Mechanical properties of PLA-based composites for fused deposition modeling technology
| Parent link: | International Journal of Advanced Manufacturing Technology Vol. 97, iss. 1-4.— 2018.— [P. 511-518] |
|---|---|
| Corporate Authors: | , |
| Andre forfattere: | , , , , , |
| Summary: | Title screen To predict the mechanical behavior of 3D printed products, it is important to understand the composite material properties and the effect that parameters of 3D printing process have on the properties of these materials. The mechanical properties of PLA-based composite materials were studied in this work. The mechanical properties of the hot pressed samples were compared to those of the 3D printed samples. The elongation at break and the yield strength of the samples fabricated by 3D printing are decreased by 15–60% compared to those for the hot pressed samples. It has been found that the mechanical properties of 3D printed samples do not practically depending on the deposition scheme. Режим доступа: по договору с организацией-держателем ресурса |
| Sprog: | engelsk |
| Udgivet: |
2018
|
| Fag: | |
| Online adgang: | https://doi.org/10.1007/s00170-018-1953-6 |
| Format: | Electronisk Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=659013 |
Lignende værker
Preparation of Poly(L-lactic acid)/Hydroxyapatite composite scaffolds by fused deposit modeling 3D printing; Materials Today: Proceedings; Vol. 22, Pt. 2 : 2nd International Conference on Nanomaterials and Biomaterials (ICNB 2018)
Udgivet: (2020)
Udgivet: (2020)
A new approach for the immobilization of poly(acrylic) acid as a chemically reactive cross-linker on the surface of poly(lactic) acid-based biomaterials; Materials Science and Engineering: C; Vol. 71
Udgivet: (2017)
Udgivet: (2017)
Manufacturing poly(lactic acid)/metal composites and their characterization; International Journal of Advanced Manufacturing Technology; Vol. 102, iss. 9-12
af: Lebedev S. M. Sergey Mikhailovich
Udgivet: (2019)
af: Lebedev S. M. Sergey Mikhailovich
Udgivet: (2019)
Revealing an important role of piezoelectric polymers in nervous-tissue regeneration: A review; Materials Today Bio; Vol. 25
Udgivet: (2024)
Udgivet: (2024)
Influence of Storage Conditions on the Stability of Lactide; Procedia Chemistry; Vol. 10 : Chemistry and Chemical Engineering in XXI century
Udgivet: (2014)
Udgivet: (2014)
Physico-chemical Evaluation of Antiatherosclerotic Coronary Stent Coatings Based on Poly(lactic acid) Doped with Functionalized Fe@C Nanoparticles; BioNanoScience; Vol. 14
Udgivet: (2024)
Udgivet: (2024)
3D-printed biodegradable composite poly(lactic acid)-based scaffolds with a shape memory effect for bone tissue engineering; Advanced Composites and Hybrid Materials; Vol. 8, iss. 1
Udgivet: (2025)
Udgivet: (2025)
Biological Effect of the Surface Modification of the Fibrous Poly(L-lactic acid) Scaffolds by Radio Frequency Magnetron Sputtering of Different Calcium-Phosphate Targets; BioNanoScience; Vol. 7, iss. 1
Udgivet: (2017)
Udgivet: (2017)
Electrosprayed poly(lactic-co-glycolic acid) particles as a promising drug delivery system for the novel JNK inhibitor IQ-1; European Polymer Journal; Vol. 127
Udgivet: (2020)
Udgivet: (2020)
Surface Modification of PLLA Electrospun Nanofiber Materials for Biomedical Applications; BioNanoScience; Vol. 8, iss. 1
Udgivet: (2018)
Udgivet: (2018)
Effect of Intermediate Ion Cleaning of the Titanium Target on the Structure of Bioresorbable PLLA Scaffolds under Coating Deposition by DC Reactive Magnetron Sputtering; Inorganic Materials: Applied Research; Vol. 11, iss. 3
Udgivet: (2020)
Udgivet: (2020)
Modal Analysis of Additive Manufactured Carbon Fiber Reinforced Polymer Composite: Experiment and Modeling; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Udgivet: (2017)
Udgivet: (2017)
The Growth of 3T3 Fibroblasts on PHB, PLA and PHB/PLA Blend Films at Different Stages of Their Biodegradation In Vitro; Polymers; Vol. 13, iss. 1
Udgivet: (2021)
Udgivet: (2021)
Dehydration/polycondensation of lactic acid under microwave irradiation; Вестник Карагандинского университета. Серия Химия; № 1 (93)
Udgivet: (2019)
Udgivet: (2019)
Feasibility of clinical electron beam formation using polymer materials produced by fused deposition modeling; Physica Medica; Vol. 64
Udgivet: (2019)
Udgivet: (2019)
Influence of lactic acid on the catalytic performance of MDABCO for ring-opening polymerization of l-lactide; Applied Catalysis A: General; Vol. 546
Udgivet: (2017)
Udgivet: (2017)
Porosity Evolution during Composite Synthesis under Loading; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
af: Chumakov Yu. A. Yuri Aleksandrovich
Udgivet: (2017)
af: Chumakov Yu. A. Yuri Aleksandrovich
