Нанесение плазменных TI-C-N покрытий на воздухе
| Parent link: | Физика и химия обработки материалов: научный журнал.— , 1967- № 3.— 2017.— [С. 33-37] |
|---|---|
| Автор: | |
| Співавтор: | |
| Інші автори: | |
| Резюме: | Заглавие с экрана Показана возможность получения сверхтвердого покрытия на основе титана, азота и углерода на металлической подложке методом плазменного осаждения на воздухе. Покрытие наносилось на подложку в кратковременном цикле работы магнитоплазменном ускорителя при воздействии гиперскоростной струи электроэрозионной титаносодержащей плазмы. Методами сканирующей электронной микроскопии и рентгенофазового анализа установлено, что высокая твердость полученных покрытий обусловлена формированием наноструктурных слоев нитрида и карбонитрида титана. Possibility of production of Ti-, N-, and C-containing superhard coatings on a metal substrate by plasma-dynamic method in air has been studied. The coating is deposited in time of one short operation cycle of magneto-plasma accelerator under the impact of a high speed electric discharge Ti-containing plasma jet on the substrate surface. Formation of TiN and TiCN nanostructured layers in the coating structure is ascertained with the help of SEM and X-ray difraction methods and it leads to the coating hardness increasing. Formation of gradient layer of mixed material at coating/substrate interface is found to be occurred under the action of high-enthalpy plasma jet on a metal substrate. The value of hardness is not constant throughout the coating thickness and ultra-high nanohardness values >20 GPa were obtained for the subsurface layer and substrate/coating interface region. Mean value of hardness of coating is 16.2 GPa. The coating produced has a good adhesion with the substrate. Режим доступа: по договору с организацией-держателем ресурса |
| Мова: | Російська |
| Опубліковано: |
2017
|
| Серія: | Функциональные покрытия и обработка поверхности |
| Предмети: | |
| Онлайн доступ: | https://elibrary.ru/item.asp?id=29328013 |
| Формат: | Електронний ресурс Частина з книги |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=657222 |
| Резюме: | Заглавие с экрана Показана возможность получения сверхтвердого покрытия на основе титана, азота и углерода на металлической подложке методом плазменного осаждения на воздухе. Покрытие наносилось на подложку в кратковременном цикле работы магнитоплазменном ускорителя при воздействии гиперскоростной струи электроэрозионной титаносодержащей плазмы. Методами сканирующей электронной микроскопии и рентгенофазового анализа установлено, что высокая твердость полученных покрытий обусловлена формированием наноструктурных слоев нитрида и карбонитрида титана. Possibility of production of Ti-, N-, and C-containing superhard coatings on a metal substrate by plasma-dynamic method in air has been studied. The coating is deposited in time of one short operation cycle of magneto-plasma accelerator under the impact of a high speed electric discharge Ti-containing plasma jet on the substrate surface. Formation of TiN and TiCN nanostructured layers in the coating structure is ascertained with the help of SEM and X-ray difraction methods and it leads to the coating hardness increasing. Formation of gradient layer of mixed material at coating/substrate interface is found to be occurred under the action of high-enthalpy plasma jet on a metal substrate. The value of hardness is not constant throughout the coating thickness and ultra-high nanohardness values >20 GPa were obtained for the subsurface layer and substrate/coating interface region. Mean value of hardness of coating is 16.2 GPa. The coating produced has a good adhesion with the substrate. Режим доступа: по договору с организацией-держателем ресурса |
|---|