Detecting transition to chatter mode in peakless tool turning by monitoring vibration and acoustic emission signals
| Parent link: | International Journal of Advanced Manufacturing Technology Vol. 95, iss. 1-4.— 2018.— [P. 157-169] |
|---|---|
| Corporate Authors: | , |
| Other Authors: | , , , , |
| Summary: | Title screen Stability of a peakless tool turning on slender shafts was studied under conditions of low- and high-magnitude vibrations by registering and short-time Fourier transformation (STFT) processing of acoustic emission (AE) and vibration acceleration (VA) signals. Both VA and AE signals have been registered in three positions of the cutting tool on the workpiece and for different shaft diameters. Both amplitudeand frequency-dependent AE and VA characteristics were obtained and analyzed for overall process signal length as well as for single frames. It was shown that power spectrum characteristic could be used for monitoring the fast-occurring changes in the cutting process stability. A criterion of the cutting process stability based on the power spectrum has been offered. Режим доступа: по договору с организацией-держателем ресурса |
| Language: | English |
| Published: |
2018
|
| Subjects: | |
| Online Access: | https://doi.org/10.1007/s00170-017-1188-y |
| Format: | Electronic Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=657992 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 657992 | ||
| 005 | 20250124162248.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\24971 | ||
| 035 | |a RU\TPU\network\24905 | ||
| 090 | |a 657992 | ||
| 100 | |a 20180425d2018 k||y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 102 | |a US | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Detecting transition to chatter mode in peakless tool turning by monitoring vibration and acoustic emission signals |f A. V. Filippov [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: p. 168-169 (15 tit.)] | ||
| 330 | |a Stability of a peakless tool turning on slender shafts was studied under conditions of low- and high-magnitude vibrations by registering and short-time Fourier transformation (STFT) processing of acoustic emission (AE) and vibration acceleration (VA) signals. Both VA and AE signals have been registered in three positions of the cutting tool on the workpiece and for different shaft diameters. Both amplitudeand frequency-dependent AE and VA characteristics were obtained and analyzed for overall process signal length as well as for single frames. It was shown that power spectrum characteristic could be used for monitoring the fast-occurring changes in the cutting process stability. A criterion of the cutting process stability based on the power spectrum has been offered. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | |t International Journal of Advanced Manufacturing Technology | ||
| 463 | |t Vol. 95, iss. 1-4 |v [P. 157-169] |d 2018 | ||
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a vibrations | |
| 610 | 1 | |a precision | |
| 610 | 1 | |a acoustic emission | |
| 610 | 1 | |a точность | |
| 610 | 1 | |a акустическая эмиссия | |
| 610 | 1 | |a вибрация | |
| 701 | 1 | |a Filippov |b A. V. |c specialist in the field of mechanical engineering |c assistant of Yurga technological Institute of Tomsk Polytechnic University |f 1988- |g Andrey Vladimirovich |3 (RuTPU)RU\TPU\pers\34612 |9 17974 | |
| 701 | 1 | |a Rubtsov |b V. E. |g Valery Evgenjevich | |
| 701 | 1 | |a Tarasov |b S. Yu. |c specialist in the field of mechanical engineering |c Professor of Tomsk Polytechnic University, Doctor of technical sciences |f 1959- |g Sergei Yulievich |3 (RuTPU)RU\TPU\pers\31400 |9 15572 | |
| 701 | 1 | |a Podgornykh |b O. A. |c specialist in the field of mechanical engineering |c head of laboratory of Tomsk Polytechnic University |f 1986- |g Oleg Anatolievich |3 (RuTPU)RU\TPU\pers\37380 | |
| 701 | 1 | |a Shamarin |b N. N. |c specialist in the field of mechanical engineering |c educational master of Yurga technological Institute of Tomsk Polytechnic University |f 1989- |g Nikolay Nikolaevich |3 (RuTPU)RU\TPU\pers\37381 |9 20299 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Юргинский технологический институт (филиал) (ЮТИ) |b Кафедра технологии машиностроения (ТМС) |3 (RuTPU)RU\TPU\col\18902 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа новых производственных технологий |b Отделение материаловедения |3 (RuTPU)RU\TPU\col\23508 |
| 801 | 2 | |a RU |b 63413507 |c 20180425 |g RCR | |
| 856 | 4 | |u https://doi.org/10.1007/s00170-017-1188-y | |
| 942 | |c CF | ||