Analysis and prediction of copper surface roughness obtained by selective laser melting; IOP Conference Series: Materials Science and Engineering; Vol. 441 : Innovations in Engineering and Technology
| Parent link: | IOP Conference Series: Materials Science and Engineering Vol. 441 : Innovations in Engineering and Technology.— 2018.— [012044, 8 p.] |
|---|---|
| প্রধান লেখক: | |
| সংস্থা লেখক: | |
| অন্যান্য লেখক: | , |
| সংক্ষিপ্ত: | Title screen The paper presents the results of experimental studies of the effect of mechanoactivation of the powder, argon shielding gas and the effect of technological modes of melting: the speed of the laser beam, the power of laser radiation, the scanning step, the preliminary temperature of heating the powder material on the surface roughness of the copper powder material obtained by selective laser melting. Experiments on the melting of copper powder are implemented on the installation of layer-by-layer laser melting of the original design, which allows to adjust all technological modes of melting. The surface roughness is determined on the non-contact digital microscope Olympus LEXT OLS4100. The mathematical dependence of the surface layer roughness of copper powder on the technological modes of melting is obtained on the basis of the theory of experiment planning and static processing of the results. The significant parameters of the regime-the power of laser radiation, the speed of the laser beam, the scanning step affecting the roughness of the layer. The positive effect of mechanical activation of powder material and protective atmosphere on the quality of the surface layer is shown. |
| ভাষা: | ইংরেজি |
| প্রকাশিত: |
2018
|
| বিষয়গুলি: | |
| অনলাইন ব্যবহার করুন: | https://doi.org/10.1088/1757-899X/441/1/012044 http://earchive.tpu.ru/handle/11683/57835 |
| বিন্যাস: | বৈদ্যুতিক গ্রন্থের অধ্যায় |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=658885 |
অনুরূপ উপাদানগুলি
Modeling the Temperature Fields of Copper Powder Melting in the Process of Selective Laser Melting; IOP Conference Series: Materials Science and Engineering; Vol. 142 : Innovative Technologies in Engineering
অনুযায়ী: Saprykin A. A. Aleksandr Aleksandrovich
প্রকাশিত: (2016)
অনুযায়ী: Saprykin A. A. Aleksandr Aleksandrovich
প্রকাশিত: (2016)
Investigation of the effects of an intense pulsed ion beam on the surface melting of IN718 superalloy prepared with selective laser melting; Metals; Vol. 10, iss. 9
প্রকাশিত: (2020)
প্রকাশিত: (2020)
Improvement of the Sintered Surface and Bulk of the Product Via Differentiating Laser Sintering (Melting) Modes; IOP Conference Series: Materials Science and Engineering; Vol. 142 : Innovative Technologies in Engineering
প্রকাশিত: (2016)
প্রকাশিত: (2016)
Surface modification of selective laser melted Ti-6Al-4V parts by ultrasonic impact treatment and electron beam irradiation; Иерархические материалы: разработка и приложения для новых технологий и надежных конструкций
অনুযায়ী: Sinyakova E. A.
প্রকাশিত: (2019)
অনুযায়ী: Sinyakova E. A.
প্রকাশিত: (2019)
Obtaining of bioinert alloy with low young's modulus and products for medical applications by selective laser melting; Междисциплинарные проблемы аддитивных технологий
প্রকাশিত: (2017)
প্রকাশিত: (2017)
Evaluation of Physicomechanical Properties of Ti-45Nb Specimens Obtained by Selective Laser Melting; Key Engineering Materials; Vol. 743 : High Technology: Research and Applications (HTRA 2016)
অনুযায়ী: Kovalevskaya Zh. G. Zhanna Gennadievna
প্রকাশিত: (2017)
অনুযায়ী: Kovalevskaya Zh. G. Zhanna Gennadievna
প্রকাশিত: (2017)
Features of the microstructure of Ti–Nb alloy obtained via selective laser melting; Bulletin of the Russian Academy of Sciences: Physics; Vol. 81, iss. 11
প্রকাশিত: (2018)
প্রকাশিত: (2018)
Phase Composition and Microstructure of Ti-Nb Alloy Produced by Selective Laser Melting; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
প্রকাশিত: (2016)
প্রকাশিত: (2016)
Selective Laser Melting of Magnesium; Key Engineering Materials; Vol. 839 : Materials Science, Mechanical Engineering and Energy: Problems and Prospects for Development, MSMEE 2019
প্রকাশিত: (2020)
প্রকাশিত: (2020)
The development of additive technologies for production of ceramic components and parts of a new type by means of selective laser melting; Междисциплинарные проблемы аддитивных технологий
অনুযায়ী: Kolmakov S. V.
প্রকাশিত: (2017)
অনুযায়ী: Kolmakov S. V.
