Mechanical properties of PLA-based composites for fused deposition modeling technology
| Parent link: | International Journal of Advanced Manufacturing Technology Vol. 97, iss. 1-4.— 2018.— [P. 511-518] |
|---|---|
| Korporace: | , |
| Další autoři: | , , , , , |
| Shrnutí: | Title screen To predict the mechanical behavior of 3D printed products, it is important to understand the composite material properties and the effect that parameters of 3D printing process have on the properties of these materials. The mechanical properties of PLA-based composite materials were studied in this work. The mechanical properties of the hot pressed samples were compared to those of the 3D printed samples. The elongation at break and the yield strength of the samples fabricated by 3D printing are decreased by 15–60% compared to those for the hot pressed samples. It has been found that the mechanical properties of 3D printed samples do not practically depending on the deposition scheme. Режим доступа: по договору с организацией-держателем ресурса |
| Jazyk: | angličtina |
| Vydáno: |
2018
|
| Témata: | |
| On-line přístup: | https://doi.org/10.1007/s00170-018-1953-6 |
| Médium: | Elektronický zdroj Kapitola |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=659013 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 659013 | ||
| 005 | 20250303163730.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\27309 | ||
| 090 | |a 659013 | ||
| 100 | |a 20181221d2018 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 102 | |a US | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Mechanical properties of PLA-based composites for fused deposition modeling technology |f S. M. Lebedev [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: p. 518 (16 tit.)] | ||
| 330 | |a To predict the mechanical behavior of 3D printed products, it is important to understand the composite material properties and the effect that parameters of 3D printing process have on the properties of these materials. The mechanical properties of PLA-based composite materials were studied in this work. The mechanical properties of the hot pressed samples were compared to those of the 3D printed samples. The elongation at break and the yield strength of the samples fabricated by 3D printing are decreased by 15–60% compared to those for the hot pressed samples. It has been found that the mechanical properties of 3D printed samples do not practically depending on the deposition scheme. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 1 | |t International Journal of Advanced Manufacturing Technology | |
| 463 | 1 | |t Vol. 97, iss. 1-4 |v [P. 511-518] |d 2018 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a composite polymer materials | |
| 610 | 1 | |a poly(lactic acid) | |
| 610 | 1 | |a mechanical properties | |
| 610 | 1 | |a fused deposition modeling | |
| 610 | 1 | |a композитные материалы | |
| 610 | 1 | |a полимерные материалы | |
| 610 | 1 | |a молочная кислота | |
| 610 | 1 | |a механические характеристики | |
| 610 | 1 | |a моделирование | |
| 610 | 1 | |a наплавление | |
| 701 | 1 | |a Lebedev |b S. M. |c physicist |c Head of the laboratory of Tomsk Polytechnic University, Doctor of technical sciences |f 1954- |g Sergey Mikhailovich |3 (RuTPU)RU\TPU\pers\34631 | |
| 701 | 1 | |a Gefle |b O. S. |c physicist |c Senior researcher of Tomsk Polytechnic University, Candidate of technical sciences |f 1947- |g Olga Semenovna |3 (RuTPU)RU\TPU\pers\33671 | |
| 701 | 1 | |a Amitov |b E. T. |c specialist in the field of material science |c technician of Tomsk Polytechnic University |f 1991- |g Ernar Tanirbergenuly |3 (RuTPU)RU\TPU\pers\33670 | |
| 701 | 1 | |a Zhuravlev |b D. V. |c Specialist in the field of informatics and computer technology |c Assistant of the Department of Tomsk Polytechnic University |f 1989- |g Denis Vladimirovich |3 (RuTPU)RU\TPU\pers\37577 | |
| 701 | 1 | |a Berchuk |b D. Yu. |c specialist in the field of informatics and computer technology |c engineer of Tomsk Polytechnic University |f 1989- |g Denis Yurievich |3 (RuTPU)RU\TPU\pers\35185 | |
| 701 | 1 | |a Mikutsky |b E. A. |g Evgeny Aleksandrovich | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Юргинский технологический институт (филиал) (ЮТИ) |b Кафедра технологии машиностроения (ТМС) |3 (RuTPU)RU\TPU\col\18902 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа новых производственных технологий |b Отделение материаловедения |3 (RuTPU)RU\TPU\col\23508 |
| 801 | 2 | |a RU |b 63413507 |c 20181221 |g RCR | |
| 856 | 4 | |u https://doi.org/10.1007/s00170-018-1953-6 | |
| 942 | |c CF | ||