Continuous Electron Beam Post-Treatment of EBF3-Fabricated Ti-6Al-4V Parts; Metals; Vol. 9, iss. 6
| Parent link: | Metals Vol. 9, iss. 6.— 2019.— [699, 16 p.] |
|---|---|
| Autores Corporativos: | , |
| Otros Autores: | , , , , , |
| Sumario: | Title screen In the present study, the methods of optical, scanning electron, and transmission electron microscopy as well as X-ray diffraction analysis gained insights into the mechanisms of surface finish and microstructure formation of Ti-6Al-4V parts during an EBF3-process. It was found that the slip band propagation within the outermost surface layer provided dissipation of the stored strain energy associated with martensitic transformations. The latter caused the lath fragmentation as well as precipitation of nanosized β grains and an orthorhombic martensite α″ phase at the secondary α lath boundaries of as-built Ti-6Al-4V parts. The effect of continuous electron beam post-treatment on the surface finish, microstructure, and mechanical properties of EBF3-fabricated Ti-6Al-4V parts was revealed. The brittle outermost surface layer of the EBF3-fabricated samples was melted upon the treatment, resulting in the formation of equiaxial prior β grains of 20 to 30 μm in size with the fragmented acicular α′ phase. Electron-beam irradiation induced transformations within the 70 μm thick molten surface layer and 500 μm thick heat affected zone significantly increased the Vickers microhardness and tensile strength of the EBF3-fabricated Ti-6Al-4V samples. |
| Lenguaje: | inglés |
| Publicado: |
2019
|
| Materias: | |
| Acceso en línea: | http://earchive.tpu.ru/handle/11683/57277 https://doi.org/10.3390/met9060699 |
| Formato: | MixedMaterials Electrónico Capítulo de libro |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=660978 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 660978 | ||
| 005 | 20250409142047.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\31182 | ||
| 090 | |a 660978 | ||
| 100 | |a 20191114d2019 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Continuous Electron Beam Post-Treatment of EBF3-Fabricated Ti-6Al-4V Parts |f A. V. Panin [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 40 tit.] | ||
| 330 | |a In the present study, the methods of optical, scanning electron, and transmission electron microscopy as well as X-ray diffraction analysis gained insights into the mechanisms of surface finish and microstructure formation of Ti-6Al-4V parts during an EBF3-process. It was found that the slip band propagation within the outermost surface layer provided dissipation of the stored strain energy associated with martensitic transformations. The latter caused the lath fragmentation as well as precipitation of nanosized β grains and an orthorhombic martensite α″ phase at the secondary α lath boundaries of as-built Ti-6Al-4V parts. The effect of continuous electron beam post-treatment on the surface finish, microstructure, and mechanical properties of EBF3-fabricated Ti-6Al-4V parts was revealed. The brittle outermost surface layer of the EBF3-fabricated samples was melted upon the treatment, resulting in the formation of equiaxial prior β grains of 20 to 30 μm in size with the fragmented acicular α′ phase. Electron-beam irradiation induced transformations within the 70 μm thick molten surface layer and 500 μm thick heat affected zone significantly increased the Vickers microhardness and tensile strength of the EBF3-fabricated Ti-6Al-4V samples. | ||
| 461 | |t Metals | ||
| 463 | |t Vol. 9, iss. 6 |v [699, 16 p.] |d 2019 | ||
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a additive manufacturing | |
| 610 | 1 | |a electron beam free-form fabrication | |
| 610 | 1 | |a continuous electron beam post-treatment | |
| 610 | 1 | |a surface finish | |
| 610 | 1 | |a microstructure | |
| 610 | 1 | |a surface hardening | |
| 610 | 1 | |a электронные пучки | |
| 610 | 1 | |a добавки | |
| 610 | 1 | |a поверхности | |
| 610 | 1 | |a микроструктура | |
| 701 | 1 | |a Panin |b A. V. |c physicist |c Professor of Tomsk Polytechnic University, doctor of physical and mathematical Sciences |f 1971- |g Alexey Viktorovich |3 (RuTPU)RU\TPU\pers\34630 |9 17992 | |
| 701 | 1 | |a Kazachenok |b M. S. |g Marina Sergeevna | |
| 701 | 1 | |a Perevalova |b O. B. |g Olga Borisovna | |
| 701 | 1 | |a Martynov |b S. A. |c specialist in the field of material science |c engineer of Tomsk Polytechnic University |f 1988- |g Sergey Andreevich |3 (RuTPU)RU\TPU\pers\36371 |9 19442 | |
| 701 | 1 | |a Panina |b A. A. |c physicist |c Associate Professor of Tomsk Polytechnic University, Candidate of physical and mathematical sciences |f 1980- |g Aleksandra Anatolievna |3 (RuTPU)RU\TPU\pers\34583 |9 17945 | |
| 701 | 1 | |a Sklyarova |b E. A. |c physicist |c associate Professor of Tomsk Polytechnic University, candidate of pedagogical Sciences |f 1972- |g Elena Aleksandrovna |3 (RuTPU)RU\TPU\pers\34705 |9 18055 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа ядерных технологий |b Отделение экспериментальной физики |3 (RuTPU)RU\TPU\col\23549 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа новых производственных технологий |b Отделение материаловедения |3 (RuTPU)RU\TPU\col\23508 |
| 801 | 2 | |a RU |b 63413507 |c 20200110 |g RCR | |
| 856 | 4 | |u http://earchive.tpu.ru/handle/11683/57277 | |
| 856 | 4 | |u https://doi.org/10.3390/met9060699 | |
| 942 | |c CF | ||