Droplet evaporation on a structured surface: The role of near wall vortexes in heat and mass transfer; International Journal of Heat and Mass Transfer; Vol. 148
| Parent link: | International Journal of Heat and Mass Transfer Vol. 148.— 2019.— [119126, 23 p. |
|---|---|
| Corporate Authors: | , |
| Other Authors: | , , , |
| Summary: | Title screen Experimental studies on the evaporation of a drop located on a horizontal hot wall with cavities of different diameters of 0.5-2.5 mm were carried out. The wall temperature Tw was constant (74 °C and 83 °C). The evaporation behavior on a structured surface was compared with that on a smooth wall. Instantaneous velocity profiles have been obtained over a single cavity and in the vicinity of several cavities using the Micro Particle Image Velocity method (Micro PIV). It has been established that a hotter liquid is periodically ejected from the cavity, which increases convection inside the drop. The strongest intensification of mass transfer is specific for the largest cavities with a diameter of 2.5 mm. The behavior of the droplet evaporation on a smooth wall coincides with that on a structured surface with a cavity diameter of 0.5 mm. Until now, there have been no data that would link the convection in the drop with the vortexes in the cavity at non-isothermal evaporation and at high heat fluxes. The strongest influence of cavities is manifested in the initial period of evaporation, when a cold drop is placed on a hot wall. Over time, the evaporation rate on a structured wall approaches evaporation on a smooth (unstructured) surface. The article considers the influence of several key factors on the convection in a drop. Режим доступа: по договору с организацией-держателем ресурса |
| Language: | English |
| Published: |
2019
|
| Subjects: | |
| Online Access: | https://doi.org/10.1016/j.ijheatmasstransfer.2019.119126 |
| Format: | xMaterials Electronic Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=661372 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 661372 | ||
| 005 | 20250415135656.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\31738 | ||
| 035 | |a RU\TPU\network\29780 | ||
| 090 | |a 661372 | ||
| 100 | |a 20191209d2019 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 102 | |a NL | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Droplet evaporation on a structured surface: The role of near wall vortexes in heat and mass transfer |f S. Ya. Misyura [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 50 tit.] | ||
| 330 | |a Experimental studies on the evaporation of a drop located on a horizontal hot wall with cavities of different diameters of 0.5-2.5 mm were carried out. The wall temperature Tw was constant (74 °C and 83 °C). The evaporation behavior on a structured surface was compared with that on a smooth wall. Instantaneous velocity profiles have been obtained over a single cavity and in the vicinity of several cavities using the Micro Particle Image Velocity method (Micro PIV). It has been established that a hotter liquid is periodically ejected from the cavity, which increases convection inside the drop. The strongest intensification of mass transfer is specific for the largest cavities with a diameter of 2.5 mm. The behavior of the droplet evaporation on a smooth wall coincides with that on a structured surface with a cavity diameter of 0.5 mm. Until now, there have been no data that would link the convection in the drop with the vortexes in the cavity at non-isothermal evaporation and at high heat fluxes. The strongest influence of cavities is manifested in the initial period of evaporation, when a cold drop is placed on a hot wall. Over time, the evaporation rate on a structured wall approaches evaporation on a smooth (unstructured) surface. The article considers the influence of several key factors on the convection in a drop. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | |t International Journal of Heat and Mass Transfer | ||
| 463 | |t Vol. 148 |v [119126, 23 p. |d 2019 | ||
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a structured surface | |
| 610 | 1 | |a cavity | |
| 610 | 1 | |a droplet evaporation | |
| 610 | 1 | |a evaporation rate | |
| 610 | 1 | |a free convection | |
| 610 | 1 | |a структурированные системы | |
| 610 | 1 | |a полости | |
| 610 | 1 | |a испарение | |
| 610 | 1 | |a конвекция | |
| 701 | 1 | |a Misyura |b S. Ya. |c specialist in the field of power engineering |c leading researcher of Tomsk Polytechnic University, candidate of technical sciences |f 1964- |g Sergey Yakovlevich |3 (RuTPU)RU\TPU\pers\39641 | |
| 701 | 1 | |a Kuznetsov |b G. V. |c Specialist in the field of heat power energy |c Professor of Tomsk Polytechnic University, Doctor of Physical and Mathematical Sciences |f 1949- |g Geny Vladimirovich |3 (RuTPU)RU\TPU\pers\31891 |9 15963 | |
| 701 | 1 | |a Volkov |b R. S. |c specialist in the field of power engineering |c Associate Professor of the Tomsk Polytechnic University, candidate of technical Sciences |f 1987- |g Roman Sergeevich |3 (RuTPU)RU\TPU\pers\33926 |9 17499 | |
| 701 | 1 | |a Morozov |b V. S. |g Vladimir Sergeevich | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Исследовательская школа физики высокоэнергетических процессов |c (2017- ) |3 (RuTPU)RU\TPU\col\23551 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа энергетики |b Научно-образовательный центр И. Н. Бутакова (НОЦ И. Н. Бутакова) |3 (RuTPU)RU\TPU\col\23504 |
| 801 | 2 | |a RU |b 63413507 |c 20191209 |g RCR | |
| 850 | |a 63413507 | ||
| 856 | 4 | |u https://doi.org/10.1016/j.ijheatmasstransfer.2019.119126 | |
| 942 | |c CF | ||