Study of the technological process parameters basis on a mathematical model; IOP Conference Series: Materials Science and Engineering; Vol. 457 : Modern Technologies for Non-Destructive Testing

Study of the technological process parameters basis on a mathematical model; IOP Conference Series: Materials Science and Engineering; Vol. 457 : Modern Technologies for Non-Destructive Testing

Sonraí bibleagrafaíochta
Parent link:	IOP Conference Series: Materials Science and Engineering Vol. 457 : Modern Technologies for Non-Destructive Testing.— 2019.— [012021, 5 p.]
Údar corparáideach:	Национальный исследовательский Томский политехнический университет Инженерная школа неразрушающего контроля и безопасности Отделение контроля и диагностики
Rannpháirtithe:	Plotnikova I. V. Inna Vasilievna, Redko L. A. Lyudmila Anatolevna, Chicherina N. V. Natality Viktorovna, Efremova O. N. Oksana Nikolaevna, Serebryakov S. G.
Achoimre:	Title screen The results of modeling of parameters of technological process are presented in this article. By means of data processing of an experiment the mathematical expressions connecting values of input and output parameters of process are received. On the basis of the regression analysis the system from three equations has been calculated. The check of the constructed model on suitability of application is executed. The received results will allow operating the process parameters so that to minimize the amount of discrepancies in the studied parameter that will lead to increase in production efficiency, decrease in level of marriage, decrease in grade of production, reduction of number of the controlling operations.
Teanga:	Béarla
Foilsithe / Cruthaithe:	2019
Ábhair:	электронный ресурс труды учёных ТПУ технологические процессы математические модели параметры эффективность производство качество брак
Rochtain ar líne:	http://dx.doi.org/10.1088/1757-899X/457/1/012021 http://earchive.tpu.ru/handle/11683/53003
Formáid:	Leictreonach Caibidil leabhair
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=659655

Míreanna comhchosúla

Calculation of macrodefects coordinates in dielectric specimens on the two-dimensional mathematical model of mechanoeletric transformations method; IOP Conference Series: Materials Science and Engineering; Vol. 457 : Modern Technologies for Non-Destructive Testing
de réir: Laas R. A. Roman Aleksandrovich
Foilsithe / Cruthaithe: (2019)

The method of stabilization and reduction of noise in the measurement signal through the "dry" electrodes for electrocardiography; IOP Conference Series: Materials Science and Engineering; Vol. 457 : Modern Technologies for Non-Destructive Testing
Foilsithe / Cruthaithe: (2019)

Vol. 457 : Modern Technologies for Non-Destructive Testing: VII International Conference, 8–13 October 2018, Tomsk, Russian Federation; [proceedings]; IOP Conference Series: Materials Science and Engineering
Foilsithe / Cruthaithe: (2019)

Development of the Production Process Model Based on the Controllable Input Factors; IOP Conference Series: Materials Science and Engineering; Vol. 132 : Modern Technologies for Non-Destructive Testing
Foilsithe / Cruthaithe: (2016)

Researches of air and fuel rate influence on oxygen level in emissions of new type medium power coal boiler; IOP Conference Series: Materials Science and Engineering; Vol. 457 : Modern Technologies for Non-Destructive Testing
Foilsithe / Cruthaithe: (2019)

Modeling of liquid flow in surface discontinuities; IOP Conference Series: Materials Science and Engineering; Vol. 289 : Modern Technologies for Non-Destructive Testing
de réir: Lobanova I. S. Irina Sergeevna
Foilsithe / Cruthaithe: (2018)

Phenomenological model of mechanoelectric transformations in rocks; IOP Conference Series: Materials Science and Engineering; Vol. 289 : Modern Technologies for Non-Destructive Testing
de réir: Fedotov P. I. Pavel Ivanovich
Foilsithe / Cruthaithe: (2018)

Monitoring and Quality Control of Diesel Fraction Production Process; IOP Conference Series: Materials Science and Engineering; Vol. 189 : Modern Technologies for Non-Destructive Testing
Foilsithe / Cruthaithe: (2017)

Injection Process Control of the Well at the Hydrodynamic Research of Coalbed; IOP Conference Series: Materials Science and Engineering; Vol. 189 : Modern Technologies for Non-Destructive Testing
Foilsithe / Cruthaithe: (2017)