প্রকাশিত: (2017)
Surface Formation Mechanisms in Selective Laser Melting of Cobalt-Chromium-Molybdenum Powder; Key Engineering Materials; Vol. 839: Materials Science, Mechanical Engineering and Energy: Problems and Prospects for Development, MSMEE 2019
প্রকাশিত: (2020)
প্রকাশিত: (2020)
Conditions for Quality Dimensions in Direct Laser Melting of Copper; Key Engineering Materials; Vol. 839 : Materials Science, Mechanical Engineering and Energy: Problems and Prospects for Development, MSMEE 2019
প্রকাশিত: (2020)
প্রকাশিত: (2020)
Surface precision and roughness of deep holes produced by small-diameter gun drills; Russian Engineering Research; Vol. 35, iss. 4
অনুযায়ী: Kirsanov S. V. Sergey Vasilyevich
প্রকাশিত: (2015)
অনুযায়ী: Kirsanov S. V. Sergey Vasilyevich
প্রকাশিত: (2015)
The study of deep holes accuracy and surface roughness after gun drilling; Mechanical Engineering, Automation and Control Systems (MEACS)
অনুযায়ী: Kirsanov S. V. Sergey Vasilyevich
প্রকাশিত: (2014)
অনুযায়ী: Kirsanov S. V. Sergey Vasilyevich
প্রকাশিত: (2014)
The microstructure of heterogeneous materials based on Ni and B4C powders using a cold spray and stratified selective laser melting technologies; Междисциплинарные проблемы аддитивных технологий
প্রকাশিত: (2017)
প্রকাশিত: (2017)
Investigation of the Liquid Flow on Rough Surfaces to Solve the Problems of Liquid Penetrant Testing; Progress in Material Science and Engineering; Vol. 351 : Studies in Systems, Decision and Control (SSDC)
অনুযায়ী: Lobanova G. L. Galina Leonidovna
প্রকাশিত: (2021)
অনুযায়ী: Lobanova G. L. Galina Leonidovna
প্রকাশিত: (2021)
The Mechanism of Forming Coagulated Particles in Selective Laser Melting of Cobalt-Chromium-Molybdenum Powder; Key Engineering Materials; Vol. 839 : Materials Science, Mechanical Engineering and Energy: Problems and Prospects for Development, MSMEE 2019
প্রকাশিত: (2020)
প্রকাশিত: (2020)
Numerical research of influence of laser radiation parameters on the formation of intermetallic phases from metal powders in selective laser melting technology; AIP Conference Proceedings; Vol. 1893 : High-Energy Processes in Condensed Matter (HEPCM 2017)
অনুযায়ী: Agapovichev A. V. Anton Vasiljevich
প্রকাশিত: (2017)
অনুযায়ী: Agapovichev A. V. Anton Vasiljevich
প্রকাশিত: (2017)
Selection of Technological Parameters of Selective Laser Melting of Mechanocomposite Ti–Nb Powder; Inorganic Materials: Applied Research; Vol. 10, iss. 1
প্রকাশিত: (2019)
প্রকাশিত: (2019)
Surface modification of selective laser melted Ti-6Al-4V by ultrasonic impact treatment and electron beam irradiation; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
অনুযায়ী: Sinyakova E. A.
প্রকাশিত: (2019)
অনুযায়ী: Sinyakova E. A.
প্রকাশিত: (2019)
The Impact of Dispersion on Selective Laser Melting of Titanium and Niobium Fine Powders Mixture; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
প্রকাশিত: (2016)
প্রকাশিত: (2016)
Technology for melting amber chips to produce a solid block; IOP Conference Series: Materials Science and Engineering; Vol. 124 : Mechanical Engineering, Automation and Control Systems (MEACS2015)
অনুযায়ী: Vikhareva A. S.
প্রকাশিত: (2016)
অনুযায়ী: Vikhareva A. S.
প্রকাশিত: (2016)
Computational Study of the Mechanical Behavior of Steel Produced by Selective Laser Melting; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
প্রকাশিত: (2016)
প্রকাশিত: (2016)
A behavior model of the viscoelastic system with a melting component under load; IOP Conference Series: Materials Science and Engineering; Vol. 124 : Mechanical Engineering, Automation and Control Systems (MEACS2015)
অনুযায়ী: Chumakov Yu. A. Yuri Aleksandrovich
প্রকাশিত: (2016)
অনুযায়ী: Chumakov Yu. A. Yuri Aleksandrovich
প্রকাশিত: (2016)
The development of additive technologies for production of ceramic components and parts of a new type by means of selective laser melting; Современные технологии и материалы новых поколений
অনুযায়ী: Kolmakov S. V.
প্রকাশিত: (2017)
অনুযায়ী: Kolmakov S. V.
