Effects of basalt fibers and particles in providing tribotechnical properties of UHMWPE composites under varying wear test conditions; AIP Conference Proceedings; Vol. 2007 : Oil and Gas Engineering (OGE-2018)
| Parent link: | AIP Conference Proceedings Vol. 2007 : Oil and Gas Engineering (OGE-2018).— 2018.— [040013, 6 p.] |
|---|---|
| Corporate Author: | Национальный исследовательский Томский политехнический университет Инженерная школа новых производственных технологий Отделение материаловедения |
| Other Authors: | Panin S. V. Sergey Viktorovich, Aleksenko V. O. Vladislav Olegovich, Kornienko L. A. Lyudmila Aleksandrovna, Buslovich D. Dmitry, Ivanova L. R. Larisa Ryurikovna |
| Summary: | Title screen The mechanical and tribotechnical characteristics of UHMWPE based composites filled with basalt microparticles and fibers under dry friction and various test conditions (P·V) have been studied. It is shown that from the position of increasing resistance to wear under dry sliding friction, basalt particles and fibers during reinforcement of the UHMWPE matrix are equally effective at moderate loading and speed: the wear resistance of composites has increased by 1.5 times with a content of 10 wt. % filler while the coefficient friction – in 1.8 times. Mechanisms of wear of polymer composites based on UHMWPE filled with particles/fibers of basalt under different conditions of triboloading have been discussed. Режим доступа: по договору с организацией-держателем ресурса |
| Language: | English |
| Published: |
2018
|
| Subjects: | |
| Online Access: | https://doi.org/10.1063/1.5051940 |
| Format: | Electronic Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=659746 |
Similar Items
Comparison of mechanical and tribotechnical properties of UHMWPE reinforced with basalt fibers and particles; IOP Conference Series: Materials Science and Engineering; Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science
Published: (2016)
Published: (2016)
Influence of loading short carbon fibers (CF) on tribotechnical properties of UHMWPE composites at various testing conditions; AIP Conference Proceedings; Vol. 2007 : Oil and Gas Engineering (OGE-2018)
Published: (2018)
Published: (2018)
Basalt fiber manufacturing technology and the possibility of its use in dentistry; IOP Conference Series: Materials Science and Engineering; Vol. 98 : Interdisciplinary Problems of Nanotechnology, Biomedicine and Nanotoxicology (Nanobiotech 2015)
Published: (2015)
Published: (2015)
Research mechanical and tribotechnical properties of composites “uhmwpe-ptfe”; Химия и химическая технология в XXI веке; Т. 2
by: Nguyen Xuan Thuc
Published: (2015)
by: Nguyen Xuan Thuc
Published: (2015)
Influence of Carbon Nano- and Micron-Sized Fibers on Structure, Mechanical and Tribotechnical Properties of Polymer Composites with UHMWPE Matrix; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Published: (2016)
Published: (2016)
Comparison of structure and tribotechnical properties of extrudable uhmwpe composites fabricated by additive manufacturing technologies; Междисциплинарные проблемы аддитивных технологий
Published: (2018)
Published: (2018)
Geological-geochemical and mineralogical features of basalt for the production of different product range; Проблемы геологии и освоения недр; Т. 2
by: Sattorov Kh. L.
Published: (2017)
by: Sattorov Kh. L.
Published: (2017)
Comparison of Structure and Tribotechnical Properties of Extrudable UHMWPE Composites Fabricated by HIP and FDM Techniques; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Published: (2018)
Published: (2018)
Influence of Nano- and Microfillers on the Mechanical and Tribotechnical Properties of "UHMWPE-PTFE" Composites; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Published: (2016)
Published: (2016)
Comparison of Mechanical and Tribotechnical Properties of Polymer Composites Made of UHMWPE Powders of Different Size; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Published: (2018)
Published: (2018)
Effect of Type and Size of KH550 Modified Filler on Mechanical and Tribotechnical Properties of UHMWPE Composites; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
Published: (2019)
Published: (2019)
Improvement of Wear Resistance of UHMWPE by Adding Solid Lubricating Fillers; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Published: (2016)
Published: (2016)
Mechanical and Tribotechnical Properties of Polyphenylene Sulfide Composites Reinforced with Carbon Fibers of Various Dimension; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Published: (2018)
Published: (2018)
Automated complex for tribotechnical tests of constructional materials and lubricant environments; Перспективы развития фундаментальных наук
by: Глиненко Е. В.
Published: (2015)
by: Глиненко Е. В.
Published: (2015)
Tribomechanical Characteristics of UHMWPE Carbon Composites under Various Triboloading Conditions; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Published: (2018)
Published: (2018)
Wear resistance of composites based on hybrid UHMWPE–PTFE matrix: Mechanical and tribotechnical properties of the matrix; Journal of Friction and Wear; Vol. 36, iss. 3
Published: (2015)
Published: (2015)
Wear of electroplated gold-based coatings; Physical Mesomechanics; Vol. 19, iss. 4
Published: (2016)
Published: (2016)
Mechanical and Tribotechnical Properties of Polyimide Based Solid Lubricant Composites; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
Published: (2019)
Published: (2019)
Effect of Copper Additives on Mechanical and Tribotechnical Properties of Sintered Composites Al-Sn; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
by: Rusin N. M.
Published: (2016)
by: Rusin N. M.