X-ray Tomographic System Behavior Prediction Based on a Mathematical Model; IOP Conference Series: Materials Science and Engineering; Vol. 189 : Modern Technologies for Non-Destructive Testing
de réir: Baus S. S.
Foilsithe / Cruthaithe: (2017)

Investigation of vibration impact on metrological characteristics of measuring devices in conditions of pump station №5 channel named after Satpayeva; IOP Conference Series: Materials Science and Engineering; Vol. 457 : Modern Technologies for Non-Destructive Testing
de réir: Ayzhambayeva S. Zh.
Foilsithe / Cruthaithe: (2019)

Research into spontaneous activity of myocardial cells under normal and pathological conditions using the hardware and software complex based on nanosensors; IOP Conference Series: Materials Science and Engineering; Vol. 457 : Modern Technologies for Non-Destructive Testing
Foilsithe / Cruthaithe: (2019)

Radial-piston pump for drive of test machines; IOP Conference Series: Materials Science and Engineering; Vol. 289 : Modern Technologies for Non-Destructive Testing
Foilsithe / Cruthaithe: (2018)

The in-process control of PVC sheath of a double core cable; IOP Conference Series: Materials Science and Engineering; Vol. 289 : Modern Technologies for Non-Destructive Testing
de réir: Galeeva N. S.
Foilsithe / Cruthaithe: (2018)

Determination technique of quasireference value of a carrier radio signal frequency of uncooperated onboard lighting source during radio monitoring; IOP Conference Series: Materials Science and Engineering; Vol. 457 : Modern Technologies for Non-Destructive Testing
Foilsithe / Cruthaithe: (2019)

Integrative Modeling of Electrical Properties of Pacemaker Cardiac Cells; IOP Conference Series: Materials Science and Engineering; Vol. 132 : Modern Technologies for Non-Destructive Testing
de réir: Grigoriev M. G. Mikhail Georgievich
Foilsithe / Cruthaithe: (2016)

High-Energy X-ray Radiation Registration Model; IOP Conference Series: Materials Science and Engineering; Vol. 189 : Modern Technologies for Non-Destructive Testing
de réir: Osipov S. P. Sergey Pavlovich
Foilsithe / Cruthaithe: (2017)

Review of Studies of Mechanoelectrical Transformations in Rocks in Russia and Abroad; IOP Conference Series: Materials Science and Engineering; Vol. 132 : Modern Technologies for Non-Destructive Testing
de réir: Pomishin E.
Foilsithe / Cruthaithe: (2016)

Feasibility of using T-shaped feedback in teraohmmeters; IOP Conference Series: Materials Science and Engineering; Vol. 289 : Modern Technologies for Non-Destructive Testing
de réir: Yermoshin N. I.
Foilsithe / Cruthaithe: (2018)

Experimental research of the influence of the strength of ore samples on the parameters of an electromagnetic signal during acoustic excitation in the process of uniaxial compression; IOP Conference Series: Materials Science and Engineering; Vol. 289 : Modern Technologies for Non-Destructive Testing
de réir: Yavorovich L. V. Ludmila Vasilievna
Foilsithe / Cruthaithe: (2018)

Informativeness Improvement of Hardness Test Methods for Metal Product Assessment; IOP Conference Series: Materials Science and Engineering; Vol. 132 : Modern Technologies for Non-Destructive Testing
Foilsithe / Cruthaithe: (2016)

Non-Destructive Testing of Welds
de réir: Raj B. Baldev
Foilsithe / Cruthaithe: (New Delhi, Narosa Publishing House, 2000)

Assessment of the Charging Policy in Energy Efficiency of the Enterprise; IOP Conference Series: Materials Science and Engineering; Vol. 189 : Modern Technologies for Non-Destructive Testing
de réir: Shutov E. A. Eugene Alekseevich
Foilsithe / Cruthaithe: (2017)

Soil ph Control in the Mobile Corrosion Monitoring; IOP Conference Series: Materials Science and Engineering; Vol. 189 : Modern Technologies for Non-Destructive Testing
Foilsithe / Cruthaithe: (2017)

