Influence of loading short carbon fibers (CF) on tribotechnical properties of UHMWPE composites at various testing conditions

מידע ביבליוגרפי
Parent link:AIP Conference Proceedings
Vol. 2007 : Oil and Gas Engineering (OGE-2018).— 2018.— [040014, 6 p.]
מחבר תאגידי: Национальный исследовательский Томский политехнический университет Инженерная школа новых производственных технологий Отделение материаловедения
מחברים אחרים: Panin S. V. Sergey Viktorovich, Aleksenko V. O. Vladislav Olegovich, Kornienko L. A. Lyudmila Aleksandrovna, Buslovich D. Dmitry
סיכום:Title screen
Mechanical and tribotechnical properties of UHMWPE composites filled with short carbon fibers (CF) under dry sliding friction and various testing conditions (P×V) were studied. It is shown that loading of short carbon fibers into UHMWPE gives rise to increase of strength properties of the composites (elasticity modulus, yield strength) by the factor of 1.5-2 and wear resistance up to 2 times. It is suggested that high-strength wear-resistant UHMWPE composites loaded with short carbon microfibers can be used in tribounits under severe conditions (at loads up to 140 N and sliding velocities up to 0.5 m/s).
Режим доступа: по договору с организацией-держателем ресурса
יצא לאור: 2018
נושאים:
גישה מקוונת:https://doi.org/10.1063/1.5051941
פורמט: אלקטרוני Book Chapter
KOHA link:https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=658939

MARC

LEADER 00000naa0a2200000 4500
001 658939
005 20250826135633.0
035 |a (RuTPU)RU\TPU\network\27199 
090 |a 658939 
100 |a 20181218d2018 k||y0engy50 ba 
101 0 |a eng 
135 |a drcn ---uucaa 
181 0 |a i  
182 0 |a b 
200 1 |a Influence of loading short carbon fibers (CF) on tribotechnical properties of UHMWPE composites at various testing conditions  |f S. V. Panin [et al.] 
203 |a Text  |c electronic 
300 |a Title screen 
320 |a [References: 10 tit.] 
330 |a Mechanical and tribotechnical properties of UHMWPE composites filled with short carbon fibers (CF) under dry sliding friction and various testing conditions (P×V) were studied. It is shown that loading of short carbon fibers into UHMWPE gives rise to increase of strength properties of the composites (elasticity modulus, yield strength) by the factor of 1.5-2 and wear resistance up to 2 times. It is suggested that high-strength wear-resistant UHMWPE composites loaded with short carbon microfibers can be used in tribounits under severe conditions (at loads up to 140 N and sliding velocities up to 0.5 m/s). 
333 |a Режим доступа: по договору с организацией-держателем ресурса 
461 0 |0 (RuTPU)RU\TPU\network\4816  |t AIP Conference Proceedings 
463 |t Vol. 2007 : Oil and Gas Engineering (OGE-2018)  |o Proceedings of the Conference, 26 February-2 March 2018, Omsk, Russia  |v [040014, 6 p.]  |d 2018 
610 1 |a электронный ресурс 
610 1 |a труды учёных ТПУ 
610 1 |a углеродные волокна 
610 1 |a триботехнические свойства 
610 1 |a композиты 
610 1 |a испытания 
701 1 |a Panin  |b S. V.  |c specialist in the field of material science  |c Professor of Tomsk Polytechnic University, Doctor of technical sciences  |f 1971-  |g Sergey Viktorovich  |3 (RuTPU)RU\TPU\pers\32910  |9 16758 
701 1 |a Aleksenko  |b V. O.  |c Specialist in the field of material science  |c Engineer Tomsk Polytechnic University  |f 1991-  |g Vladislav Olegovich  |3 (RuTPU)RU\TPU\pers\37533 
701 1 |a Kornienko  |b L. A.  |g Lyudmila Aleksandrovna 
701 1 |a Buslovich  |b D.  |c specialist in material science  |c assistant of Tomsk Polytechnic University  |f 1993-  |g Dmitry  |3 (RuTPU)RU\TPU\pers\40084 
712 0 2 |a Национальный исследовательский Томский политехнический университет  |b Инженерная школа новых производственных технологий  |b Отделение материаловедения  |3 (RuTPU)RU\TPU\col\23508 
801 2 |a RU  |b 63413507  |c 20181218  |g RCR 
856 4 |u https://doi.org/10.1063/1.5051941 
942 |c CF