Structure and properties of steel produced by metal injection molding
| Parent link: | Inorganic Materials: Applied Research.— , 2010- Vol. 8, iss. 2.— 2017.— [P. 331–334] |
|---|---|
| अन्य लेखक: | , , , , |
| सारांश: | Title screen Austenite stainless steel produced by metal injection molding (MIM process) is studied, including its structure, phase composition, and mechanical properties of initial feedstock and sintered material. Prepared feedstock consists of cylindrical granules with the diameter of approximately 3.5 mm. The main feedstock material is a mixture of chrome-nickel and steel powders. Polyacetal is used as a plastic binder. Upon sintering of the feedstock, the material is synthesized with chemical composition, structure, and mechanical properties similar to those of austenite stainless steels. The material density after sintering is higher than 98% of theoretical value. It is established that, upon sintering, a phase transformation occurs: the initial ferrite phase is transformed into the austenite phase. The phase transformation is promoted by nickel contained in initial powder mixture. The microhardness of the sintered material is 1.6 GPa; the elastic modulus is 115 GPa. Режим доступа: по договору с организацией-держателем ресурса |
| भाषा: | अंग्रेज़ी |
| प्रकाशित: |
2017
|
| विषय: | |
| ऑनलाइन पहुंच: | https://doi.org/10.1134/S2075113317020162 |
| स्वरूप: | इलेक्ट्रोनिक पुस्तक अध्याय |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=657786 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 657786 | ||
| 005 | 20250123120342.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\24544 | ||
| 090 | |a 657786 | ||
| 100 | |a 20180320d2017 k||y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 102 | |a US | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Structure and properties of steel produced by metal injection molding |f Yu. V. Myachin [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: p. 334 (6 tit.)] | ||
| 330 | |a Austenite stainless steel produced by metal injection molding (MIM process) is studied, including its structure, phase composition, and mechanical properties of initial feedstock and sintered material. Prepared feedstock consists of cylindrical granules with the diameter of approximately 3.5 mm. The main feedstock material is a mixture of chrome-nickel and steel powders. Polyacetal is used as a plastic binder. Upon sintering of the feedstock, the material is synthesized with chemical composition, structure, and mechanical properties similar to those of austenite stainless steels. The material density after sintering is higher than 98% of theoretical value. It is established that, upon sintering, a phase transformation occurs: the initial ferrite phase is transformed into the austenite phase. The phase transformation is promoted by nickel contained in initial powder mixture. The microhardness of the sintered material is 1.6 GPa; the elastic modulus is 115 GPa. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | |t Inorganic Materials: Applied Research |d 2010- | ||
| 463 | |t Vol. 8, iss. 2 |v [P. 331–334] |d 2017 | ||
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a нержавеющая сталь | |
| 610 | 1 | |a спекание | |
| 610 | 1 | |a фазовое превращение | |
| 701 | 1 | |a Myachin |b Yu. V. |c specialist in the field of material science |c assistant of the Department of Tomsk Polytechnic University |f 1976- |g Yury Vladimirovich |3 (RuTPU)RU\TPU\pers\38453 |9 20780 | |
| 701 | 1 | |a Darenskaya |b E. A. |c specialist in the field of material science |c Associate Professor of Tomsk Polytechnic University, Candidate of technical sciences |c maiden name Ivanova |f 1982- |g Elena Anatolievna |3 (RuTPU)RU\TPU\pers\33040 |9 16874 | |
| 701 | 1 | |a Vaulina |b O. Yu. |c specialist in the field of materials science |c Associate Professor of Tomsk Polytechnic University, Candidate of technical sciences |f 1978- |g Olga Yurievna |3 (RuTPU)RU\TPU\pers\36293 |9 19367 | |
| 701 | 1 | |a Buyakova |b S. P. |c specialist in the field of material science |c Professor of Tomsk Polytechnic University, Doctor of technical sciences |f 1968- |g Svetlana Petrovna |3 (RuTPU)RU\TPU\pers\34758 |9 18108 | |
| 701 | 1 | |a Turuntaev |b I. V. |g Igor Vladimirovich | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа новых производственных технологий |b Отделение материаловедения |3 (RuTPU)RU\TPU\col\23508 |
| 801 | 2 | |a RU |b 63413507 |c 20180320 |g RCR | |
| 856 | 4 | |u https://doi.org/10.1134/S2075113317020162 | |
| 942 | |c CF | ||