Stress-Strain State in a Buckled Thermal Barrier Coating on an Elastic Substrate; Physical Mesomechanics; Vol. 21, iss. 6

Stress-Strain State in a Buckled Thermal Barrier Coating on an Elastic Substrate; Physical Mesomechanics; Vol. 21, iss. 6

Detaylı Bibliyografya
Parent link:	Physical Mesomechanics Vol. 21, iss. 6.— 2018.— [P. 498-507]
Müşterek Yazar:	Национальный исследовательский Томский политехнический университет (ТПУ) Инженерная школа новых производственных технологий (ИШНПТ) Отделение материаловедения (ОМ)
Diğer Yazarlar:	Lyukshin P. A. Petr Aleksandrovich, Lyukshin B. A. Boris Aleksandrovich, Matolygina N. Yu. Nataljya Yurjevna, Panin S. V. Sergey Viktorovich
Özet:	Title screen The paper analyzes the stress-strain state of a thermal barrier coating buckled on an elastic substrate under thermal shock. For the analysis, the stability loss of an orthotropic plate on an elastic substrate (Winkler foundation) is modeled using the Euler method on the assumption that compressive stresses arise in the plate as it expands on heating while the substrate remains cold and dimensionally stable. The deflection amplitude and stresses in the heated plate are determined, and the stress-strain state in the substrate is estimated by solving a plane elastic problem with displacement boundary conditions. The data suggest that both compressive and tensile stresses arise at the coating-substrate interface since the coating becomes unstable and that extrusion and intrusion zones appear in the substrate, showing their chessboard distribution in the plane strain case. Режим доступа: по договору с организацией-держателем ресурса
Dil:	İngilizce
Baskı/Yayın Bilgisi:	2018
Konular:	труды учёных ТПУ электронный ресурс thermal barrier coatings stability loss thermal shock термобарьерные покрытия потери устойчивость тепловые удары
Online Erişim:	https://doi.org/10.1134/S1029959918060048
Materyal Türü:	Elektronik Kitap Bölümü
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=661422

Benzer Materyaller

Structural Phase State and Thermal Cyclic Stability of the Thermal Barrier Zr–Si–O Coatings Deposited on a Copper Substrate by the Microplasma Method; Protection of Metals and Physical Chemistry of Surfaces; Vol. 55, iss. 4
Baskı/Yayın Bilgisi: (2019)

Исследование структуры теплозащитных плазменных покрытий с использованием спектрометрии ядерного обратного рассеяния; Известия Томского политехнического университета [Известия ТПУ]; Т. 324, № 2 : Математика и механика. Физика
Baskı/Yayın Bilgisi: (2014)

Влияние анизотропии на напряженно-деформированное состояние и потерю устойчивости керамического защитного покрытия при тепловом ударе; Физическая мезомеханика; Т. 18, № 3
Baskı/Yayın Bilgisi: (2015)

Thermal stability of a-C:H:SiOx thin films in hydrogen atmosphere; Thin Solid Films; Vol. 690
Baskı/Yayın Bilgisi: (2019)

Active IR Thermography Evaluation of Coating Thickness by Determining Apparent Thermal Effusivity; Materials; Vol. 13, iss. 8
Baskı/Yayın Bilgisi: (2020)

An Apparatus for Studying Phosphor Luminescence upon Excitation by Atomic–Molecular Beams; Instruments and Experimental Techniques; Vol. 63, iss. 2
Baskı/Yayın Bilgisi: (2020)

Влияние рельефа подложки на напряженно-деформированное состояние и устойчивость термобарьерного покрытия при тепловом ударе; Иерархические материалы: разработка и приложения для новых технологий и надежных конструкций
Baskı/Yayın Bilgisi: (2018)

Quantitative evaluation of building thermal performance by IR thermography inspection data; Thermosense XIX: An International Conference on Thermal Sensing and Imaging, Orlando, April 21, 1997
Baskı/Yayın Bilgisi: (1997)

The research use of silicate coatings with aluminosilicate filler; Journal of Economics and Social Sciences; № 16
Yazar:: Borovoy V. Yu. Vitaliy
Baskı/Yayın Bilgisi: (2020)

Techniques of analysing heat conditions in electron devices of spacecraft; Bulletin of the Tomsk Polytechnic University; Vol. 310, № 3
Yazar:: Belousov А. V.
Baskı/Yayın Bilgisi: (2007)

Synthesis of Photoluminophors Using a Continuous Solid-phase Technology; Procedia Chemistry; Vol. 11 : 1st International Symposium on Inorganic Fluorides: Chemistry and Technology, ISIF 2014, Tomsk, Russia
Baskı/Yayın Bilgisi: (2014)

Влияние полифосфата меламина на термическую стойкость эпоксидной смолы; Ресурсосберегающие технологии в контроле, управлении качеством и безопасности
Yazar:: Вернер Н. Д. Наталья Дмитриевна
Baskı/Yayın Bilgisi: (2023)

Тепловые потери магистральных трубопроводов в условиях полного или частичного затопления; Известия вузов. Проблемы энергетики; № 3-4
Yazar:: Кузнецов Г. В. Гений Владимирович
Baskı/Yayın Bilgisi: (2006)

Digital X-Ray Flat Panel Housing for Operation at Extremely Low Temperatures; Materials Science Forum; Vol. 942 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance
Baskı/Yayın Bilgisi: (2019)

Refractory ceramics based on magnesium–aluminate spinel and periclase of the Satka deposit; Materials Chemistry and Physics; Vol. 313
Baskı/Yayın Bilgisi: (2024)