Published: (2016)
Оценка влияния раствора борной кислоты и температуры на теплоизоляционный материал из базальтовых волокон; Атомная энергия; Т. 101, вып. 6
Published: (2006)
Published: (2006)
Цементы из базальтов: монография
Published: (Киев, Наукова думка, 1983)
Published: (Киев, Наукова думка, 1983)
Structure and Tribomechanical Properties of Polymer Compacts Fabricated by Ultrasonic Consolidation and Compression Moulding of UHMWPE Powder; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Published: (2018)
Published: (2018)
Effect of Hot Densification on Tribotechnical Properties of Sintered (Al-12Si)-40Sn Alloy; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
by: Rusin N. M.
Published: (2017)
by: Rusin N. M.
Published: (2017)
Возможности применения базальтового волокна в ортопедической стоматологии; Перспективы развития фундаментальных наук
by: Караваева Е. М.
Published: (2015)
by: Караваева Е. М.
Published: (2015)
Статистическое изучение химизма базальтов разных формаций
by: Кутолин В. А. Владислав Алексеевич
Published: (Москва, Наука, 1969)
by: Кутолин В. А. Владислав Алексеевич
Published: (Москва, Наука, 1969)
Химия земных и лунных базальтовых пород: 12 чтение им. В. И. Вернадского 12 марта 1970 г.
by: Гаст П. В.
Published: (Москва, Наука, 1973)
by: Гаст П. В.
Published: (Москва, Наука, 1973)
Исследование прочностных свойств базальтофибробетона; Функциональные материалы: разработка, исследование, применение
by: Кочет О. А.
Published: (2017)
by: Кочет О. А.
Published: (2017)
Многокомпонентный антифрикционный композит на основе экструдируемой матрицы "UHMWPE-HDPE-g-VTMS-PP" для аддитивных технологий; Междисциплинарные проблемы аддитивных технологий
Published: (2019)
Published: (2019)
Происхождение базальтовых магм. (Результаты экспериментального изучения природных образований и синтетических систем): пер. с англ.
by: Йодер Г. С.
Published: (Москва, Мир, 1965)
by: Йодер Г. С.
Published: (Москва, Мир, 1965)
Фильтрующий материал для очистки артезианских вод на основе базальтового волокна; Современные техника и технологии; Т. 2
by: Лубнина А. Ю.
Published: (2010)
by: Лубнина А. Ю.
Published: (2010)
Исследование возможности создания износостойких композитов на основе СВМПЭ с применением базальтового волокна; Современные техника и технологии; Т. 2
by: Полтаранин М. А.
Published: (2013)
by: Полтаранин М. А.
Published: (2013)
Технология изготовления базальтового волокна и перспективы его применения в ортопедической стоматологии; Известия вузов. Физика; Т. 57, № 11(2)
Published: (2014)
Published: (2014)
Surface modification of microfibrous materials with nanostructured carbon; Materials Chemistry and Physics; Vol. 186
Published: (2017)
Published: (2017)
Технология и оборудование для получения волокон и нитей специального назначения: учебное пособие
by: Коротеева Л. И.
Published: (Москва, Инфра-М, 2015)
by: Коротеева Л. И.
Published: (Москва, Инфра-М, 2015)
Влияние технологических параметров производства супертонкого базальтового волокна на процессы кристаллизации; Проблемы геологии и освоения недр
by: Денисюк А. Н.
Published: (2009)
by: Денисюк А. Н.
Published: (2009)
Композиционные материалы в атомной промышленности: углеродное и базальтовое волокно; Современные техника и технологии; Т. 2
by: Кобзев К. О.
Published: (2012)
by: Кобзев К. О.
Published: (2012)
Особенности деформирования бетона с базальтовой фиброй; Функциональные материалы: разработка, исследование, применение
by: Кочет О. А.
Published: (2017)
by: Кочет О. А.
Published: (2017)
Плавленые камни. Производство и использование в промышленности: пер. с чеш.
by: Пеликан А. Антонин
Published: (Москва, Металлургиздат, 1959)
by: Пеликан А. Антонин
Published: (Москва, Металлургиздат, 1959)
Использование базальтовых материалов для повышения качества дорожного покрытия; Современные техника и технологии; Т. 2
by: Шатунов Д. А.
Published: (2009)
by: Шатунов Д. А.
Published: (2009)
Прикладная механика: триботехнические показатели качества машин учебное пособие для вузов
by: Горленко О. А. Олег Александрович
Published: (Москва, Юрайт, 2023)
by: Горленко О. А. Олег Александрович
Published: (Москва, Юрайт, 2023)
Similar Items
-
Comparison of mechanical and tribotechnical properties of UHMWPE reinforced with basalt fibers and particles; IOP Conference Series: Materials Science and Engineering; Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science
Published: (2016) -
Influence of loading short carbon fibers (CF) on tribotechnical properties of UHMWPE composites at various testing conditions; AIP Conference Proceedings; Vol. 2007 : Oil and Gas Engineering (OGE-2018)
Published: (2018) -
Basalt fiber manufacturing technology and the possibility of its use in dentistry; IOP Conference Series: Materials Science and Engineering; Vol. 98 : Interdisciplinary Problems of Nanotechnology, Biomedicine and Nanotoxicology (Nanobiotech 2015)
Published: (2015) -
Research mechanical and tribotechnical properties of composites “uhmwpe-ptfe”; Химия и химическая технология в XXI веке; Т. 2
by: Nguyen Xuan Thuc
Published: (2015) -
Influence of Carbon Nano- and Micron-Sized Fibers on Structure, Mechanical and Tribotechnical Properties of Polymer Composites with UHMWPE Matrix; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Published: (2016)