Experimental and numerical study of coal dust ignition by a hot particle; Applied Thermal Engineering; Vol. 133
| Parent link: | Applied Thermal Engineering Vol. 133.— 2017.— [P. 774-784] |
|---|---|
| Main Author: | |
| Corporate Authors: | , |
| Other Authors: | , |
| Summary: | Title screen This work studies the ignition of a layer of brown coal dust by hot metal particles experimentally and numerically. The experiments establish the limits of the flaming ignition of gas and ignition delay times when the parameters of solid fuel and metal particles varied in a wide range. The particle size of coal ranged from 0.1 to 1?mm; the shapes of the metal particles were sphere, disk, and cube; their initial temperature varied between 1000 and 1400?K. A mathematical model was developed for describing the processes involved in heat and mass transfer as well as chemical reactions around the local heat source. The results of the numerical simulation are in good agreement with the experimental data: boundaries of the flaming ignition of coal; coal ignition delay times; three modes of flaming ignition of coal with the ignition zone of volatiles located in the vicinity of the hot particle. The mathematical model is good at predicting the ignition conditions during interaction between a hot metal particle and a layer of coal dust. The model can also be used for developing the promising technology of steam boiler start-up by highly reactive coal instead of flammable liquid combustion. Another application is the development of fire prevention guidelines for tightening fire safety management at productions deal with coal mining, transportation, storage, processing, and combustion. Finally, the paper includes the analysis of limitations for the practical use of the predictive mathematical model in thermal power engineering and fire safety management. Режим доступа: по договору с организацией-держателем ресурса |
| Language: | English |
| Published: |
2017
|
| Subjects: | |
| Online Access: | https://doi.org/10.1016/j.applthermaleng.2018.01.049 |
| Format: | Electronic Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=657618 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 657618 | ||
| 005 | 20250122170809.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\24196 | ||
| 090 | |a 657618 | ||
| 100 | |a 20180227d2018 k||y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Experimental and numerical study of coal dust ignition by a hot particle |f D. O. Glushkov, G. V. Kuznetsov, P. A. Strizhak | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 42 tit.] | ||
| 330 | |a This work studies the ignition of a layer of brown coal dust by hot metal particles experimentally and numerically. The experiments establish the limits of the flaming ignition of gas and ignition delay times when the parameters of solid fuel and metal particles varied in a wide range. The particle size of coal ranged from 0.1 to 1?mm; the shapes of the metal particles were sphere, disk, and cube; their initial temperature varied between 1000 and 1400?K. A mathematical model was developed for describing the processes involved in heat and mass transfer as well as chemical reactions around the local heat source. The results of the numerical simulation are in good agreement with the experimental data: boundaries of the flaming ignition of coal; coal ignition delay times; three modes of flaming ignition of coal with the ignition zone of volatiles located in the vicinity of the hot particle. The mathematical model is good at predicting the ignition conditions during interaction between a hot metal particle and a layer of coal dust. The model can also be used for developing the promising technology of steam boiler start-up by highly reactive coal instead of flammable liquid combustion. Another application is the development of fire prevention guidelines for tightening fire safety management at productions deal with coal mining, transportation, storage, processing, and combustion. Finally, the paper includes the analysis of limitations for the practical use of the predictive mathematical model in thermal power engineering and fire safety management. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | |t Applied Thermal Engineering | ||
| 463 | |t Vol. 133 |v [P. 774-784] |d 2017 | ||
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a зажигание | |
| 610 | 1 | |a угольная пыль | |
| 610 | 1 | |a горячие частицы | |
| 610 | 1 | |a математическая модель | |
| 700 | 1 | |a Glushkov |b D. O. |c specialist in the field of power engineering |c Professor, Director of the ISHFVP of the Tomsk Polytechnic University, Doctor of Technical Sciences |f 1988- |g Dmitry Olegovich |3 (RuTPU)RU\TPU\pers\32471 |9 16419 | |
| 701 | 1 | |a Kuznetsov |b G. V. |c Specialist in the field of heat power energy |c Professor of Tomsk Polytechnic University, Doctor of Physical and Mathematical Sciences |f 1949- |g Geny Vladimirovich |3 (RuTPU)RU\TPU\pers\31891 |9 15963 | |
| 701 | 1 | |a Strizhak |b P. A. |c Specialist in the field of heat power energy |c Doctor of Physical and Mathematical Sciences (DSc), Professor of Tomsk Polytechnic University (TPU) |f 1985- |g Pavel Alexandrovich |3 (RuTPU)RU\TPU\pers\30871 |9 15117 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Энергетический институт (ЭНИН) |b Кафедра теоретической и промышленной теплотехники (ТПТ) |3 (RuTPU)RU\TPU\col\18679 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Исследовательская школа физики высокоэнергетических процессов |c (2017- ) |3 (RuTPU)RU\TPU\col\23551 |
| 801 | 2 | |a RU |b 63413507 |c 20180227 |g RCR | |
| 856 | 4 | |u https://doi.org/10.1016/j.applthermaleng.2018.01.049 | |
| 942 | |c CF | ||