Methods of Statistical Control for Groundwater Quality Indicators; IOP Conference Series: Materials Science and Engineering; Vol. 132 : Modern Technologies for Non-Destructive Testing
de réir: Yankovich E. P. Elena Petrovna
Foilsithe / Cruthaithe: (2016)

Simulation of the Focal Spot of the Accelerator Bremsstrahlung Radiation; IOP Conference Series: Materials Science and Engineering; Vol. 132 : Modern Technologies for Non-Destructive Testing
de réir: Sorokin V. B. Vladimir Borisovich
Foilsithe / Cruthaithe: (2016)

Simulation of Electrical Characteristics of a Solar Panel; IOP Conference Series: Materials Science and Engineering; Vol. 132 : Modern Technologies for Non-Destructive Testing
de réir: Obukhov S. G. Sergey Gennadievich
Foilsithe / Cruthaithe: (2016)

Influence of metallic additives on manganese ferrites sintering; IOP Conference Series: Materials Science and Engineering; Vol. 289 : Modern Technologies for Non-Destructive Testing
de réir: Shevelev S. A. Sergey Anatolievich
Foilsithe / Cruthaithe: (2018)

Integrated microelectromechanical gyroscope under shock loads; IOP Conference Series: Materials Science and Engineering; Vol. 289 : Modern Technologies for Non-Destructive Testing
de réir: Nesterenko T. G. Tamara Georgievna
Foilsithe / Cruthaithe: (2018)

Possibility of Using Nonmetallic Check Samples to Assess the Sensitivity of Penetrant Testing; IOP Conference Series: Materials Science and Engineering; Vol. 132 : Modern Technologies for Non-Destructive Testing
Foilsithe / Cruthaithe: (2016)

The Classification of Weld Seam Defects for Quantitative Analysis by means of Ultrasonic Testing; IOP Conference Series: Materials Science and Engineering; Vol. 132 : Modern Technologies for Non-Destructive Testing
Foilsithe / Cruthaithe: (2016)

Method for selecting parameters and assessing efficiency of wind-diesel power plants for autonomous electrical supply systems; IOP Conference Series: Materials Science and Engineering; Vol. 289 : Modern Technologies for Non-Destructive Testing
de réir: Obukhov S. G. Sergey Gennadievich
Foilsithe / Cruthaithe: (2018)

Generation and Analysis of Wire Rope Digital Radiographic Images; IOP Conference Series: Materials Science and Engineering; Vol. 132 : Modern Technologies for Non-Destructive Testing
Foilsithe / Cruthaithe: (2016)

Fuse Selection for the Two-Stage Explosive Type Switches; IOP Conference Series: Materials Science and Engineering; Vol. 189 : Modern Technologies for Non-Destructive Testing
Foilsithe / Cruthaithe: (2017)

Creation of Favourable Conditions for Introducing Hydrogen Fuel in Russia; IOP Conference Series: Materials Science and Engineering; Vol. 132 : Modern Technologies for Non-Destructive Testing
de réir: Boretsky E.
Foilsithe / Cruthaithe: (2016)

The selection criteria elements of X-ray optics system; IOP Conference Series: Materials Science and Engineering; Vol. 289 : Modern Technologies for Non-Destructive Testing
Foilsithe / Cruthaithe: (2018)

High-speed image processing systems in non-destructive testing; Journal of Physics: Conference Series; Vol. 881 : Innovations in Non-Destructive Testing (SibTest 2017)
de réir: Shashev D. V.
Foilsithe / Cruthaithe: (2017)

The study of initial permeability temperature dependences for LiTiZn ferrite ceramics; IOP Conference Series: Materials Science and Engineering; Vol. 289 : Modern Technologies for Non-Destructive Testing
de réir: Petrova A. B. Anna Borisovna
Foilsithe / Cruthaithe: (2018)

Determination of the Optimal Position of Pendulums of an Active Self-balancing Device; IOP Conference Series: Materials Science and Engineering; Vol. 189 : Modern Technologies for Non-Destructive Testing
Foilsithe / Cruthaithe: (2017)

Calculation of Optimal Geometrical Magnification and Spatial Resolution of Betatron Tomograph; IOP Conference Series: Materials Science and Engineering; Vol. 189 : Modern Technologies for Non-Destructive Testing
de réir: Zhong Y.
Foilsithe / Cruthaithe: (2017)