Graphite Containing Composites Based on Bearing Steel under Boundary Sliding with High Electric Current Density; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
| Parent link: | AIP Conference Proceedings Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18).— 2018.— [020006, 4 p.] |
|---|---|
| Tác giả chính: | |
| Tác giả của công ty: | |
| Tác giả khác: | , |
| Tóm tắt: | Title screen It was shown that rather low wear intensity of sintered graphite-containing composites was achieved in the self-lubrication mode under the influence of electric current in sliding against the copper counterbody. Composites were based on bearing steel, obtained from grinding wastes. The composites were sintered in air medium being protected by graphite powder. It was noted that a change in the concentration of graphite or copper in the primary structure of the composites had little effect on the characteristics of the contact. It was found that the main influence on the contact behavior was due to the oil amount on the sliding surface. It was concluded that long-term contact can be realized if the composite has an open pore space. Режим доступа: по договору с организацией-держателем ресурса |
| Ngôn ngữ: | Tiếng Anh |
| Được phát hành: |
2018
|
| Những chủ đề: | |
| Truy cập trực tuyến: | https://doi.org/10.1063/1.5083249 |
| Định dạng: | Điện tử Chương của sách |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=659132 |
Những quyển sách tương tự
Графитсодержащие композиты на основе подшипниковой стали, проявляющие низкий износ в условиях граничного трения с токосъёмом; Иерархические материалы: разработка и приложения для новых технологий и надежных конструкций
Bằng: Алеутдинова М. И.
Được phát hành: (2018)
Bằng: Алеутдинова М. И.
Được phát hành: (2018)
Wear of Composites Based on Bearing Steel under Action of Electric Current at Boundary Friction against Copper under Different Pressures; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Bằng: Aleutdinova M. I.
Được phát hành: (2018)
Bằng: Aleutdinova M. I.
Được phát hành: (2018)
Surface layer structure of AISI 1020 steel at different stages of dry sliding under electric current of high density; IOP Conference Series: Materials Science and Engineering; Vol. 116 : Advanced Materials and New Technologies in Modern Materials Science
Được phát hành: (2016)
Được phát hành: (2016)
Towards Identifying the Dynamics of Sliding by Acoustic Emission and Vibration; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Được phát hành: (2016)
Được phát hành: (2016)
Average Contact Temperature and Surface Layer Structure in Steel Friction Couple under High Density Electric Current at Different Сontact Pressures; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Bằng: Aleutdinova M. I.
Được phát hành: (2018)
Bằng: Aleutdinova M. I.
Được phát hành: (2018)
Deformation Relief Induced by Scratch Testing on the Surface of Hadfield Steel; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Được phát hành: (2017)
Được phát hành: (2017)
Подшипниковые стали и сплавы, их термическая обработка и свойства: сборник научных трудов; Ч. 1
Được phát hành: (Москва, НПО ВНИПП, 1990)
Được phát hành: (Москва, НПО ВНИПП, 1990)
About wear and average surface temperature of copper or steel contacts at sliding current collection; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
Bằng: Fadin V. V.
Được phát hành: (2015)
Bằng: Fadin V. V.
Được phát hành: (2015)
The Effect of Annealing on Structure and Phase Composition of Ultrafine-Grained AISI 321 Stainless Steel; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Được phát hành: (2018)
Được phát hành: (2018)
Hardening of Austenitic Stainless Steel by Intensive Cross and Screw Rolling; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Được phát hành: (2018)
Được phát hành: (2018)
Effect of Age Hardening on Phase Composition and Microhardness of V-Free and V-Alloyed High-Nitrogen Austenitic Steels; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Được phát hành: (2018)
Được phát hành: (2018)
Copper and Hadfield Steel Deformation Structures near the Friction Surface; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Được phát hành: (2018)
Được phát hành: (2018)
Impact of Modification Induced Surface Structure Changes upon Deformation Behavior of Polymer Grafts under Cyclic Contact Loading; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Được phát hành: (2018)
Được phát hành: (2018)
Dynamics of Friction Processes on Stainless Steel AISI 201 with Coarse and Ultrafine-Grained Structure; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Được phát hành: (2018)
Được phát hành: (2018)
Mesostructures and Mechanical Properties of Porous Alumina Ceramic; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Được phát hành: (2018)
Được phát hành: (2018)
Analysis of Dilatometry Data of the Stainless Steel 316L Bimodal Powder Sintering Process; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Được phát hành: (2018)
Được phát hành: (2018)
Dynamic of Friction on Ultrafine-Grained Cu-Zn Brass; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Được phát hành: (2018)
Được phát hành: (2018)
Surface Layer Structure and Average Contact Temperature of Copper-Containing Materials under Dry Sliding with High Electric Current Density; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Được phát hành: (2016)
Được phát hành: (2016)
Energy of the Surface Layer Deterioration of 1020 Steel and Copper at Dry Sliding against 1045 Steel with a High Electric Current Density; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Bằng: Fadin V. V.
