Structure and properties of composite coatings prepared by electron beam melting with “titanium carbide - titanium binder”; Surface and Coatings Technology; Vol. 358

Structure and properties of composite coatings prepared by electron beam melting with “titanium carbide - titanium binder”; Surface and Coatings Technology; Vol. 358

Dades bibliogràfiques
Parent link:	Surface and Coatings Technology Vol. 358.— 2019.— [P. 706-714]
Autor corporatiu:	Национальный исследовательский Томский политехнический университет Инженерная школа новых производственных технологий Отделение материаловедения
Altres autors:	Krinitsyn M. G. Maksim Germanovich, Pribytkov G. A. Gennady Andreevich, Korzhova V. V. Viktoriya Viktorovna, Firsina I. A. Irina Andreevna
Sumari:	Title screen Coatings obtained by electron-beam overlaying of “titanium - titanium carbide” composite powders were investigated. The composite powders have been prepared by self-propagating high-temperature synthesis (SHS) in titanium and carbon reactive powder mixtures. Structural studies of the powders synthesized and of the clad coatings were carried out by X-ray diffractometry, optical metallography, and scanning electron microscopy. The coatings were tested on hardness and abrasive wear resistance. Testing results were discussed in the combination with structure investigation results. Режим доступа: по договору с организацией-держателем ресурса
Idioma:	anglès
Publicat:	2019
Matèries:	электронный ресурс труды учёных ТПУ electron beam melting microstructure mechanical properties titanium titanium carbide электронно-лучевая плавка микроструктура механические свойства титан карбид титана
Accés en línia:	https://doi.org/10.1016/j.surfcoat.2018.12.001
Format:	Electrònic Capítol de llibre
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=659328

Ítems similars

Selection of Technological Parameters of Selective Laser Melting of Mechanocomposite Ti–Nb Powder; Inorganic Materials: Applied Research; Vol. 10, iss. 1
Publicat: (2019)

Structure of composite powders "TiC - high chromium cast iron binder" produced by SHS method; Mechanical Engineering, Automation and Control Systems (MEACS)
per: Kalambaeva S. S.
Publicat: (2014)

Structural-Phase Composition of Tic/Ti Composites and Powders Obtained by Combustion of Green Mixtures Ti-C with a Titanium Excess; High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes; Vol. 24, iss. 3
Publicat: (2020)

Electric Arc Synthesis of Biomorphic Titanium Carbide from Wood Sawdust; Solid Fuel Chemistry; Vol. 56, iss. 3
Publicat: (2022)

Beam Current Effect on Microstructure and Properties of Electron-Beam-Melted Ti-6Al-4V Alloy; Journal of Materials Engineering and Performance; Vol. 28, iss. 10
Publicat: (2019)

Vacuum-free electric arc synthesis of titanium carbide using plant waste-derived carbon; New Journal of Chemistry; Vol. 47
Publicat: (2023)

Structure of Ti-TiC cathodes; Mechanical Engineering, Automation and Control Systems (MEACS)
per: Krinitcyn M. G.
Publicat: (2014)

Titanium Carbide Coating for Hafnium Hydride Neutron Control Rods: In Situ X-ray Diffraction Study; Coatings; Vol. 13, iss. 12
Publicat: (2023)

Fluorination of rutile, electrochemical reduction of titanium fluoride to titanium, and its separation from the electrolyte salts melt; Journal of Chemical Technology and Metallurgy; Vol. 55, № 5
Publicat: (2020)

Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment Part III: Combination with Electrospark Alloying Applied to Additively Manufactured Ti-6Al-4V Titanium Alloy; Metals; Vol. 13, iss. 5
Publicat: (2023)

Influence of manufacturing parameters on microstructure and hydrogen sorption behavior of electron beam melted titanium Ti-6Al-4V alloy; Materials; Vol. 11, iss. 5
Publicat: (2018)

Hydrogen-Induced Phase Transformation and Microstructure Evolution for Ti-6Al-4V Parts Produced by Electron Beam Melting; Metals; Vol. 8, iss. 5
Publicat: (2018)

Modification of the structure of surface layers of commercial titanium in the process of treatment by low-energy high-current electron beams; The Physics of Metals and Metallography; Vol. 117, iss. 6
Publicat: (2016)

Electron Beam Impact on Microstructure and Microhardness of Ti–6Al–4V Titanium Alloy Produced by Wire Electron-Beam Additive Manufacturing Technology and Selective Laser Alloying at Simulation of Electronic-Beam Welding; Physics of Metals and Metallography; Vol. 125, iss. 7
Publicat: (2024)

Multistage kinetics of the synthesis of Ti–TxCy composite; Nanoscience and Technology: An International Journal; Vol. 10, iss. 3
per: Demidov V. N. Valery Nikolaevich
Publicat: (2019)

