Hydrogen-Permeability of Titanium-Nitride (TiN) Coatings Obtained via the Plasma-Immersion Ion Implantation of Titanium and TiN Vacuum-Arc Deposition on Zr-1%Nb Alloy; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 12, iss. 4

Hydrogen-Permeability of Titanium-Nitride (TiN) Coatings Obtained via the Plasma-Immersion Ion Implantation of Titanium and TiN Vacuum-Arc Deposition on Zr-1%Nb Alloy; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 12, iss. 4

Bibliografski detalji
Parent link:	Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques Vol. 12, iss. 4.— 2018.— [P. 705-709]
Autor kompanije:	Национальный исследовательский Томский политехнический университет Инженерная школа ядерных технологий Отделение экспериментальной физики
Daljnji autori:	Le Zhang, Nikitenkov N. N. Nikolai Nikolaevich, Sutygina A. N. Alina Nikolaevna, Kashkarov E. B. Egor Borisovich, Sypchenko V. S. Vladimir Sergeevich, Babikhina (Babihina) M. N. Mariya Nikolaevna
Sažetak:	Title screen The surface of Zr?1%Nb zirconium-alloy samples is treated with titanium via plasma-immersion ion implantation (PIII). Afterward, TiN coatings are deposited onto the implanted and initial samples by means of vacuum-arc deposition (VAD). Before and after each of the treatments mentioned above, changes in the hydrogen sorption rate, depth distribution of elements, and surface topography are investigated. It is found that separately performed VAD and PIII reduce the hydrogen sorption rate by a factor of 2?15. At the same time, a combination of operations so that PIII is carried out before VAD decreases the sorption rate by one?two orders of magnitude. It is revealed that the key parameter of the aforementioned methods affecting hydrogen permeability, the depth distribution of elements, and the surface topography is the bias value applied to the sample (substrate). In the case of our setup, the optimum biases of PIII and VAD are?1500 and?150 V, respectively. Режим доступа: по договору с организацией-держателем ресурса
Jezik:	engleski
Izdano:	2018
Teme:	электронный ресурс труды учёных ТПУ hydrogen zirconium alloy nitrite titanium ions implantation deposition сплавы циркония нитрид титана ионная имплантация водород осаждение
Online pristup:	https://doi.org/10.1134/S1027451018040080
Format:	Elektronički Poglavlje knjige
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=659714

Slični predmeti

On the Hydrogen Permeability and Adhesion of TiN/Ti Coatings Produced on Zr-1% Nb Alloy by Vacuum Ion-Plasma Methods; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 14, iss. 5
Izdano: (2020)

Influence of Plasma-Immersion Titanium-Ion Implantation on the Kinetics of Hydrogen Penetration into E110 Zirconium Alloy; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 12, No. 3
Izdano: (2018)

Hydrogenation behavior of Ti-implanted Zr-1Nb alloy with TiN films deposited using filtered vacuum arc and magnetron sputtering; Applied Surface Science; Vol. 432, Pt. B
Izdano: (2018)

Thermal Desorption of Hydrogen from Titanium, Zirconium Alloy Zr-1% Nb, and the Thin-Film Ti/Zr-1% Nb System; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 16, iss. 5
od: Sypchenko V. S. Vladimir Sergeevich
Izdano: (2022)

Obtaining Ceramic Based on Si3N4 and TiN by Spark Plasma Sintering; Glass and Ceramics; Vol. 72, iss. 9
od: Evdokimov A. A. Andrey Anatolievich
Izdano: (2016)

Photolysis of crystalline alkali nitrates via excitation of NO3- to the state of symmetry 21E1|; Journal of Photochemistry and Photobiology A: Chemistry; Vol. 315
Izdano: (2016)

Керамика TiN/Ti[5]Si[3] полученная методом SPS; Перспективы развития фундаментальных наук
od: Усиков А. И. Антон Иванович
Izdano: (2014)

Combustion Synthesis of AlN (Al3O3N), BN, ZrN, and TiN in Air and Ceramic Application; Chapter 5; Nitride Ceramics: Combustion Synthesis, Properties, and Applications
Izdano: (2014)

Development of technologies of multilayer nanostructure TiN/TiAlN coatings formation on titanium alloys; 10th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 19-24 September 2010
od: Ryabchikov A. I. Aleksandr Ilyich
Izdano: (2010)

The influence of repetitively pulsed plasma immersion low energy ion implantation on TiN coating formation and properties; Journal of Physics: Conference Series; Vol. 830 : Energy Fluxes and Radiation Effects 2016
Izdano: (2017)

TiN coating effect on the elastoplastic behaviour of Ti film for electron beam exit window; Vacuum; Vol. 143
Izdano: (2017)

Testing of the Ti foil with TiN coating as an exit window of a pulsed electron accelerator; Vacuum; Vol. 199
Izdano: (2022)

Применение метода акустической эмиссии для исследованиия повреждаемости покрытия TiN; Дефектоскопия; № 7
Izdano: (2002)

Interaction of Si Atom with the (001) Surface of TiN, AlN and TaN Compounds; Coatings; Vol. 13, iss. 8
Izdano: (2024)

