Polylactic acid films implantation into the anterior chamber of eye in vivo; IOP Conference Series: Materials Science and Engineering; Vol. 597 : Prospects of Fundamental Sciences Development (PFSD-2019)
| Parent link: | IOP Conference Series: Materials Science and Engineering Vol. 597 : Prospects of Fundamental Sciences Development (PFSD-2019).— 2019.— [012066, 5 p.] |
|---|---|
| Coauteurs: | Национальный исследовательский Томский политехнический университет Инженерная школа ядерных технологий Лаборатория плазменных гибридных систем, Национальный исследовательский Томский политехнический университет Исследовательская школа физики высокоэнергетических процессов |
| Andere auteurs: | Filippova E. O. Ekaterina Olegovna, Ivanova N. M. Nina Mikhailovna, Pichugin V. F. Vladimir Fyodorovich, Sun Z. |
| Samenvatting: | Title screen The purpose of this research is the study of the influence of thin polylactic acid films implantation on the corneal morphology in vivo experiment. Studies were performed on 8 pubescent female Sylvilagus bachmani rabbits. Polylactic acid films were implanted into the anterior chamber of one animal eye. The feedstock for the films was obtained by dissolving polylactic acid in the chloroform. Before the implantation PLA films were sterilized. The overall duration of the in vivo experiment comprised 21 days. Such methods as visual check, photographic registration, non-contact ocular tonometry and optical coherent tomography of cornea were also used in course of the experiment. Sampling was performed on day 21 after the start of the experiment for morphology studying. Results showed that the implantation of the PLA films into the anterior chamber of eye does not induce an inflammatory reaction and does not increase an intraocular pressure. The study showed the possibility of PLA films using as a corneal implant. |
| Taal: | Engels |
| Gepubliceerd in: |
2019
|
| Onderwerpen: | |
| Online toegang: | https://doi.org/10.1088/1757-899X/597/1/012066 http://earchive.tpu.ru/handle/11683/56966 |
| Formaat: | Elektronisch Hoofdstuk |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=661229 |
Gelijkaardige items
Surface property modification of biocompatible material based on polylactic acid by ion implantation; Surface and Coatings Technology; Vol. 388
Gepubliceerd in: (2020)
Gepubliceerd in: (2020)
Polylactic Acid Thin Films Properties after Steam Sterilization; Inorganic Materials: Applied Research; Vol. 11, iss. 2
Gepubliceerd in: (2020)
Gepubliceerd in: (2020)
Obtaining lactide in the presence para-toluene sulfonic acid; Химия и химическая технология в XXI веке; Т. 2
door: Poharukova Y. E.
Gepubliceerd in: (2015)
door: Poharukova Y. E.
Gepubliceerd in: (2015)
Influence of hydroxyapatite filling degree on mechanical properties of 3D-printed poly(l-lactic acid)-based implantable material1; Междисциплинарные проблемы аддитивных технологий
Gepubliceerd in: (2018)
Gepubliceerd in: (2018)
Study of the morphology and structure of hybrid biodegradable 3d scaffolds based on piezoelectric Poly(l-lactic acid) and rGO/GO for bone tissue engineering; Перспективные материалы конструкционного и функционального назначения
Gepubliceerd in: (2020)
Gepubliceerd in: (2020)
Effect of Low-Temperature Plasma Treatment and gamma Irradiation on the Surface Properties of Thin Films Based on Polylactic Acid; Inorganic Materials: Applied Research; Vol. 12, iss. 3
Gepubliceerd in: (2021)
Gepubliceerd in: (2021)
Influence of Calcium-Phosphate Coating on Wettability of Hybrid Piezoelectric Scaffolds; IOP Conference Series: Materials Science and Engineering; Vol. 597 : Prospects of Fundamental Sciences Development (PFSD-2019)
Gepubliceerd in: (2019)
Gepubliceerd in: (2019)
Composite implants coated with biodegradable polymers prevent stimulating tumor progression; AIP Conference Proceedings; Vol. 1760 : Physics of Cancer: Interdisciplinary Problems and Clinical Applications 2016
Gepubliceerd in: (2016)
Gepubliceerd in: (2016)
Изучение процесса дегидратации/поликонденсации молочной кислоты в условиях микроволнового облучения; Актуальные вопросы химической технологии и защиты окружающей среды
Gepubliceerd in: (2016)
Gepubliceerd in: (2016)
Microwave synthesis of polylactic acid; Renewable plant resources: chemistry, technology, medicine
door: Gusar A. O. Anna Olegovna
Gepubliceerd in: (2017)
door: Gusar A. O. Anna Olegovna
Gepubliceerd in: (2017)
Разработка и исследование композитных скаффолдов из полимолочной кислоты с модифицированной поверхностью; Химия и химическая технология в XXI веке
Gepubliceerd in: (2018)
Gepubliceerd in: (2018)
Синтез сополимеров молочной кислоты с капролактамом и бетулином в условиях микроволнового облучения; Перспективы развития фундаментальных наук; Т. 2 : Химия
Gepubliceerd in: (2016)
Gepubliceerd in: (2016)
The deposition of thin titanium-nitrogen coatings on the surface of PCL-basedscaffolds for vascular tissue engineering; Applied Physics Letters; Vol. 112, iss. 15
Gepubliceerd in: (2018)
Gepubliceerd in: (2018)
Гибридные скэффолды на основе поли(l-молочной кислоты) и восстановленного оксида графена с улучшенным пьезоэлектрическим откликом; Перспективные материалы конструкционного и функционального назначения
Gepubliceerd in: (2022)
Gepubliceerd in: (2022)
Радиационное модифицирование матриксов из полимолочной кислоты; Физико-технические проблемы в науке, промышленности и медицине
door: Кузнецов П. Г.
