Generation of high-intensity aluminum-ion beams at low energy; Technical Physics; Vol. 63, iss. 10

Generation of high-intensity aluminum-ion beams at low energy; Technical Physics; Vol. 63, iss. 10

Bibliografski detalji
Parent link:	Technical Physics: Scientific Journal.— , 1931- Vol. 63, iss. 10.— 2018.— [P. 1516–1524]
Autor kompanije:	Национальный исследовательский Томский политехнический университет Инженерная школа ядерных технологий Научная лаборатория высокоинтенсивной имплантации ионов
Daljnji autori:	Ryabchikov A. I. Aleksandr Ilyich, Shevelev A. E. Aleksey Eduardovich, Ananin P. S. Petr Semenovich, Sivin D. O. Denis Olegovich
Sažetak:	Title screen High-intensity repetitively pulsed beams of low-energy aluminum ions are generated in experiments. A continuous vacuum–arc discharge is used as a generator of metal plasma. Aluminum-ion beams with a current density of up to 0.47 A/cm2 are generated owing to the plasma immersion extraction of ions with subsequent ballistic focusing in the drift space of potential electrodes. Regularities of the generation of high-intensity ion beams are studied at a pulse repetition rate of 105 pulses per second versus bias voltage ranging from 1.2 to 3 kV, pulse duration ranging from 2 to 8 ?s, and residual gas pressure. Transport efficiency and beam focusing are determined by the conditions for neutralization of the space charge. Even under complete filling of the drift space with preliminary injected plasma, the conditions for neutralization of space charge are dynamically varied due to an increase in the space charge upon ballistic focusing. Experimental results are presented to prove formation of a virtual anode under conditions for insufficient plasma injection in the drift space of the beam. It is shown that the transport efficiency of the high-intensity beam may substantially be increased in the presence of argon in the experimental chamber. Режим доступа: по договору с организацией-держателем ресурса
Jezik:	engleski
Izdano:	2018
Teme:	электронный ресурс труды учёных ТПУ ионные пучки ионы алюминия генерация экстракция
Online pristup:	https://doi.org/10.1134/S1063784218100195
Format:	Elektronički Poglavlje knjige
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=659289

Slični predmeti

A Self-Magnetically Insulated Ion Diode for Generating Aluminum Ion Beams; Instruments and Experimental Techniques; Vol. 63, iss. 4
od: Shamanin V. I. Vitaly Igorevich
Izdano: (2020)

High-intensity pulsed ion beam generation in plasma erosion mode; Gas Discharge Plasmas and Their Applications (GDP 2019)
od: Pushkarev A. I. Aleksandr Ivanovich
Izdano: (2019)

High-Current Pulsed Induction Plasma Source for Generation of High Intensity Ion Beams of Various Gases; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Izdano: (2019)

Investigation of Magnetically Insulated Diode for Intense Pulsed Ion Beam Generation for Materials Research; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Izdano: (2019)

Microstructure of Titanium Alloy Modified by High-Intensity Implantation of Low- and MediumEnergy Aluminum Ions; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Izdano: (2019)

High-current pulsed induction plasma source for generation of high intensiti ion biams of different gases; Energy Fluxes and Radiation Effects (EFRE-2016)
Izdano: (2016)

Study of the Regularities of Low- and Super-Low-Energy High-intensity Metal Ion Beams Formation; Energy Fluxes and Radiation Effects (EFRE-2020 online)
Izdano: (2020)

Aluminum HIPIB Production in Ion Diode with Self-Magnetic Isolation; Surface Modification of Materials by Ion Beams (SMMIB-2019)
od: Shamanin V. I. Vitaly Igorevich
Izdano: (2019)

Influence of Vacuum Condition on Generation and Transportation of a High-Intensity Pulsed Ion Beam; EAPPC with BEAMS and MEGAGAUSS, 2016 Estoril [EAPPC 2016, 6th Euro-Asian Pulsed Power Conference ; BEAMS 2016, 21st International Conference on High-Power Particle Beams ; MG-XV, 15th International Conference on Megagauss Magnetic Field Generation and Rlated Tpics]
Izdano: (2016)

High intensity metal ion beam generation; Vacuum; Vol. 143
Izdano: (2017)

The ion beam generation in the self-magnetically insulated ion diode; Gas Discharge Plasmas and Their Applications (GDP 2019)
od: Stepanov A. V. Andrey Vladimirovich
Izdano: (2019)

Regularities of Plasma-Immersion Formation of Long-Pulse High-Intensity Titanium Ion Beams; Russian Physics Journal; Vol. 61, iss. 7
Izdano: (2018)

High-intensity pulsed beam source with tunable operation mode; Journal of Physics: Conference Series; Vol. 830 : Energy Fluxes and Radiation Effects 2016
Izdano: (2017)

Plasma-Immersion Formation of High-Intensity Ion Beams; Technical Physics Letters; Vol. 43, iss. 12
Izdano: (2017)