Udgivet: (2017)
Thermal (infrared) tomography: Terminology, principal procedures, and application to nondestructive testing of composite materials; Russian Journal of Nondestructive Testing; Vol. 46, iss. 3
Udgivet: (2010)
Udgivet: (2010)
Active thermal inspection of composite materials with the use of neural networks; Russian Journal of Nondestructive Testing; Vol. 47, iss. 10
af: Vavilov V. P. Vladimir Platonovich
Udgivet: (2011)
af: Vavilov V. P. Vladimir Platonovich
Udgivet: (2011)
Composite material WC1-x@C as a noble-metal-economic material for hydrogen evolution reaction; Journal of Alloys and Compounds; Vol. 834
Udgivet: (2020)
Udgivet: (2020)
Polymerization of lactic acid oligomers under microwave irradiation; Вестник Карагандинского университета. Серия Химия; Vol. 96, № 4
Udgivet: (2019)
Udgivet: (2019)
Applicability of Poly(styrene-butadiene-styrene) for Three-Dimensional Printing of Tissue-Equivalent Samples; 3D Printing and Additive Manufacturing; Vol. 9, iss. 5
Udgivet: (2022)
Udgivet: (2022)
Poling and annealing of piezoelectric Poly(Vinylidene fluoride) micropillar arrays; Materials Chemistry and Physics; Vol. 239
Udgivet: (2020)
Udgivet: (2020)
Processing of Active Thermal Nondestructive Testing Results by the Method of Wavelet Analysis; Russian Journal of Nondestructive Testing; Vol. 47, iss. 4
af: Vavilov V. P. Vladimir Platonovich
Udgivet: (2011)
af: Vavilov V. P. Vladimir Platonovich
Udgivet: (2011)
Computer-Aided Design of the Composition of Extrudable Polymer–Polymer UHMWPE Composites with Specified Antifriction and Mechanical Properties; Journal of Friction and Wear; Vol. 40, iss. 6
Udgivet: (2019)
Udgivet: (2019)
Specific Features of Nondestructive Testing of Polymer and Composite Materials Using Air-Coupled Ultrasonic Excitation and Laser Vibrometry; Russian Journal of Nondestructive Testing; Vol. 57, iss. 8
Udgivet: (2021)
Udgivet: (2021)
Implementation of Differential Scanning Calorimetry when Studying Polymerization of Compounds Based on Glycolic Acid Ether; Advanced Materials Research; Vol. 1085 : Prospects of Fundamental Sciences Development (PFSD-2014)
Udgivet: (2015)
Udgivet: (2015)
Hierarchical ZIFs@Al2O3 composite materials as effective heterogeneous catalysts; Microporous and Mesoporous Materials; Vol. 297
Udgivet: (2020)
Udgivet: (2020)
Biodegradable Electrically Conductive Polycaprolacton-Based Composites Filled with Carbon Nanotubes; Russian Physics Journal; Vol. 62, iss. 10
af: Lebedev S. M. Sergey Mikhailovich
Udgivet: (2020)
af: Lebedev S. M. Sergey Mikhailovich
Udgivet: (2020)
Investigation of the properties changes observed for plastic samples made by fused deposition modelling under radiation exposure; IOP Conference Series: Materials Science and Engineering; Vol. 1019 : 14th International Forum on Strategic Technology (IFOST 2019)
Udgivet: (2021)
Udgivet: (2021)
Studying stability of CFRP composites to low-energy impact damage by laser vibrometry; Russian Journal of Nondestructive Testing; Vol. 55, iss. 9
Udgivet: (2019)
Udgivet: (2019)
Material Design Methodology for Optimized Wear-Resistant Thermoplastic–Matrix Composites Based on Polyetheretherketone and Polyphenylene Sulfide; Materials; Vol. 13 iss. 3
Udgivet: (2020)
Udgivet: (2020)
Mechanical Strength of Multicomponent Reinforced Composite Structures at Different Temperatures; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Udgivet: (2017)
Udgivet: (2017)
Modeling and Model Verification of the Stress-Strain State of Reinforced Polymer Concrete; Materials; Vol. 16, iss. 9
Udgivet: (2023)
Udgivet: (2023)
Taguchi Optimization of Parameters for Feedstock Fabrication and FDM Manufacturing of Wear-Resistant UHMWPE-Based Composites; Materials; Vol. 13, iss. 12
Udgivet: (2020)
Udgivet: (2020)
Bacterial inhibition and biofilm eradication ability of low-toxic deep eutectic solvents prepared from lactic acid and quaternary ammonium compounds; Materials Letters; Vol. 378
Udgivet: (2025)
Udgivet: (2025)
Mechanical and Rheological Properties of Biodegradable Polycaprolactone/Carbon Nanotube Composites; Russian Physics Journal; Vol. 63, iss. 4
af: Lebedev S. M. Sergey Mikhailovich
Udgivet: (2020)
af: Lebedev S. M. Sergey Mikhailovich
Udgivet: (2020)
Two-Dimensional Zeolitic Imidazolate Framework ZIF-L: A Promising Catalyst for Polymerization; Catalysts; Vol. 12 iss. 5
Udgivet: (2022)
Udgivet: (2022)
One-step production of 3D printed ferroelectric polymer forms using fused deposition modeling; Applied Physics Letters; Vol. 119, iss. 20
Udgivet: (2021)
Udgivet: (2021)
Modeling Acoustic Wave Propagation in Isotropic Medium; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Udgivet: (2017)
Udgivet: (2017)