Effect of Structure and Phase Composition on Thermocyclic Stability of Thermo-Barrier Coatings Zr-O Deposited by Microplasma Method on a Copper Substrate; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Baskı/Yayın Bilgisi: (2018)

Thermal Stability of YBaCuO-Films Deposited by the Method of Laser Ablation; Russian Physics Journal; Vol. 61, iss. 6
Baskı/Yayın Bilgisi: (2018)

Inspecting thermal barrier coatings by IR thermography; Thermosense XXV, Orlando, April 21, 2003
Baskı/Yayın Bilgisi: (2003)

Chain Model for Carbon Nanotube Bundle under Plane Strain Conditions; Materials; Vol. 12 iss. 23
Baskı/Yayın Bilgisi: (2019)

Effect of Sm2O3 additive on the microstructure, magnetic and electrical properties of LiTiZn ferrite ceramics; Solid State Sciences; Vol. 153
Yazar:: Malyshev A. V. Andrei Vladimirovich
Baskı/Yayın Bilgisi: (2024)

Численный анализ влияния радиационного теплообмена на тепловые режимы и тепловые потери теплопроводов; Известия вузов. Проблемы энергетики; № 5-6
Yazar:: Кузнецов Г. В. Гений Владимирович
Baskı/Yayın Bilgisi: (2011)

The Roles of Impurities and Surface Area on Thermal Stability and Oxidation Resistance of BN Nanoplatelets; Nanomaterials; Vol. 14, iss. 7
Baskı/Yayın Bilgisi: (2024)

Study on the damage of Zr63.5Cu23Al9Fe4.5 amorphous and crystalline alloys irradiated by high intensity pulsed ion beam; Journal of Alloys and Compounds; Vol. 923
Baskı/Yayın Bilgisi: (2022)

Fabrication of Ti3SiC2-based pastes for screen printing on paper-derived Al2O3 substrates; Ceramics International; Vol. 44, iss. 7
Baskı/Yayın Bilgisi: (2018)

Synthesis of a novel red phosphor K2xBa1-xTiF6:Mn4+ and its enhanced luminescence performance, thermal stability and waterproofness; Journal of Alloys and Compounds; Vol. 808
Baskı/Yayın Bilgisi: (2019)

Combined effect of zeolite and boric acid on thermal behavior of epoxy composites; Journal of Thermal Analysis and Calorimetry; Vol. 128, iss. 1
Yazar:: Nazarenko O. B. Olga Bronislavovna
Baskı/Yayın Bilgisi: (2017)

Patterns of Stability Loss of Thermal Barrier Coating at Intensive Heat Impact; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
Baskı/Yayın Bilgisi: (2019)

Structural phase states and heat aging of composite electron-beam clad coatings; Surface and Coatings Technology; Vol. 232
Yazar:: Gnyusov S. F. Sergey Fedorovich
Baskı/Yayın Bilgisi: (2013)

Study on thermal shock irradiation resistance of CoCrFeMnNi high entropy alloy by high intensity pulsed ion beam; Journal of Nuclear Materials; Vol. 559
Baskı/Yayın Bilgisi: (2022)

Thermostabilizing BaTiO3 coatings synthesized by detonation spraying method; Surface and Coatings Technology; Vol. 319
Baskı/Yayın Bilgisi: (2016)

Boron Nitride Nanotubes Versus Carbon Nanotubes: A Thermal Stability and Oxidation Behavior Study; Nanomaterials; Vol. 10, iss. 12
Baskı/Yayın Bilgisi: (2020)

Effect of the carbon support graphitization on the activity and thermal stability of Ru-Ba-Cs/C ammonia decomposition catalysts; Reaction Kinetics, Mechanisms and Catalysis; Vol. 127, iss. 1
Baskı/Yayın Bilgisi: (2019)

Effect of Microwave Radiation on the Thermal Properties of the Electroexplosive Copper Nanopowder; Progress in Electromagnetics Research Symposium (PIERS-Toyama)
Baskı/Yayın Bilgisi: (2018)

Characterization of Shivirtui Zeolite Modified with Aluminum Oxyhydroxide Nanofibers; Materials Science Forum; Vol. 942 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance
Yazar:: Murashkina Yu. S. Yuliya Sergeevna
Baskı/Yayın Bilgisi: (2019)

Effect of Molybdenum Texture on the High-Temperature Oxidation Resistance of Zr–1Nb Alloy with a Cr/Mo Coating; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 17, iss. 3
Baskı/Yayın Bilgisi: (2023)

Active Thermal Testing of Delaminations in Heat-Shielding Structures; Russian Journal of Nondestructive Testing; Vol. 55, iss. 3
Yazar:: Chulkov A. O. Arseniy Olegovich
Baskı/Yayın Bilgisi: (2019)

Recent Advances in Protective Coatings for Accident Tolerant Zr-Based Fuel Claddings; Coatings; Vol. 11, iss. 5
Baskı/Yayın Bilgisi: (2021)

Epoxy Composites Filled with Sodium Bicarbonate: Thermal and Mechanical Properties; Key Engineering Materials; Vol. 781 : Radiation-Thermal Effects and Processes in Inorganic Materials
Yazar:: Murashkina Yu. Yuliya
Baskı/Yayın Bilgisi: (2018)

Estimation of average mechanical stresses in the growing coating; Physical Mesomechanics; Vol. 12, iss. 1-2
Yazar:: Knyazeva A. G. Anna Georgievna
Baskı/Yayın Bilgisi: (2009)

Формирование и исследование плазменного градиентного покрытия с верхним слоем оксида гафния; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 329, № 10
Baskı/Yayın Bilgisi: (2018)