Model of layers bonding during LOM-process; Journal of Physics: Conference Series; Vol. 1045 : Rheology and Modeling of Materials

Model of layers bonding during LOM-process; Journal of Physics: Conference Series; Vol. 1045 : Rheology and Modeling of Materials

Dettagli Bibliografici
Parent link:	Journal of Physics: Conference Series Vol. 1045 : Rheology and Modeling of Materials.— 2018.— [012020, p. 5]
Autore principale:	Knyazeva A. G. Anna Georgievna
Ente Autore:	Национальный исследовательский Томский политехнический университет Инженерная школа новых производственных технологий Научно-производственная лаборатория "Моделирование технологических процессов"
Altri autori:	Travitsky (Travitzky) N. Nakhum
Riassunto:	Title screen The model of LOM-process with chemical reaction in intermediate layer is suggested in this paper. Maximal stress in contact zone and half-thickness of contact area are given from contact problem of mechanics. It was shown that this problem is similar to the problem of different material conjugation using synthesis in solid phase. Dimensionless variables and dimensionless criteria are identical for these processes. The qualitative examples of temperature field evolution for self-sustaining mode are demonstrated.
Lingua:	inglese
Pubblicazione:	2018
Soggetti:	электронный ресурс труды учёных ТПУ поверхностные слои склеивание
Accesso online:	https://doi.org/10.1088/1742-6596/1045/1/012020 http://earchive.tpu.ru/handle/11683/57834
Natura:	MixedMaterials Elettronico Capitolo di libro
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=658884

Documenti analoghi

Surface layer evolution under the external heating; Journal of Physics: Conference Series; Vol. 1045 : Rheology and Modeling of Materials
di: Knyazeva A. G. Anna Georgievna
Pubblicazione: (2018)

Model of chemical conversion initiation in the adhesive bonding layer during roll motion in the process of laminated object creation; Nanoscience and Technology: An International Journal; Vol. 9, iss. 1
di: Knyazeva A. G. Anna Georgievna
Pubblicazione: (2018)

Thermal physical model of composite creation in LOM technology; Междисциплинарные проблемы аддитивных технологий
di: Knyazeva A. G. Anna Georgievna
Pubblicazione: (2018)

Numerical Investigation of Physicochemical Processes Occurring During Water Evaporation in the Surface Layer Pores of a Forest Combustible Material; Journal of Engineering Physics and Thermophysics; Vol. 87, iss. 4
di: Zhdanova A. O. Alena Olegovna
Pubblicazione: (2014)

Energy of the Surface Layer Deterioration of 1020 Steel and Copper at Dry Sliding against 1045 Steel with a High Electric Current Density; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
di: Fadin V. V.
Pubblicazione: (2016)

Process Conditions of Forming the Surface Layer of Aluminum Powder Product by Layer-by-layer Laser Sintering; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
Pubblicazione: (2016)

Modelling of powder consolidation using electro heating assisted by mechanical loading; Journal of Physics: Conference Series; Vol. 790, iss. 1 : Rheology and Modeling of Materials (IC-RMM2)
di: Knyazeva A. G. Anna Georgievna
Pubblicazione: (2017)

Influence of Layer Laser Sintering on Quality of Surface Layer Sintered Aluminum Powder PA-4; Applied Mechanics and Materials; Vol. 770 : Urgent Problems of Up-to-Date Mechanical Engineering
di: Saprykina N. A. Natalia Anatolyevna
Pubblicazione: (2015)

The Structure and Phase Composition of the Surface Layer of the Samples during the Processing of VT-10 Titanium Alloys by Copper Ions; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Pubblicazione: (2016)

Evaporation Rate of a Liquid Layer Streamlined by Gas Flow in Minichannel; MATEC Web of Conferences; Vol. 91 : Smart Grids 2017
di: Orlova E. G. Evgeniya Georgievna
Pubblicazione: (2017)

Influence of Layer-by-Layer Laser Sintering Modes on the Roughness and Thickness of Sintered Layer of Copper Powder; Applied Mechanics and Materials; Vol. 756 : Mechanical Engineering, Automation and Control Systems (MEACS2014)
di: Saprykina N. A. Natalia Anatolyevna
Pubblicazione: (2015)

Influence of layer-by-layer laser sintering conditions on the quality of sintered surface layer of products; IOP Conference Series: Materials Science and Engineering; Vol. 91: VI International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, Yurga, Russia, 21-23 May 2015
Pubblicazione: (2015)

Extended lead(II) architectures engineered via tetrel bonding interactions; New Journal of Chemistry; Vol. 42, iss. 7
Pubblicazione: (2018)

Aluminum surface layer strengthening using intense pulsedbeam radiation of substrate film system; IOP Conference Series: Materials Science and Engineering; Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science
Pubblicazione: (2016)

Air Processes Resulting in a Surface Layer Pollution in Industrial Regions; IOP Conference Series: Materials Science and Engineering; Vol. 142 : Innovative Technologies in Engineering
di: Lesin Yu. V. Yury Vasilievich
Pubblicazione: (2016)