Low energy, high intensity metal ion implantation method for deep dopant containing layer formation; Surface and Coatings Technology; Vol. 355
Izdano: (2018)

Features of the Formation of Ultralow Energy High-Intensity Metal and Gaseous Ion Beams; IEEE Transactions on Plasma Science; Vol. 49, iss. 9
Izdano: (2021)

Deflection of high-intensity pulsed ion beam in focusing magnetically insulated ion diode with a passive anode; Physics of Plasmas; Vol. 23, iss. 12
Izdano: (2016)

Nitriding of steel 40x with a high-intensity ion beam; Journal of Physics: Conference Series; Vol. 1115 : 6th International Congress "Energy Fluxes and Radiation Effects". 14th International Conference on Modification of Materials with Particle Beams and Plasma Flows (14th CMM)
Izdano: (2018)

Generation and transportation of high-intensity pulsed ion beam at varying background pressures; Laser and Particle Beams; Vol. 35, iss. 4
Izdano: (2017)

Study of energy deposition of intense pulsed ion beam in metal target; Vacuum; Vol. 122
Izdano: (2015)

Special Aspects of High-Intensity Low-Energy Ion Implantation; Russian Physics Journal; Vol. 63, iss. 10
Izdano: (2021)

High intensity, low ion energy implantation of nitrogen in AISI 5140 alloy steel; Surface and Coatings Technology; Vol. 355
Izdano: (2018)

Low energy implantation of nitrogen ions by extended beam with a ballistic focusing in a stainless steel; Gas Discharge Plasmas and Their Applications (GDP 2019)
Izdano: (2019)

High Intensity low Aluminum Ion Energy Implantation into Titanium; Ion Implantation Technology (IIT 2018)
Izdano: (2018)

The Structural Thermal Stability of the Fe80Si7 B13 Alloys Under the Irradiation of High-Intensity Pulsed Ion Beam; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Izdano: (2019)

The influence of a shield on intense ion beam transportation; Laser and Particle Beams; Vol. 31, iss. 3
od: Pushkarev A. I. Aleksandr Ivanovich
Izdano: (2013)

High intensity pulsed ion beam sources and their industrial applications; Surface and Coatings Technology; Vol. 114, iss. 2-3
Izdano: (1999)

Program-Controlled High-Voltage Pulse Generator for Ion Beams Source; 7 International conference on modification of materials with particle beams and plasma flows
od: Dektyarev S. V. Sergey Valentinovich
Izdano: (2004)

Formation of high intensity ion beams with ballistic focusing; Journal of Physics: Conference Series; Vol. 927 : Applied Mathematics and Mechanics in the Aerospace Industry (AMMAI'2020)
Izdano: (2017)

Influence of thermal conductivity on the heating of a substance by a high-intensity ion beam; Soviet Physics Journal; Vol. 29, iss. 6
Izdano: (1986)

Correlation analysis of intense ion beam energy in a self magnetically insulated diode; Laser and Particle Beams; Vol. 32, iss. 2
od: Pushkarev A. I. Aleksandr Ivanovich
Izdano: (2014)

Peculiarities of the formation of high-intensity ion beams of gases, metals and semiconductor materials; Gas Discharge Plasmas and Their Applications (GDP 2019)
Izdano: (2019)

Formation, Focusing and Transport of Highintensity, Low-Energy Metal Ion Beams; Russian Physics Journal; Vol. 63, iss. 10
Izdano: (2021)

Modeling of carbon penetration into silicon structure under the action of pulsed high-intensity ion beam; Surface and Coatings Technology; Vol. 306, Pt. A : Surface Modification of Materials by Ion Beams (SMMIB 2015)
od: Aktaev N. E. Nurken Erbolatovich
Izdano: (2016)

Influence of the space charge of an ion beam on the time-of-flight diagnostics of its composition; Gas Discharge Plasmas and Their Applications (GDP 2019)
Izdano: (2019)

Study on ablation products of zinc by intense pulsed ion beam irradiation; Laser and Particle Beams; Vol. 35, iss. 1
Izdano: (2017)

Intense ion beam generation in a diode with explosive emission cathode in self-magnetically insulated mode; The European Physical Journal D; Vol. 69, iss. 2
od: Pushkarev A. I. Aleksandr Ivanovich
Izdano: (2015)

Structural Modification of Graphene on Copper Substrates Irradiated by Nanosecond High-Intensity Ion Beam; Russian Physics Journal; Vol. 61, No. 8
Izdano: (2018)

Surface Modification of ZrO[2] -3Y[2]O[3] Ceramics with High-Intensity Pulsed N{2+} Ion Beams; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Izdano: (2019)

Generation of boron ion beams by vacuum arc and planar magnetron ion sources; Review of Scientific Instruments; Vol. 90, iss. 10
Izdano: (2019)