High Intensity low Aluminum Ion Energy Implantation into Titanium; Ion Implantation Technology (IIT 2018)
Izdano: (2018)

Structure and Properties of CrN/TiN Multi-Layer Coatings Obtained by Vacuum-Arc Plasma-Assisted Deposition Method; Coatings; Vol. 13, iss. 2
Izdano: (2023)

Microstructure, defect structure and hydrogen trapping in zirconium alloy Zr-1Nb treated by plasma immersion Ti ion implantation and deposition; Journal of Alloys and Compounds; Vol. 732
Izdano: (2018)

Investigation of the Features of High-Intensity Implantation of Nitrogen Ions into Titanium; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 17, s. 1
Izdano: (2023)

n Situ Investigation of Thermo-stimulated Decay of Hydrides of Titanium and Zirconium by Means of X-ray Diffraction of Synchrotron Radiation; Physics Procedia; Vol. 84 : Synchrotron and Free electron laser Radiation: generation and application" (SFR-2016)
Izdano: (2016)

Surface Treatments and Residual Stress: Assessing the Implications for Biocompatibility in Titanium Implants; Russian Physics Journal; Vol. 66, iss. 1
od: Prosolov K. A. Konstantin Aleksandrovich
Izdano: (2023)

High-intensity chromium ion implantation into Zr-1Nb alloy; Surface and Coatings Technology; Vol. 383
Izdano: (2020)

Bioactive Surface Engineering of Composite Titanium Implants; Inorganic Materials; Vol. 57, iss. 9
od: Petrovskaya T. S. Tatyana Semyonovna
Izdano: (2021)

Modeling of microstructure and elastic properties of nc-TiN/a-Si3N4 nanocomposite; Computational Materials Science; Vol. 123
Izdano: (2016)

The Interface Influence in TiN/SiN x Multilayer Nanocomposite Under Irradiation; Russian Physics Journal; Vol. 60, iss. 9
Izdano: (2018)

Анализ качества покрытий систем Ti-Si, Ti-Al-Si и одноэлементного многослойного покрытия TiN; Современные техника и технологии; Т. 2
od: Ермошкин А. А.
Izdano: (2012)

Осаждение TiN с помощью дуальной магнетронной распылительной системы; Современные техника и технологии; Т. 3
od: Тупикова О. С. Ольга Сергеевна
Izdano: (2011)

Получение керамики на основе Si3N4 И TiN методом искрового плазменного спекания; Стекло и керамика; № 10
od: Евдокимов А. А. Андрей Анатольевич
Izdano: (2015)

Effect of titanium ion implantation and deposition on hydrogenation behavior of Zr-1Nb alloy; Surface and Coatings Technology; Vol. 308
Izdano: (2016)

(Ti, Al)N and (Ti, Al)N/TiN multilayer coating deposition using filtered vacuum arc plasma; 9th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, 21-21September 2008
Izdano: ()

Numerical Modeling of Thermal Processes and the Effect of Heating of Near-Surface Silicon Layers on the Titanium Accumulation and Diffusion during High-Intensity Pulsed Ion Implantation; Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques; Vol. 19, iss. 4
od: Ivanova A. I. Anna Ivanovna
Izdano: (2025)

Прямой синтез нанодисперсного TiN в импульсной струе электроэрозионной плазмы; Современные техника и технологии; Т. 2
od: Сайгаш А. С. Анастасия Сергеевна
Izdano: (2008)

О возможности полного использования продукта плазмодинамического синтеза для спекания TiN-керамики; Перспективы развития фундаментальных наук
od: Евдокимов А. А. Андрей Анатольевич
Izdano: (2014)

Investigation of High-Intensity Implantation of Titanium Ions into Silicon under Conditions of Beam Energy Impact on the Surface; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 5
Izdano: (2024)

Ultra high fluence implantation of aluminum ions into CP–Ti; Journal of Alloys and Compounds; Vol. 793
Izdano: (2019)

On the Synthesis Mechanism of TiN, ZrN, and HfN During Combustion of Mixtures of Aluminum Nanopowder with TiO2, ZrO2, and HfO2; Refractories and Industrial Ceramics; Vol. 60, iss. 4
od: Root L. O. Lyudmila Olegovna
Izdano: (2019)

Beyond Tissue replacement: The Emerging role of smart implants in healthcare; Materials Today Bio; Vol. 22
Izdano: (2023)

Получение шихты сверхтвердого материала TiN-Cu на основе коаксиального ускорителя с использованием комбинированного электрода; Электричество; № 3
Izdano: (2015)

Получение SPS-TiN-керамики на основе перемолотого побочного продукта плазмодинамического синтеза; Проблемы метрологии нанопорошков и наноматериалов
od: Евдокимов А. А. Андрей Анатольевич
Izdano: (2015)

Получение шихты сверхтвердого материала TiN-Cu на основе коаксиального ускорителя с использованием комбинированного электрода; Электричество; № 6
Izdano: (2015)

Laser-synthesized TiN nanoparticles for biomedical applications: Evaluation of safety, biodistribution and pharmacokinetics; Materials Science and Engineering: C; Vol. 120
Izdano: (2021)