The relation between the inductive capacity of an oxide surface structure of hard alloys and their wear resistance
| Parent link: | IOP Conference Series: Materials Science and Engineering Vol. 511 : Perspective Materials of Constructional and Medical Purpose.— 2019.— [012040, 7 p.] |
|---|---|
| Autor corporatiu: | , , , |
| Altres autors: | , , , , , |
| Sumari: | Title screen The purpose of this research is to determine the value of specific inductive capacity of oxide structures formed on the contact surfaces of carbide cutting tools. This paper also deals with the study of the effect of specific inductive capacity of polyoxide structures on the wear resistance of cutting tools exposed to intensive adhesive wear. It was established that the decrease of specific inductive capacity of the oxide film mass formed on the contact surfaces of a wedge leads to the increase of the wear resistance of cutting tools. |
| Idioma: | anglès |
| Publicat: |
2019
|
| Matèries: | |
| Accés en línia: | http://dx.doi.org/10.1088/1757-899X/511/1/012040 http://earchive.tpu.ru/handle/11683/55435 |
| Format: | Electrònic Capítol de llibre |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=660541 |
Ítems similars
Research of wear resistance of polycrystalline diamond coatings on hard alloys based on WC-Co
per: Khalafov R. D.
Publicat: (2019)
per: Khalafov R. D.
Publicat: (2019)
Communication research between working capacity of hardalloy cutting tools and fractal dimension of their wear
per: Arefyev (Afef'ev, Arefiev) K. P. Konstantin Petrovich
Publicat: (2016)
per: Arefyev (Afef'ev, Arefiev) K. P. Konstantin Petrovich
Publicat: (2016)
Wear resistance of the surface layers of hard alloys with a multilevel structural phase state
Publicat: (2016)
Publicat: (2016)
Исследование физико-механических свойств керметов на основе ZRC-ZRN-NI
per: Лу Вейлун
Publicat: (2023)
per: Лу Вейлун
Publicat: (2023)
Correlation between Properties of Oxide Compounds Formed on Contact Surfaces of Cutting Tools and Cutting Tool Wear Resistance
per: Nesterenko V. P. Vladimir Petrovich
Publicat: (2018)
per: Nesterenko V. P. Vladimir Petrovich
Publicat: (2018)
Methods of Forecasting Wear Resistance of Cutting Tools Based on the Properties of their Materials
per: Bibik V. L. Vladislav Leonidovich
Publicat: (2014)
per: Bibik V. L. Vladislav Leonidovich
Publicat: (2014)
Dependence of the diffusion wear of the hard alloy surface on its fractal dimension
Publicat: (2017)
Publicat: (2017)
Structural-phase states and wear resistance of surface formed on steel by surfacing
Publicat: (2014)
Publicat: (2014)
Calculation of the Intensity of Adhesive-Fatigue Wear of Cutting Tools
per: Bibik V. L. Vladislav Leonidovich
Publicat: (2016)
per: Bibik V. L. Vladislav Leonidovich
Publicat: (2016)
Influence of the Properties of Surface Polyoxide Structures on Wear Processes in Solid Bodies
Publicat: (2020)
Publicat: (2020)
Wear of steel with ultrasound-induced nanostructuring of the surface layer. Part 1. Mechanical properties and wear resistance
Publicat: (2013)
Publicat: (2013)
Hardness and Abrasive Wear Resistance of Electron Beam Coatings Cladded by Using of "TiB-Titanium Matrix" Composite Powders
Publicat: (2018)
Publicat: (2018)
Changes in the structure and wear resistance of the surface layer of copper under treatment by nitrogen ion beams
Publicat: (2014)
Publicat: (2014)
The effect of thermal cycling by electron-beam surfacing on structure and wear resistance of deposited M2 steel
Publicat: (2012)
Publicat: (2012)
Исследование прочности сцепления бетона со стеклопластиковой арматурой по параметрам электрического сигнала при ударном воздействии
per: Корзенок И. Н.
Publicat: (2016)
per: Корзенок И. Н.
Publicat: (2016)
Effect of Oxidation on Wear Resistance of 3D-Printed Titanium Alloy Ti-6Al-4V Parts
Publicat: (2019)
Publicat: (2019)
Исследование адгезионного износа твердосплавных инструментов при обработке титановых сплавов автореферат диссертации на соискание ученой степени кандидата технических наук спец. 05.03.01
per: Пушных В. А. Виктор Александрович
Publicat: (Томск, [Б. и.], 1980)
per: Пушных В. А. Виктор Александрович
Publicat: (Томск, [Б. и.], 1980)
Structure and abrasive wear resistance of electron-beam carbon-nitrogen coatings
per: Narkevich N. A.