Gepubliceerd in: (2016)
door: Кузнецов П. Г.
Gepubliceerd in: (2016)
Иодосодержащие материалы на основе полимолочной кислоты; Химия и химическая технология в XXI веке; Т. 2
door: Горенинский С. И. Семен Игоревич
Gepubliceerd in: (2015)
door: Горенинский С. И. Семен Игоревич
Gepubliceerd in: (2015)
Влияние природы инициатора и мощности облучения на микроволновый синтез полимолочной кислоты; Химия и химическая технология в XXI веке
door: Попова В. А. Валентина Александровна
Gepubliceerd in: (2016)
door: Попова В. А. Валентина Александровна
Gepubliceerd in: (2016)
Measurement of new hybrid biodegradable materials modified layer thickness; Язык и мировая культура: взгляд молодых исследователей; Ч. 3
door: Filyukov A. V.
Gepubliceerd in: (2016)
door: Filyukov A. V.
Gepubliceerd in: (2016)
A study of the graphene oxide influence on the morphology and crystalline structure of piezoelectric biodegradable electrospun poly (l-lactic acid)-based scaffolds; Химия и химическая технология в XXI веке
Gepubliceerd in: (2020)
Gepubliceerd in: (2020)
The vibrational spectroscopy of biocompatible polymers; Междисциплинарные проблемы аддитивных технологий
Gepubliceerd in: (2017)
Gepubliceerd in: (2017)
Получение и свойства новых композитов полимолочной кислоты с закрепленным на поверхности иодом; Высокие технологии в современной науке и технике (ВТСНТ-2016)
door: Горенинский С. И. Семен Игоревич
Gepubliceerd in: (2016)
door: Горенинский С. И. Семен Игоревич
Gepubliceerd in: (2016)
Микроволновой синтез сополимеров молочной кислоты и ε-капролактама; Химия и химическая технология в XXI веке
door: Попова В. А. Валентина Александровна
Gepubliceerd in: (2016)
door: Попова В. А. Валентина Александровна
Gepubliceerd in: (2016)
Получение олигомера молочной кислоты; Известия вузов. Химия и химическая технология; Т. 62, № 6
door: Глотова В. Н. Валентина Николаевна
Gepubliceerd in: (2019)
door: Глотова В. Н. Валентина Николаевна
Gepubliceerd in: (2019)
Surface properties of polylactic acid films after plasma treatment; Gas Discharge Plasmas and Their Applications (GDP 2019)
door: Filippova E. O. Ekaterina Olegovna
Gepubliceerd in: (2019)
door: Filippova E. O. Ekaterina Olegovna
Gepubliceerd in: (2019)
Surface modification of biomaterials based on high-molecular polylactic acid and their effect on inflammatory reactions of primary human monocyte-derived macrophages: Perspective for personalized therapy; Materials Science and Engineering: C; Vol. 51
Gepubliceerd in: (2015)
Gepubliceerd in: (2015)
Polylactic Acid Properties after Steam Sterilization and Possibility of Its Using as a Corneal Implant; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
door: Filippova E. O. Ekaterina Olegovna
Gepubliceerd in: (2019)
door: Filippova E. O. Ekaterina Olegovna
Gepubliceerd in: (2019)
Применение газовой хроматографии как метода количественно-качественного анализа синтезированного лактида-сырца; Химия и химическая технология в XXI веке; Т. 2
door: Субботина А. С.
Gepubliceerd in: (2022)
door: Субботина А. С.
Gepubliceerd in: (2022)
Создание композиционных полимерных материалов на основе крахмала и полимолочной кислоты; Химия и химическая технология в XXI веке; Т. 2
door: Таратунина А. С.
