Additive Manufacturing of Parts from "Titanium Carbide- Titanium" Mechanically Activated Powder; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
| Parent link: | AIP Conference Proceedings Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18).— 2018.— [020245, 4 p.] |
|---|---|
| मुख्य लेखक: | |
| निगमित लेखक: | |
| अन्य लेखक: | , |
| सारांश: | Title screen The structure of the samples obtained with the use of additive technologies from composite powder "titanium carbide-titanium" has been investigated. In this work, a composite powder "TiC+50 vol. % Ti" synthesized by the SHS method is used. Powders of titanium and carbon black were used as raw materials for the synthesis of composite powders with the structure of the metal matrix composite. The porous products of SHS with a calculated binder content of 50% by volume are obtained by burning of cylindrical compacts of powder mixtures. Milling of the carbide particles was carried out using mechanical activation (MA) of the obtained powders. Additive technologies such as Selective laser melting (SLM) and Electron beam melting (EBM) have been used and compared. In the samples obtained, the distribution of carbide particles by volume was described. Microscopic examination of the samples was carried out. Режим доступа: по договору с организацией-держателем ресурса |
| भाषा: | अंग्रेज़ी |
| प्रकाशित: |
2018
|
| विषय: | |
| ऑनलाइन पहुंच: | https://doi.org/10.1063/1.5083488 |
| स्वरूप: | इलेक्ट्रोनिक पुस्तक अध्याय |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=659224 |
समान संसाधन
Thermocatalytic Conversion of Petroleum Paraffin in the Presence of Tungsten Carbide Powders; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
प्रकाशित: (2018)
प्रकाशित: (2018)
Structure and properties of powder cathode materials of titanium - titanium carbide system; Инновационные технологии и экономика в машиностроении; Т. 1
द्वारा: Korosteleva E. N. Elena Nikolaevna
प्रकाशित: (2014)
द्वारा: Korosteleva E. N. Elena Nikolaevna
प्रकाशित: (2014)
Structure formation during sintering of the synthesized powder materials based on titanium carbide; Междисциплинарные проблемы аддитивных технологий
द्वारा: Korosteleva E. N. Elena Nikolaevna
प्रकाशित: (2017)
द्वारा: Korosteleva E. N. Elena Nikolaevna
प्रकाशित: (2017)
Impact Toughness of Ti-6Al-4V Parts Fabricated by Additive Manufacturing; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
प्रकाशित: (2019)
प्रकाशित: (2019)
Investigation of additive manufacturing of parts from mechanically activated powder; Междисциплинарные проблемы аддитивных технологий
द्वारा: Krinitsyn M. G. Maksim Germanovich
प्रकाशित: (2018)
द्वारा: Krinitsyn M. G. Maksim Germanovich
प्रकाशित: (2018)
Investigation of oxidation process of mechanically activated ultrafine iron powders; IOP Conference Series: Materials Science and Engineering; Vol. 110 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2015)
प्रकाशित: (2016)
प्रकाशित: (2016)
Structural Transformations in Air Heated Al-Cr Powder Compacts; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
द्वारा: Pribytkov G. A.
प्रकाशित: (2019)
द्वारा: Pribytkov G. A.
प्रकाशित: (2019)
The Impact of Dispersion on Selective Laser Melting of Titanium and Niobium Fine Powders Mixture; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
प्रकाशित: (2016)
प्रकाशित: (2016)
Combustion of mixtures containing the activated aluminium powder; MATEC Web of Conferences; Vol. 194 : Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment (HMTTSC 2018)
द्वारा: Dubkova Ya. Yana
प्रकाशित: (Les Ulis, EDP Sciences, 2018)
द्वारा: Dubkova Ya. Yana
प्रकाशित: (Les Ulis, EDP Sciences, 2018)
Structure and Mechanical Properties of Coatings Formed by Detonation Spraying of Titanium Powder; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
प्रकाशित: (2017)
प्रकाशित: (2017)
Hardness and Abrasive Wear Resistance of Electron Beam Coatings Cladded by Using of "TiB-Titanium Matrix" Composite Powders; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
प्रकाशित: (2018)
प्रकाशित: (2018)
Metal Powder Composite Based on 316L Stainless Steel Bimodal Powder; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
प्रकाशित: (2019)
प्रकाशित: (2019)
The additive technologies: innovations in nuclear energy; Интеллектуальные энергосистемы; Т. 2
द्वारा: Vergaskina M. A.
प्रकाशित: (2017)
द्वारा: Vergaskina M. A.