Publicat: (2008)
per: Narkevich N. A.
Publicat: (2008)
Microstructure and Wear Resistance of Surface Layer of Copper Modified by N+ Ion High Fluencies Implantation
Publicat: (2015)
Publicat: (2015)
Электроадгезионные захваты и закрепляющие устройства гибких производственных систем
per: Абраров В. Н. Вагиз Нургалиевич
Publicat: (Москва, Энергоатомиздат, 1991)
per: Абраров В. Н. Вагиз Нургалиевич
Publicat: (Москва, Энергоатомиздат, 1991)
Mechanics of Adhesive Contacts: Experiment and Theory Iakov
per: Lyashenko A.
Publicat: (2019)
per: Lyashenko A.
Publicat: (2019)
Friction and the development of hard alloy surface microstructures during wear
per: Gnyusov S. F. Sergey Fedorovich
Publicat: (1997)
per: Gnyusov S. F. Sergey Fedorovich
Publicat: (1997)
Фрикционная перемешивающая обработка алюминиево-магниевого сплава АМг6БМ инструментом с различной конфигурацией пина
per: Судариков А. В.
Publicat: (2021)
per: Судариков А. В.
Publicat: (2021)
Structure and abrasive wear resistance of R6M5 steel-tungsten carbide composite coatings
per: Gnyusov S. F. Sergey Fedorovich
Publicat: (2012)
per: Gnyusov S. F. Sergey Fedorovich
Publicat: (2012)
Improvement of Wear Resistance of UHMWPE by Adding Solid Lubricating Fillers
Publicat: (2016)
Publicat: (2016)
The Effect of Cu–Mo–S Coatings on Wear Resistance of Copper Friction Pair
Publicat: (2016)
Publicat: (2016)
Wear Resistance of Friction Pair of Metal Composite/Copper under Electric Current
Publicat: (2016)
Publicat: (2016)
Вып. 10
Publicat: (1980)
Publicat: (1980)
Wear of 110G13 steel with ultrasound-induced nanostructuring of the surface layer part 2. Structural research
Publicat: (2013)
Publicat: (2013)
Influence of Wear-Resistant Coating on the Reliability of Replaceable Inserts in Cutting Steel
per: Zhang J.
Publicat: (2020)
per: Zhang J.
Publicat: (2020)
Закономерности формирования структуры алюминиево-магниевых сплавов в условиях адгезионного взаимодействия при сварке трением с перемешиванием автореферат диссертации на соискание ученой степени кандидата технических наук спец. 05.16.09
per: Калашникова Т. А. Татьяна Александровна
Publicat: (Томск, [Б. и.], 2020)
per: Калашникова Т. А. Татьяна Александровна
Publicat: (Томск, [Б. и.], 2020)
Прогнозирование износостойкости режущих инструментов по содержанию водорода в структуре твердых сплавов
per: Пчелинцева Ю. Ю.
Publicat: (2015)
per: Пчелинцева Ю. Ю.
Publicat: (2015)
Study of electrical resistivity of powder materials obtained by oxidation of hard alloys
Publicat: (2001)
Publicat: (2001)
Влияние свойств поверхностных полиоксидных структур на процессы износа твердых тел
Publicat: (2019)
Publicat: (2019)
Wear resistance of composites based on hybrid UHMWPE–PTFE matrix: Mechanical and tribotechnical properties of the matrix
Publicat: (2015)
Publicat: (2015)
Increasing the wear resistance of ultra-high molecular weight polyethylene by adding solid lubricating fillers
Publicat: (2014)
Publicat: (2014)
Increasing wear resistance of bulk uhmw-pe based composite materials by mechanical activation and adding of plasticizer
Publicat: (2008)
Publicat: (2008)
Integrated Quality Ensuring Technique of Plasma Wear Resistant Coatings
Publicat: (2017)
Publicat: (2017)
Влияние газовой среды на износостойкость режущих инструментов
per: Нестеренко В. П.
Publicat: (2003)
per: Нестеренко В. П.
Publicat: (2003)
Компьютерное моделирование СМП с равномерным износом
per: Воробьёв А. В.
Publicat: (2001)
per: Воробьёв А. В.
Publicat: (2001)