Acoustic Emission Response to Severe Friction in Deformation by Cutting on Metals and Alloys; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
| Parent link: | AIP Conference Proceedings Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18).— 2018.— [020275, 4 p.] |
|---|---|
| Corporate Authors: | , , |
| מחברים אחרים: | , , , , |
| סיכום: | Title screen The features of waveform and median frequency acoustic emission (AE) signals obtained in deformation by cutting under severe friction between tool and samples have been analyzed experimentally. The samples were prepared from different materials, which provided different cutting regimes. It is established that the change in the conditions of deformation and fracture of the material leads to a significant changes in the AE median and central frequencies as well as in the AE signal amplitude rise and decay times. The AE amplitude portrait of plastic deformation shows notable rise and fall time periods as well as higher frequency level and longer median frequency fall time. Appearing micro and macrocracks corresponds to sharply increasing AE signal amplitude with almost zero rise time. The median frequency is less reduced and fall time is shorter. Режим доступа: по договору с организацией-держателем ресурса |
| שפה: | אנגלית |
| יצא לאור: |
2018
|
| נושאים: | |
| גישה מקוונת: | https://doi.org/10.1063/1.5083518 |
| פורמט: | אלקטרוני Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=659236 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 659236 | ||
| 005 | 20240112092444.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\27704 | ||
| 035 | |a RU\TPU\network\27691 | ||
| 090 | |a 659236 | ||
| 100 | |a 20190125a2018 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 105 | |a y z 100zy | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Acoustic Emission Response to Severe Friction in Deformation by Cutting on Metals and Alloys |f N. N. Shamarin [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 14 tit.] | ||
| 330 | |a The features of waveform and median frequency acoustic emission (AE) signals obtained in deformation by cutting under severe friction between tool and samples have been analyzed experimentally. The samples were prepared from different materials, which provided different cutting regimes. It is established that the change in the conditions of deformation and fracture of the material leads to a significant changes in the AE median and central frequencies as well as in the AE signal amplitude rise and decay times. The AE amplitude portrait of plastic deformation shows notable rise and fall time periods as well as higher frequency level and longer median frequency fall time. Appearing micro and macrocracks corresponds to sharply increasing AE signal amplitude with almost zero rise time. The median frequency is less reduced and fall time is shorter. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\4816 |t AIP Conference Proceedings | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\27575 |t Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18) |o Proceedings of the International conference, 1–5 October 2018, Tomsk, Russia |f National Research Tomsk Polytechnic University (TPU); eds. V. E. Panin, S. G. Psakhie, V. M. Fomin |v [020275, 4 p.] |d 2018 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a акустическая эмиссия | |
| 610 | 1 | |a трение | |
| 610 | 1 | |a деформации | |
| 610 | 1 | |a резка | |
| 610 | 1 | |a металлы | |
| 610 | 1 | |a сплавы | |
| 701 | 1 | |a Shamarin |b N. N. |c specialist in the field of mechanical engineering |c educational master of Yurga technological Institute of Tomsk Polytechnic University |f 1989- |g Nikolay Nikolaevich |3 (RuTPU)RU\TPU\pers\37381 |9 20299 | |
| 701 | 1 | |a Filippov |b A. V. |c specialist in the field of mechanical engineering |c assistant of Yurga technological Institute of Tomsk Polytechnic University |f 1988- |g Andrey Vladimirovich |3 (RuTPU)RU\TPU\pers\34612 |9 17974 | |
| 701 | 1 | |a Tarasov |b S. Yu. |c specialist in the field of mechanical engineering |c Professor of Tomsk Polytechnic University, Doctor of technical sciences |f 1959- |g Sergei Yulievich |3 (RuTPU)RU\TPU\pers\31400 |9 15572 | |
| 701 | 1 | |a Filippova |b E. O. |c physicist |c Professor of Tomsk Polytechnic University, Doctor of Technical Sciences |f 1988- |g Ekaterina Olegovna |y Tomsk |3 (RuTPU)RU\TPU\pers\37038 |9 20053 | |
| 701 | 1 | |a Vorontsov |b A. V. | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Юргинский технологический институт (филиал) (ЮТИ) |b Отделение промышленных технологий (ОПТ) |3 (RuTPU)RU\TPU\col\24717 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа новых производственных технологий |b Отделение материаловедения |3 (RuTPU)RU\TPU\col\23508 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа ядерных технологий |b Лаборатория плазменных гибридных систем |3 (RuTPU)RU\TPU\col\23381 |
| 801 | 2 | |a RU |b 63413507 |c 20190125 |g RCR | |
| 856 | 4 | |u https://doi.org/10.1063/1.5083518 | |
| 942 | |c CF | ||