प्रकाशित: (2017)
The Influence of Mechanical Activation on the Structure of a ZrO[2(MgO) Nanocrystalline Powder; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
प्रकाशित: (2018)
प्रकाशित: (2018)
Analysis of Dilatometry Data of the Stainless Steel 316L Bimodal Powder Sintering Process; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
प्रकाशित: (2018)
प्रकाशित: (2018)
Structure and Tribomechanical Properties of Polymer Compacts Fabricated by Ultrasonic Consolidation and Compression Moulding of UHMWPE Powder; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
प्रकाशित: (2018)
प्रकाशित: (2018)
Compacting of Highly Dispersed ZrO[2](Y[2]O[3]) Powders; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
प्रकाशित: (2018)
प्रकाशित: (2018)
Comparison of Mechanical and Tribotechnical Properties of Polymer Composites Made of UHMWPE Powders of Different Size; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
प्रकाशित: (2018)
प्रकाशित: (2018)
Structural Analysis of В4С Bimodal Powder Mixture; Advanced Materials Research; Vol. 1085 : Prospects of Fundamental Sciences Development (PFSD-2014)
प्रकाशित: (2015)
प्रकाशित: (2015)
Structure and Properties of Parts Produced by Electron-Beam Additive Manufacturing; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
प्रकाशित: (2017)
प्रकाशित: (2017)
Mechanical Activation of Self-Propagating High Temperature Synthesis in Titanium, Carbon Black and Iron-based Alloy Powder Mixtures; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
प्रकाशित: (2019)
प्रकाशित: (2019)
The effect of mechanical activation of nitinol powder on the interaction with hydrogen; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
द्वारा: Abdulmenova E. V. Ekaterina Vladimirovna
प्रकाशित: (2019)
द्वारा: Abdulmenova E. V. Ekaterina Vladimirovna
प्रकाशित: (2019)
Microstructure of Weld Joint of Additive Manufactured Ti-6Al-4V Alloy; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
द्वारा: Iakhin A. Albert
प्रकाशित: (2019)
द्वारा: Iakhin A. Albert
प्रकाशित: (2019)
DTA/TG Study of ultrafine tungsten carbide powder synthesized in W-C plasma jet; Интеллектуальные энергосистемы; Т. 2
द्वारा: Shatrova K. N.
प्रकाशित: (2014)
द्वारा: Shatrova K. N.
प्रकाशित: (2014)
Electron Beam Additive Manufacturing of TiCx/Ti-6Al-4V Composite; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
द्वारा: Builuk A. Artem
प्रकाशित: (2019)
द्वारा: Builuk A. Artem
प्रकाशित: (2019)
Исследование структуры и свойств оксидной керамики, полученной прессованием и спеканием механически активированных порошков белого электрокорунда и глинозема; Современное материаловедение: материалы и технологии новых поколений
द्वारा: Индюков Д. С. Дмитрий Сергеевич
प्रकाशित: (2014)
द्वारा: Индюков Д. С. Дмитрий Сергеевич
प्रकाशित: (2014)
Structural Comparison of Sintering Products Made of "TiC+Ti" Composite Powders and "Ti+C" Powder Mixtures; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
प्रकाशित: (2017)
प्रकाशित: (2017)
Electron Beam Additive Manufacturing of TiB2/Ti-6Al-4V Composite; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
प्रकाशित: (2019)
प्रकाशित: (2019)
Multicomponent Antifriction Composite Based on Extrudable Matrix "UHMWPE - HDPE-g-VTMS - PP" for Additive Manufacturing; IOP Conference Series: Materials Science and Engineering; Vol. 795 : Mechanical Engineering and Modern Technologies (MEMT2019)
प्रकाशित: (2020)
प्रकाशित: (2020)
Electro-explosive alloying of VT6 alloy surface by boron carbide powder with the subsequent electron-beam treatment; Journal of Physics: Conference Series; Vol. 652 : Gas Discharge Plasmas and Their Applications (GDP 2015)
प्रकाशित: (2015)
प्रकाशित: (2015)
Ultrafine WC-6% Co Alloy Powders Functioning as GTL Catalysts; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
द्वारा: Pivovar V. A.
प्रकाशित: (2019)
द्वारा: Pivovar V. A.
प्रकाशित: (2019)
Obtaining of the titanium powder for additive technologies by hydrogenation; Физико-технические проблемы в науке, промышленности и медицине
द्वारा: Zavazieva D. T.
प्रकाशित: (2016)
द्वारा: Zavazieva D. T.
प्रकाशित: (2016)
Металлы для аддитивного производства: выбор материалов и их свойства; Прогрессивные технологии и экономика в машиностроении
द्वारा: Волошко В. К.
प्रकाशित: (2025)
द्वारा: Волошко В. К.
प्रकाशित: (2025)
Numerical Algorithm for Laser Treatment of Powder Layer with Variable Thickness; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
द्वारा: Soboleva P. Polina
प्रकाशित: (2017)
द्वारा: Soboleva P. Polina
प्रकाशित: (2017)
Электрохимическое гидрирование механически активированного порошкового никелида титана; Иерархические материалы: разработка и приложения для новых технологий и надежных конструкций
द्वारा: Абдульменова Е. В. Екатерина Владимировна
प्रकाशित: (2019)
द्वारा: Абдульменова Е. В. Екатерина Владимировна
प्रकाशित: (2019)
Effect of Fe Base Alloy Content in Ti-C-Fe Base Alloy Powder Mixtures on the SHS Products Structure; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
प्रकाशित: (2016)
प्रकाशित: (2016)
Titanium powder segregation out of cathode deposit of titanium electrolyzers; Изотопы: технологии, материалы и применение
प्रकाशित: (2017)
प्रकाशित: (2017)
Fabrication of "TiC-HSS Steel Binder" Composite Powders by Self-Propagating High Temperature Synthesis; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
प्रकाशित: (2016)
प्रकाशित: (2016)
Structure and Properties of Electron-Beam Coatings, Overlaid of SHS Composite Powders "TiC – Ti", Synthesized in Air; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
द्वारा: Krinitsyn M. G. Maksim Germanovich
प्रकाशित: (2016)
द्वारा: Krinitsyn M. G. Maksim Germanovich
प्रकाशित: (2016)
Influence of Mechanical Activation of Copper Powder on Physicomechanical Changes in Selective Laser Sintering Products; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
प्रकाशित: (2015)
प्रकाशित: (2015)