Được phát hành: (2016)
Bằng: Fadin V. V.
Được phát hành: (2016)
Детали машин и основы конструирования. Курсовое проектирование учебное пособие
Bằng: Осипов А. Г.
Được phát hành: (Иркутск, ИРНИТУ, 2019)
Bằng: Осипов А. Г.
Được phát hành: (Иркутск, ИРНИТУ, 2019)
Average Contact Temperature and Morphological Details of the Worn Surface of Copper Based Materials under High Current Density Sliding against Steel; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Bằng: Fadin V. V.
Được phát hành: (2016)
Bằng: Fadin V. V.
Được phát hành: (2016)
Acoustic Emission Evolution during Sliding Friction of Hadfield Steel Single Crystal; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Được phát hành: (2017)
Được phát hành: (2017)
Comparison on Efficiency of Solid-Lubricant Fillers for Polyetheretherketone-Based Composites; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Được phát hành: (2018)
Được phát hành: (2018)
Deformation Relief Evolution during Sliding Friction of Hadfield Steel Single Crystal; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Được phát hành: (2017)
Được phát hành: (2017)
Dynamic Behavior of Friction Ultrafine-Grained AA5052; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Được phát hành: (2018)
Được phát hành: (2018)
Selection of the Severe Plastic Deformation Mode for Improving Mechanical Properties of AISI 201 Steel; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Được phát hành: (2018)
Được phát hành: (2018)
Electrical Sliding Wear of Magnetron Cu-Mo-S Coatings; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
Bằng: Zharkov S. Yu.
Được phát hành: (2019)
Bằng: Zharkov S. Yu.
Được phát hành: (2019)
Закономерности формирования структуры поверхностного слоя стали Гадфильда при трении; Физическая мезомеханика; Т. 9, № 6
Được phát hành: (2006)
Được phát hành: (2006)
Dynamics of Friction Processes on Al-Zn-Mg-Cu Alloy with Coarse-Grained or Ultrafine-Grained Structure; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Được phát hành: (2018)
Được phát hành: (2018)
Tribological Dry Sliding Behavior of Chopped Carbon Fiber Reinforced Polyetheretherketone; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Được phát hành: (2017)
Được phát hành: (2017)
Mechanisms of Deformation of Austenitic Stainless Steel at Cold Rolling; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
Được phát hành: (2019)
Được phát hành: (2019)
Structure and properties of subjected to rapid quenching surface tool steels; Mechanical Engineering, Automation and Control Systems (MEACS)
Được phát hành: (2015)
Được phát hành: (2015)
Материаловедение : специальные стали и сплавы учебное пособие
Bằng: Никулин С. А.
Được phát hành: (Москва, МИСИС, 2013)
Bằng: Никулин С. А.
Được phát hành: (Москва, МИСИС, 2013)
Износ композитов на основе подшипниковой стали под воздействием электрического тока при граничном трении по меди при разных давлениях; Иерархические материалы: разработка и приложения для новых технологий и надежных конструкций
Bằng: Алеутдинова М. И.
Được phát hành: (2018)
Bằng: Алеутдинова М. И.
Được phát hành: (2018)
Surface Morphology of 321 Stainless Steel Obtained by Electron-Beam Wire-Feed Additive Manufacturing Technology; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Được phát hành: (2018)
Được phát hành: (2018)
Материаловедение: методические указания по выполнению практической работы по дисциплине «Материаловедение» для студентов направлений 15.03.12, 23.03.01, 20.03.01, 35.03.02, 27.03.01
Bằng: Горбачева Т. И.
Được phát hành: (Санкт-Петербург, СПбГЛТУ, 2014)
Bằng: Горбачева Т. И.
Được phát hành: (Санкт-Петербург, СПбГЛТУ, 2014)
Strength Properties of 17Mn1Si Steel Welded Joints Subjected to Pulsed Mechanical-Electrophysical Treatment; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Được phát hành: (2018)
Được phát hành: (2018)
The Evolution of Deformation Structures of Seam Weld of Stainless Steel; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
Được phát hành: (2019)
Được phát hành: (2019)
Конструирование узлов и деталей машин: учебное пособие
Bằng: Дунаев П. Ф. Петр Федорович
Được phát hành: (Москва, Академия, 2003)
Bằng: Дунаев П. Ф. Петр Федорович
Được phát hành: (Москва, Академия, 2003)
Конструирование узлов и деталей машин: учебное пособие
Bằng: Дунаев П. Ф. Петр Федорович
Được phát hành: (Москва, Академия, 2004)
Bằng: Дунаев П. Ф. Петр Федорович
Được phát hành: (Москва, Академия, 2004)