প্রকাশিত: (2017)
Анализ, моделирование и прогнозирование шероховатости поверхности меди, полученной методом селективного лазерного плавления; Обработка металлов (технология, оборудование, инструменты); № 3 (76)
অনুযায়ী: Сапрыкина Н. А. Наталья Анатольевна
প্রকাশিত: (2017)
অনুযায়ী: Сапрыкина Н. А. Наталья Анатольевна
প্রকাশিত: (2017)
Towards development of personalized implants with antibacterial bioactive coating by the selective laser melting and RF magnetron sputtering methods; Междисциплинарные проблемы аддитивных технологий
প্রকাশিত: (2018)
প্রকাশিত: (2018)
Formation of Structural-Phase State in a Cobalt-Chromium-Molybdenum Alloy by Selective Laser Melting; Solid State Phenomena; Vol. 313
প্রকাশিত: (2021)
প্রকাশিত: (2021)
Computational study of the mechanical behavior of steel produced by selective laser melting; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
প্রকাশিত: (2016)
প্রকাশিত: (2016)
Forming a single layer of a composite powder based on the Ti-Nb system via selective laser melting (SLM); IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
প্রকাশিত: (2016)
প্রকাশিত: (2016)
The Influence of Parameters of Microarc Oxidation on the Surface Roughness and Wettability of Calciumphosphate Coatings; Applied Mechanics and Materials; Vol. 1097 : Nanomaterials and Surface Technologies, Materials Applications
অনুযায়ী: Chebodaeva V. V. Valentina Vadimovna
প্রকাশিত: (2015)
অনুযায়ী: Chebodaeva V. V. Valentina Vadimovna
প্রকাশিত: (2015)
Влияние химического травления на микроструктуру и механические свойства листовых Ti6Al4V структур с топологией трижды периодических поверхностей минимальной энергии, полученных методом электронно-лучевого плавления; Перспективные материалы конструкционного и функционального назначения
প্রকাশিত: (2020)
প্রকাশিত: (2020)
Degradation of alumina particles under selective laser melting conditions; High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes; Vol. 26, iss. 1
অনুযায়ী: Krinitsyn M. G. Maksim Germanovich
প্রকাশিত: (2022)
অনুযায়ী: Krinitsyn M. G. Maksim Germanovich
প্রকাশিত: (2022)
Titanium Surface Roughness Modification Using Ion Beam and Mechanical Method; Surface Modification of Materials by Ion Beams (SMMIB-2019)
প্রকাশিত: (2019)
প্রকাশিত: (2019)
Joule heating effects on quartz particle melting in high-temperature silicate melt; IOP Conference Series: Materials Science and Engineering; Vol. 93: Modern Technique and Technologies (MTT'2015)
প্রকাশিত: (2015)
প্রকাশিত: (2015)
Adhesive contact of rough brushes; Beilstein Journal of Nanotechnology; Vol. 9, iss. 1
অনুযায়ী: Li Qiang
প্রকাশিত: (2018)
অনুযায়ী: Li Qiang
প্রকাশিত: (2018)
Effects of Inert Nanoparticles of High-Melting-Point Compositions on Grain Structure and Strength of Ni[3]Al Intermetallic Compounds; IOP Conference Series: Materials Science and Engineering; Vol. 142 : Innovative Technologies in Engineering
অনুযায়ী: Ovcharenko V. E. Vladimir Efimovich
প্রকাশিত: (2016)
অনুযায়ী: Ovcharenko V. E. Vladimir Efimovich
প্রকাশিত: (2016)
Модификация поверхности 3D напечатанных образцов титанового сплава Ti-6AL-4V путем электронно-пучковой и ультразвуковой ударной обработок; Иерархические материалы: разработка и приложения для новых технологий и надежных конструкций
অনুযায়ী: Синякова Е. А.
প্রকাশিত: (2019)
অনুযায়ী: Синякова Е. А.
প্রকাশিত: (2019)
The effect of layer-by-layer laser sintering on the quality of copper powder sintered surface layer; 11th International Forum on Strategic Technology (IFOST 2016); Pt. 1
অনুযায়ী: Saprykin A. A. Aleksandr Aleksandrovich
প্রকাশিত: (2016)
অনুযায়ী: Saprykin A. A. Aleksandr Aleksandrovich
প্রকাশিত: (2016)
Two-dimensional model of laser alloying of binary alloy powder with interval of melting temperature; AIP Conference Proceedings; Vol. 1893 : High-Energy Processes in Condensed Matter (HEPCM 2017)
অনুযায়ী: Knyazeva A. G. Anna Georgievna
প্রকাশিত: (2017)
অনুযায়ী: Knyazeva A. G. Anna Georgievna
প্রকাশিত: (2017)