Process window for electron beam melting of Ti–42Nb wt.%; Journal of Materials Research and Technology; Vol. 25
Publicat: (2023)

Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment. Part I. Commercially Pure Titanium; Metals; Vol. 11, iss. 4
Publicat: (2021)

Combustion Synthesis on Mechanoactivated FeTi+C Powder Mixtures; Energy Fluxes and Radiation Effects (EFRE-2020 online)
Publicat: (2020)

Novel Hybrid Printing of Porous TiC/Ti6Al4V Composites; Advanced Engineering Materials; Vol. 21, iss. 8
Publicat: (2019)

Electric Arc Synthesis of Titanium Carbide Using Carbon Obtained by the Thermal Conversion of Food Industry Wastes; Solid Fuel Chemistry; Vol. 58, iss. 3
Publicat: (2024)

Effect of the Beam Current during the Electron-Beam Melting of Titanium Alloy Ti-6Al-4V on the Structural Features and Phase Transitions in Gas-Phase Hydrogenation; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 13, No. 3
Publicat: (2019)

Microstructure and Phase Composition of 3D Printed Titanium Metal Matrix Composites Based on Ti-Al-V-Fe System and Reinforced with TiC Particles; Russian Physics Journal; Vol. 67, iss. 9
Publicat: (2024)

The effect of pulsed electron beam melting on microstructure, friction and wear of WC–Hadfield steel hard metal; Wear; Vol. 257, iss. 1-2
Publicat: (2004)

Structural study of W2B obtained via mechanical alloying of W, B4C, TiC and graphite before and after He ions irradiation; Nuclear Materials and Energy; Vol. 31
Publicat: (2022)

The High-Temperature In Situ Synchrotron Study of the Structural-Phase Transformations in 3D-Printed Ti–6Al–4V and Ti–5Al–3Mo–V Titanium Alloys; Physics of Metals and Metallography; Vol. 125, iss. 9
Publicat: (2024)

Microstructure and Phase Composition of VT1-0, VT6, and VT14 Titanium Alloys Produced by Wire-Feed Electron-Beam Additive Manufacturing; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 16, iss. 6
Publicat: (2022)

New Ti–35Nb–7Zr–5Ta Alloy Manufacturing by Electron Beam Melting for Medical Application Followed by High Current Pulsed Electron Beam Treatment; Metals; Vol. 11, iss. 7
Publicat: (2021)

Effect of Heat Input on the Microstructure and Phase Composition of Additively Manufactured Ti–6Al–4V Alloy; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 6
per: Kamelina K. D. Kristina Dmitrievna
Publicat: (2024)

Energy input effects on the microstructure and mechanical behavior of Ti–Nb alloy additivelymanufactured by electron beam melting; Materials Science and Engineering: A; Vol. 938
Publicat: (2025)

Formation of nanoscale carbon structures in the surface layer of metals under the impact of high intensity ion beam; Applied Surface Science; Vol. 310
Publicat: (2014)

Extending the SHS combustion concentration limits in Ti + C + Fe powder mixtures by preliminary mechanical activation; Materials Today: Proceedings; Vol. 25, Pt. 3 : III All-Russian Conference (with International Participation) Hot Topics of Solid State Chemistry : From New Ideas to New Materials
Publicat: (2020)

Influence of anisotropy properties and structural inhomogeneity on elasticity and fracture of titanium alloys produced by electron-beam melting; International Journal of Advanced Manufacturing Technology; Vol. 135
Publicat: (2025)

Microstructure, phase composition and hardness of Ti–Au cladding deposited on Ti–6Al–4V substrate by electron beam powder bed fusion method; Vacuum; Vol. 203
Publicat: (2022)

Plasma Deposition of Ti-C-N Coatings in Air; Inorganic Materials: Applied Research; Vol. 9, iss. 3
per: Sivkov A. A. Aleksandr Anatolyevich
Publicat: (2018)

Deposition of cellulose acetate coatings on titanium substrates by electrospraying for biomedical applications; Surface and Coatings Technology; Vol. 494, pt. 2
Publicat: (2024)

Surface Modification of the EBM Ti-6Al-4V Alloy by Pulsed Ion Beam; Metals; Vol. 11, iss. 3
Publicat: (2021)

Thermal Stability of the Structure and Phase Composition of Titanium Treated with Compression Plasma Flows; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 12, iss. 4
Publicat: (2018)

Fluoroammonium Method for Titanium Slag Processing; Steel in Translation; Vol. 52, iss. 7
Publicat: (2022)

Influence of beam current on microstructure of electron beam melted Ti-6Al-4V alloy; Progress in Natural Science: Materials International; Vol. 29, iss. 4
Publicat: (2019)

Hydrogen effect on Ti-6.5Al-3.5Mo-1.5Zr-0.3Si parts produced by electron beam melting; International Journal of Hydrogen Energy; Vol. 44, iss. 55
Publicat: (2019)