The nonisothermal model of the initial stage of ion implantation process; Nanoparticles, nanostructured coatings and microcontainers: technology, properties, applications
di: Parfenova E. S. Elena Sergeevna
Pubblicazione: (2016)

Технология склеивания металлов
di: Михалев И. И. Иван Иванович
Pubblicazione: (Москва, Машиностроение, 1965)

Mathematical Model of Three-Layer Composite Synthesis during Hot Isostatic Pressing; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
di: Knyazeva A. G. Anna Georgievna
Pubblicazione: (2016)

The electrical conductivity of the surface layers of oxide polycrystalline semiconductors irradiated by accelerated ions; IOP Conference Series: Materials Science and Engineering; Vol. 81 : Radiation-Thermal Effects and Processes in Inorganic Materials
di: Frangulyan (Franguljyan) Т. S. Tamara Semenovna
Pubblicazione: (2015)

Kinetics of Structural Transformation in an Adhesive Layer during Creation of 3D Objects in LOM Technology; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
di: Saifullin E. Elmir
Pubblicazione: (2019)

Numerical Modeling of Thermal Processes while Depositing Layers in Additive Production; Materials Science Forum; Vol. 938 : Materials and Technologies in Mechanical Engineering
Pubblicazione: (2018)

Mathematical model of three-layer composite synthesis during hot isostatic pressing; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
di: Knyazeva A. G. Anna Georgievna
Pubblicazione: (2016)

Two-phase model of thermal decomposition of shale stratum; European Physical Journal Web of Conferences (EPJ Web of Conferences); Vol. 82 : Thermophysical Basis of Energy Technologies
di: Knyazeva A. G. Anna Georgievna
Pubblicazione: (2015)

Mathematical Model of Motion of Modifying Powder Particles in the Shielding (Carrier) Gas; IOP Conference Series: Materials Science and Engineering; Vol. 125 : Materials Treatment: Current Problems and Solutions
Pubblicazione: (2016)

Structure and Phase Evolution in a SiC Ceramic Surface Layer During Electron-Beam Treatment; Refractories and Industrial Ceramics; Vol. 59, iss. 3
Pubblicazione: (2018)

Effect of Initial Microtopography and Ultrasonic Treatment Mode on Steel Surface Layer Quality; IOP Conference Series: Materials Science and Engineering; Vol. 125 : Materials Treatment: Current Problems and Solutions
di: Zaitsev K. V. Konstantin Viktorovich
Pubblicazione: (2016)

Structure Fragmentation of a Surface Layer of Commercial Purity Titanium During Ultrasonic Impact Treatment; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Pubblicazione: (2015)

Investigation of Surface Layers of Aluminum Alloy after Superplastic Deformation; Advanced Materials Research : Advanced materials, synthesis, development and application; Vol. 880 : Prospects of Fundamental Sciences Development (PFSD-2013)
di: Naydenkin E. V.
Pubblicazione: (2014)

Structure of Austenitic Steel Surface Layer Subjected to Compression Plasma Flows Impact; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Pubblicazione: (2019)

Surface layer structure of AISI 1020 steel at different stages of dry sliding under electric current of high density; IOP Conference Series: Materials Science and Engineering; Vol. 116 : Advanced Materials and New Technologies in Modern Materials Science
Pubblicazione: (2016)

The Development of Self-Expanding Peripheral Stent with Ion-Modified Surface Layer; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Pubblicazione: (2016)

Effect of High Intensity Pulsed Ion Beam of Carbon on Subsurface Layers of Zirconia Ceramics; Advanced Materials Research; Vol. 1085 : Prospects of Fundamental Sciences Development (PFSD-2014)
Pubblicazione: (2015)

Pulsed Ion Beam Induced Changes in a Topography of the Surface Layers of Titanium; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Pubblicazione: (2019)

Microconstituents of the Modified Surface Layer of Austenitic Steel With Nanofibres of Aluminium Oxyhydroxide; IOP Conference Series: Materials Science and Engineering; Vol. 142 : Innovative Technologies in Engineering
Pubblicazione: (2016)

Structure, Mechanical Properties and Corrosion Resistance of Stainless Steel Surface Layers Faced Using Ultradisperse Powders of Inorganic Materials; Procedia Engineering; Vol. 206 : International Conference on Industrial Engineering (ICIE 2017)
di: Kuznetsov M. A. Maksim Aleksandrovich
Pubblicazione: (2017)

Structure and Bonding; V. 57 : Complex Chemistry
Pubblicazione: (Berlin, Springer-Verlag, 1984)

Evolution of Stress Concentration along CurvilinearModified Surface Layer-Base Material Interface. Numerical Simulation; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Pubblicazione: (2015)

Structural Phase Transformations of the Surface Layer of SiC Ceramics Irradiated by Intense Electron Beam; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Pubblicazione: (2016)

Pneumatic device of the preload and dynamic loads balancing to reduce the intensity of thermal processes in the metal cutting process; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Pubblicazione: (2017)

Formation of high-carbon abrasion-resistant surface layers when high-energy heating by high-frequency currents; IOP Conference Series: Materials Science and Engineering; Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science
Pubblicazione: (2016)