Gepubliceerd in: (2022)
door: Таратунина А. С.
Gepubliceerd in: (2022)
The formation of eyeball musculoskeletal stump using a Ni-Ti implant in vivo; IOP Conference Series: Materials Science and Engineering; Vol. 597 : Prospects of Fundamental Sciences Development (PFSD-2019)
Gepubliceerd in: (2019)
Gepubliceerd in: (2019)
The influence of pulsed e-beam treatment on properties of electrospun PLLA scaffolds; Химия и химическая технология в XXI веке
door: Kolesnik I. M.
Gepubliceerd in: (2018)
door: Kolesnik I. M.
Gepubliceerd in: (2018)
Влияние функционализации поверхности арендиазониевой солью на смачиваемость и пьезоэлектрический отклик биоразлагаемых матриксов на основе поли-3-оксибутирата; Перспективные материалы конструкционного и функционального назначения
Gepubliceerd in: (2020)
Gepubliceerd in: (2020)
Разработка и исследование биодеградируемых скаффолдов на основе полимолочной кислоты с модифицированной поверхностью; Химия и химическое образование
Gepubliceerd in: (2017)
Gepubliceerd in: (2017)
Preparation, Structure, and Properties of Track-Etched Membranes Based on Polylactic Acid; Membranes and Membrane Technologies; Vol. 3, iss. 5
Gepubliceerd in: (2021)
Gepubliceerd in: (2021)
Plasma Mediated Chlorhexidine Immobilization onto Polylactic Acid Surface via Carbodiimide Chemistry: Antibacterial and Cytocompatibility Assessment; Polymers; Vol. 13, iss. 8
Gepubliceerd in: (2021)
Gepubliceerd in: (2021)
Surface Modification of Polylactic Acid Films by Atmospheric Pressure Plasma Treatment; AIP Conference Proceedings; Vol. 1882 : Physics of Cancer: Interdisciplinary Problems and Clinical Applications (PC IPCA’17)
door: Kudryavtseva V. L. Valeriya Lvovna
Gepubliceerd in: (2017)
door: Kudryavtseva V. L. Valeriya Lvovna
Gepubliceerd in: (2017)
Review of Hybrid Materials Based on Polyhydroxyalkanoates for Tissue Engineering Applications; Polymers; Vol. 13, iss. 11
door: Pryadko A. Artyom
Gepubliceerd in: (2021)
door: Pryadko A. Artyom
Gepubliceerd in: (2021)
Reactive Magnetron Plasma Modification of Electrospun PLLA Scaffolds with Incorporated Chloramphenicol for Controlled Drug Release; Polymers; Vol. 14, iss. 3
Gepubliceerd in: (2022)
Gepubliceerd in: (2022)
High-temperature oxidation resistance of Ti-implanted E110 alloy; IOP Conference Series: Materials Science and Engineering; Vol. 597 : Prospects of Fundamental Sciences Development (PFSD-2019)
Gepubliceerd in: (2019)
Gepubliceerd in: (2019)
Влияние пленок полимолочной кислоты на течение индуцированной in vivo буллезной кератопатии; Перспективы развития фундаментальных наук; Т. 4 : Биология и фундаментальная медицина
door: Филиппова Е. О. Екатерина Олеговна
Gepubliceerd in: (2021)
door: Филиппова Е. О. Екатерина Олеговна
Gepubliceerd in: (2021)
Love — is anterior to Life
door: Emily E. D.
Gepubliceerd in: (Санкт-Петербург, Лань, 2013)
door: Emily E. D.
Gepubliceerd in: (Санкт-Петербург, Лань, 2013)
Gelijkaardige items
-
Surface property modification of biocompatible material based on polylactic acid by ion implantation; Surface and Coatings Technology; Vol. 388
Gepubliceerd in: (2020) -
Polylactic Acid Thin Films Properties after Steam Sterilization; Inorganic Materials: Applied Research; Vol. 11, iss. 2
Gepubliceerd in: (2020) -
Obtaining lactide in the presence para-toluene sulfonic acid; Химия и химическая технология в XXI веке; Т. 2
door: Poharukova Y. E.
Gepubliceerd in: (2015) -
Influence of hydroxyapatite filling degree on mechanical properties of 3D-printed poly(l-lactic acid)-based implantable material1; Междисциплинарные проблемы аддитивных технологий
Gepubliceerd in: (2018) -
Study of the morphology and structure of hybrid biodegradable 3d scaffolds based on piezoelectric Poly(l-lactic acid) and rGO/GO for bone tissue engineering; Перспективные материалы конструкционного и функционального назначения
Gepubliceerd in: (2020)