Dynamics of Surface Heating and Quenching of Titanium by a Submillisecond Intense Electron Beam

Dynamics of Surface Heating and Quenching of Titanium by a Submillisecond Intense Electron Beam

Bibliographic Details
Parent link:	Key Engineering Materials: Scientific Journal Vol. 781 : Radiation-Thermal Effects and Processes in Inorganic Materials.— 2018.— [P. 82-87]
Corporate Author:	Национальный исследовательский Томский политехнический университет Инженерная школа информационных технологий и робототехники Отделение информационных технологий
Other Authors:	Teresov A. D. Anton, Koval T. V. Tamara Vasilievna, Moskvin P. Pavel, Chan Mi Kim An, Koval N. N. Nikolay Nikolaevich
Summary:	Title screen The paper presents measurements taken with a high-speed infrared pyrometer for the surface temperature of VT1-0 titanium alloy during pulsed electron beam irradiation at different pulse energy densities. Also presented are numerical simulation data on thermal fields for the same conditions, showing a good agreement with the measurements. The results demonstrate that the heating rate of the VT1-0 surface depends on the main beam parameters, and its solidification occurs at a temperature ≈ 280 °C lower than the melting point. Режим доступа: по договору с организацией-держателем ресурса
Published:	2018
Subjects:	электронный ресурс труды учёных ТПУ high-speed infrared pyrometer numerical simulation pulsed electron beam VT1-0 titanium alloy численное моделирование импульсные пучки титановые сплавы пирометры нагрев электронные пучки тушение
Online Access:	https://doi.org/10.4028/www.scientific.net/KEM.781.82
Format:	Electronic Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=658794

Similar Items

High-Speed Surface Temperature Measurement in TiCoated Aluminum During Electron Beam Irradiation
Published: (2018)

Concentration-Dependent Transformation Plasticity Effect During Hydrogenation of Technically Pure Titanium Irradiated with an Electron Beam
by: Perevalova O. B. Olga Borisovna
Published: (2019)

Effect of High-Power Ion Beams on the Surface Topography and Structure of the Subsurface Layer of Submicrocrystalline Titanium Alloys
Published: (2019)

High-intensity ion beams with submillisecond duration for synergistic of ion implantation and energy impact on the surface
Published: (2022)

Regular Features of Stage Formation in the Stress-strain Curves and Microstructure in the Zone of Fracture of Coarse-Grained and Ultrafine-Grained Titanium and Zirconium Alloys
Published: (2019)

Microstructure and Phase Composition of VT1-0, VT6, and VT14 Titanium Alloys Produced by Wire-Feed Electron-Beam Additive Manufacturing
Published: (2022)

Особенности формирования сварного шва при имитации электронно-лучевой сварки толстостенных образцов ВТ6, полученных электронно-лучевой аддитивной
by: Яхин А. Альберт
Published: (2025)

Regularities of Plasma-Immersion Formation of Long-Pulse High-Intensity Titanium Ion Beams
Published: (2018)

Titanium Surface Roughness Modification Using Ion Beam and Mechanical Method
Published: (2019)

Модификация микроструктуры в процессе ультразвуковой ударной электроискровой обработки сварных швов образцов ВТ6, полученных прокаткой и электронно-лучевой аддитивной технологией
by: Яхин А. Альберт
Published: (2025)

Surface Modification of the EBM Ti-6Al-4V Alloy by Pulsed Ion Beam
Published: (2021)

Study on thermal shock irradiation resistance of CoCrFeMnNi high entropy alloy by high intensity pulsed ion beam
Published: (2022)

Investigation of High-Intensity Implantation of Titanium Ions into Silicon under Conditions of Beam Energy Impact on the Surface
Published: (2024)

The Effect of Irradiation of a Titanium Alloy of the Ti–6Al–4V–Н System with Pulsed Electron Beams on Its Creep
Published: (2020)

Special Aspects of High-Intensity Low-Energy Ion Implantation
Published: (2021)

Pulsed ion beam induced changes in a topography of the surface layers of VT1-0 and VT6 titanium alloy
Published: (2016)

Grain-boundary diffusion of titanium in Zr-1 wt.%Nb alloy under irradiation with a pulsed electron beam
Published: (2024)

Mixing in TI/STEEL system under High-intensity pulsed ion beam impact
Published: (2022)

Changing Mechanisms of High-Temperature Oxidation of Zr-1%Nb Alloy in Air and Steam by Surface Modification with Charged Particles
Published: (2025)

Modification of the structure of surface layers of commercial titanium in the process of treatment by low-energy high-current electron beams
Published: (2016)

Investigation of the Features of High-Intensity Implantation of Nitrogen Ions into Titanium
Published: (2023)

DIN 1.7035 Steel Modification with High Intensity Nitrogen Ion Implantation
Published: (2018)

Formation of the structure and properties of the near-surface layer in alloys of the Ti–6Al–4V–H system under irradiation with a pulsed electron beam
Published: (2023)

Structure and phase composition of tungsten alloys modified by compression plasma flows and high-intense pulsed ion beam impacts
Published: (2019)

Surface Modification of ZrO[2] -3Y[2]O[3] Ceramics with High-Intensity Pulsed N{2+} Ion Beams
Published: (2019)

Submicrosecond electron accelerator based on pulsed transformer
Published: (2020)

Modification of the WC-Co carbide surface with high-intensity pulsed ion beam
Published: (2020)

Formation of nanoscale carbon structures in the surface layer of metals under the impact of high intensity ion beam
Published: (2014)

Craters on the Surface Metal After HPIB of Carbon Ions
by: Potemkin G. V. Gely Valerjyanovich
Published: (2019)

Study on the damage of Zr63.5Cu23Al9Fe4.5 amorphous and crystalline alloys irradiated by high intensity pulsed ion beam
Published: (2022)

Study of the Structure of Crater at the Surface of 12Cr18Ni10Ti Steel Irradiated by High-Power Pulsed Ion Beam
Published: (2018)

Modification of silicon under synergy of high-intensity implantation of titanium ions and energy influence of a high-power ion beam on a surface
Published: (2024)

The Effect of Heat Treatment on the Microstructure and Phase Composition of Wrought and 3D-Printed Ti–5Al–3Mo–1V Titanium Alloy Samples
Published: (2023)

Structure and Properties of Silumin Surface after Vacuum Arc Plasma-Assisted Deposition of Coatings Irradiated by Low Energy High Current Pulsed Electron Beam
Published: (2020)

Focusing of intense pulsed ion beam by magnetically insulated diode for material research
Published: (2020)

Study on the damage of Fe80B13Si7 alloy with different structure by high-intensity pulsed ion beam irradiation
Published: (2020)

Combined Method of Cutting Tool Treatment
by: Tarbokov V. A. Vladislav Aleksandrovich
Published: (2019)

Analysis for Hydrogen Concentration in Titanium Alloys Using Multifrequency Eddy Current
Published: (2021)

Energy spectrum analysis for intense pulsed electron beam
Published: (2016)

Effect of the residual atmosphere pressure on collective acceleration of ions in the Luce diode
Published: (2021)