Impact of Modification Induced Surface Structure Changes upon Deformation Behavior of Polymer Grafts under Cyclic Contact Loading

Chi tiết về thư mục
Parent link:AIP Conference Proceedings
Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18).— 2018.— [020228, 6 p.]
Tác giả của công ty: Национальный исследовательский Томский политехнический университет Инженерная школа новых производственных технологий Отделение материаловедения
Tác giả khác: Panin S. V. Sergey Viktorovich, Antonova L. V., Glushkova Т. V., Ovcharenko E. A., Krivkina E. O., Kudryavtseva Yu. A., Alexenko V. O., Buslovich D. G., Kornienko L. A., Barbarash L. S.
Tóm tắt:Title screen
The structure, mechanical and tribotechnical properties of biofunctionalized biodegradable vascular grafts based on polyhydroxybutyrate/valerate and polycaprolactone were studied. It was shown that the modification results in an almost twofold decrease of the elongation at break value as well as the ultimate strength. It was revealed that at cyclic contact loading under dry sliding friction the modification does not give rise to wear increase, while the value of friction coefficient remains constant when sliding velocity is varied by eight times. Also, the 4-fold decrease of the friction coefficient under the distilled water boundary lubrication was registered, however the volumetric wear (volume of the wear track) increases three-fold regardless the graft modification.
Режим доступа: по договору с организацией-держателем ресурса
Được phát hành: 2018
Những chủ đề:
Truy cập trực tuyến:https://doi.org/10.1063/1.5083471
Định dạng: Điện tử Chương của sách
KOHA link:https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=659212
Miêu tả
Tóm tắt:Title screen
The structure, mechanical and tribotechnical properties of biofunctionalized biodegradable vascular grafts based on polyhydroxybutyrate/valerate and polycaprolactone were studied. It was shown that the modification results in an almost twofold decrease of the elongation at break value as well as the ultimate strength. It was revealed that at cyclic contact loading under dry sliding friction the modification does not give rise to wear increase, while the value of friction coefficient remains constant when sliding velocity is varied by eight times. Also, the 4-fold decrease of the friction coefficient under the distilled water boundary lubrication was registered, however the volumetric wear (volume of the wear track) increases three-fold regardless the graft modification.
Режим доступа: по договору с организацией-держателем ресурса
DOI:10.1063/1.5083471