Microstructure and Tensile Properties of Cu-Zn Brass after Severe Plastic Deformation; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
| Parent link: | AIP Conference Proceedings Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18).— 2018.— [020301, 4 p.] |
|---|---|
| Autor corporatiu: | |
| Altres autors: | , , , |
| Sumari: | Title screen An experimental investigation of the effect of equal-channel angular pressing (ECAP) on structural changes and mechanical properties of Cu-Zn brass with a low stacking fault energy has been undertaken. It is shown that the main mechanism of deformation is twinning. As the number of passes increases, the density of twins increases too. The shift in the intersecting planes leads to the curvature and distortion of the twin systems formed after preceding passes. As a result of ECAP, both yield strength and strength limit increased while plasticity decreased. Fracture of samples occurs mainly as a result of loss of plasticity, but after 2 and 3 ECAP passes samples also reveal some plastic viscous fracture regions. Режим доступа: по договору с организацией-держателем ресурса |
| Idioma: | anglès |
| Publicat: |
2018
|
| Matèries: | |
| Accés en línia: | https://doi.org/10.1063/1.5083544 |
| Format: | MixedMaterials Electrònic Capítol de llibre |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=659246 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 659246 | ||
| 005 | 20231220145529.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\27718 | ||
| 035 | |a RU\TPU\network\27716 | ||
| 090 | |a 659246 | ||
| 100 | |a 20190128a2018 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 105 | |a y z 100zy | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Microstructure and Tensile Properties of Cu-Zn Brass after Severe Plastic Deformation |f S. Yu. Tarasov [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 6 tit.] | ||
| 330 | |a An experimental investigation of the effect of equal-channel angular pressing (ECAP) on structural changes and mechanical properties of Cu-Zn brass with a low stacking fault energy has been undertaken. It is shown that the main mechanism of deformation is twinning. As the number of passes increases, the density of twins increases too. The shift in the intersecting planes leads to the curvature and distortion of the twin systems formed after preceding passes. As a result of ECAP, both yield strength and strength limit increased while plasticity decreased. Fracture of samples occurs mainly as a result of loss of plasticity, but after 2 and 3 ECAP passes samples also reveal some plastic viscous fracture regions. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\4816 |t AIP Conference Proceedings | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\27575 |t Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18) |o Proceedings of the International conference, 1–5 October 2018, Tomsk, Russia |f National Research Tomsk Polytechnic University (TPU); eds. V. E. Panin, S. G. Psakhie, V. M. Fomin |v [020301, 4 p.] |d 2018 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a микроструктуры | |
| 610 | 1 | |a механические свойства | |
| 610 | 1 | |a растяжения | |
| 610 | 1 | |a медь | |
| 610 | 1 | |a пластические деформации | |
| 610 | 1 | |a угловое прессование | |
| 610 | 1 | |a структурные изменения | |
| 610 | 1 | |a двойникование | |
| 610 | 1 | |a пластичность | |
| 701 | 1 | |a Tarasov |b S. Yu. |c specialist in the field of mechanical engineering |c Professor of Tomsk Polytechnic University, Doctor of technical sciences |f 1959- |g Sergei Yulievich |3 (RuTPU)RU\TPU\pers\31400 |9 15572 | |
| 701 | 1 | |a Filippov |b A. V. |c specialist in the field of mechanical engineering |c assistant of Yurga technological Institute of Tomsk Polytechnic University |f 1988- |g Andrey Vladimirovich |3 (RuTPU)RU\TPU\pers\34612 |9 17974 | |
| 701 | 1 | |a Fortuna |b S. V. | |
| 701 | 1 | |a Vorontsov |b A. V. | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа новых производственных технологий |b Отделение материаловедения |3 (RuTPU)RU\TPU\col\23508 |
| 801 | 2 | |a RU |b 63413507 |c 20190128 |g RCR | |
| 856 | 4 | |u https://doi.org/10.1063/1.5083544 | |
| 942 | |c CF | ||