Selection of the Severe Plastic Deformation Mode for Improving Mechanical Properties of AISI 201 Steel; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
| Parent link: | AIP Conference Proceedings Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18).— 2018.— [020093, 4 p.] |
|---|---|
| Corporate Authors: | , , |
| Andre forfattere: | , , , |
| Summary: | Title screen Experimental studies of severe plastic deformation (SPD) by ABC forging and rolling methods have been carried out. The optimal values of accumulated strain and the deformation temperature for obtaining defect-free samples have been determined. Mechanical properties were established experimentally under compression and tension at ambient temperature. The possibility of increasing the yield strength, strength and ductility due to annealing of deformed samples was studied. According to confocal laser scanning microscopy, a change in the fracture mechanism of the samples was established, which is the main reason for the increase in the relative elongation of the annealed samples. Режим доступа: по договору с организацией-держателем ресурса |
| Sprog: | engelsk |
| Udgivet: |
2018
|
| Fag: | |
| Online adgang: | https://doi.org/10.1063/1.5083336 |
| Format: | MixedMaterials Electronisk Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=659171 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 659171 | ||
| 005 | 20240112092444.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\27622 | ||
| 035 | |a RU\TPU\network\27621 | ||
| 090 | |a 659171 | ||
| 100 | |a 20190123a2018 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 105 | |a y z 100zy | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Selection of the Severe Plastic Deformation Mode for Improving Mechanical Properties of AISI 201 Steel |f S. V. Fortuna [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 14 tit.] | ||
| 330 | |a Experimental studies of severe plastic deformation (SPD) by ABC forging and rolling methods have been carried out. The optimal values of accumulated strain and the deformation temperature for obtaining defect-free samples have been determined. Mechanical properties were established experimentally under compression and tension at ambient temperature. The possibility of increasing the yield strength, strength and ductility due to annealing of deformed samples was studied. According to confocal laser scanning microscopy, a change in the fracture mechanism of the samples was established, which is the main reason for the increase in the relative elongation of the annealed samples. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\4816 |t AIP Conference Proceedings | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\27575 |t Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18) |o Proceedings of the International conference, 1–5 October 2018, Tomsk, Russia |f National Research Tomsk Polytechnic University (TPU); eds. V. E. Panin, S. G. Psakhie, V. M. Fomin |v [020093, 4 p.] |d 2018 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a режимы | |
| 610 | 1 | |a пластические деформации | |
| 610 | 1 | |a механические свойства | |
| 610 | 1 | |a стали | |
| 610 | 1 | |a ковка | |
| 610 | 1 | |a прокатка | |
| 610 | 1 | |a механические свойства | |
| 610 | 1 | |a сканирующая микроскопия | |
| 610 | 1 | |a деформированные образцы | |
| 701 | 1 | |a Fortuna |b S. V. | |
| 701 | 1 | |a Filippov |b A. V. |c specialist in the field of mechanical engineering |c assistant of Yurga technological Institute of Tomsk Polytechnic University |f 1988- |g Andrey Vladimirovich |3 (RuTPU)RU\TPU\pers\34612 |9 17974 | |
| 701 | 1 | |a Tarasov |b S. Yu. |c specialist in the field of mechanical engineering |c Professor of Tomsk Polytechnic University, Doctor of technical sciences |f 1959- |g Sergei Yulievich |3 (RuTPU)RU\TPU\pers\31400 |9 15572 | |
| 701 | 1 | |a Filippova |b E. O. |c physicist |c Professor of Tomsk Polytechnic University, Doctor of Technical Sciences |f 1988- |g Ekaterina Olegovna |y Tomsk |3 (RuTPU)RU\TPU\pers\37038 |9 20053 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Юргинский технологический институт (филиал) (ЮТИ) |b Отделение промышленных технологий (ОПТ) |3 (RuTPU)RU\TPU\col\24717 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа новых производственных технологий |b Отделение материаловедения |3 (RuTPU)RU\TPU\col\23508 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа ядерных технологий |b Лаборатория плазменных гибридных систем |3 (RuTPU)RU\TPU\col\23381 |
| 801 | 2 | |a RU |b 63413507 |c 20190123 |g RCR | |
| 856 | 4 | |u https://doi.org/10.1063/1.5083336 | |
| 942 | |c CF | ||