shlyakhova |b G. V. |g Galina Vitaljevna | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Юргинский технологический институт |c (2009- ) |3 (RuTPU)RU\TPU\col\15903 |
| 801 | 2 | |a RU |b 63413507 |c 20191213 |g RCR | |
| 856 | 4 | |u https://doi.org/10.1063/1.5132044 | |
| 942 | |c CF | ||