Structure Changes in the Surface Layers of Ti-6Al-4V Titanium Alloy under Electron Beam Treatment; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)

Structure Changes in the Surface Layers of Ti-6Al-4V Titanium Alloy under Electron Beam Treatment; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)

Détails bibliographiques
Parent link:	AIP Conference Proceedings Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17).— 2017.— [020198, 4 p.]
Collectivité auteur:	Национальный исследовательский Томский политехнический университет
Autres auteurs:	Sinyakova E. Elena, Panin A. V. Alexey Viktorovich, Perevalova O. Olga, Kazachenok M. Marina, Ivanov Yu. Yurii, Kalashnikov M. P. Mark Petrovich
Résumé:	Title screen Optical, atomic force, transmission electron microscopy and X-ray diffraction analysis were used to study the effect of electron beam treatment on surface morphology and the structure of Ti-6Al-4V titanium alloy. It is shown that a multilayer structure of lamellar [alpha]-phase, nanosized [alpha]-phase and intermetallic [alpha][2]-phase are formed in Ti-6Al-4V specimens as a result of electron beam radiation. The redistribution of alloying elements in surface layers of specimens was revealed through energy-dispersive X-ray spectroscopy. Режим доступа: по договору с организацией-держателем ресурса
Langue:	anglais
Publié:	2017
Sujets:	электронный ресурс труды учёных ТПУ структурные изменения поверхностные слои титановые сплавы электронно-лучевая обработка аморфные металлы электронные лучи рентгеновская спектроскопия электронная микроскопия рентгеновские излучения amorphous metals electron beams energy dispersive X-ray spectroscopy transmission electron microscopy X-ray diffraction
Accès en ligne:	https://doi.org/10.1063/1.5013879
Format:	Électronique Chapitre de livre
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=657176

Documents similaires

Effect of Conditions of the Pulsed Plasma-chemical Synthesis on Physicochemical Properties of the CuxOy/TiO2 Nanocomposite; Current Nanomaterials; Vol. 7, iss. 3
Publié: (2022)

Analysis of Thermal-Induced Microstructural Changes in Nanoscale Zr/Nb Metal Layers after Proton Irradiation; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18
Publié: (2024)

The Effect of Heat Treatment on the Microstructure and Phase Composition of Wrought and 3D-Printed Ti–5Al–3Mo–1V Titanium Alloy Samples; Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques; Vol. 17, Suppl. 1
Publié: (2023)

Effect of Irradiation with a Pulsed Electron Beam on the Defect Structure Formation and the Properties of the Surface Layer of Zr–Nb–H System Alloys; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 17
Publié: (2023)

Effect of Ultrasonic Impact Treatment on Structural Phase Transformations in Ti-6Al-4V Titanium Alloy; Physical Mesomechanics; Vol. 25, iss. 3
Publié: (2022)

Effect of Annealing on the Microstructure and Structural-Phase State of Nanoscale Multilayer Zr/Nb Coatings after Irradiation with He+ Ions; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 6
Publié: (2024)

The Phase Transitions Behavior during Hydrogenation and Defect Structure Investigation in an E110 Zirconium Alloy with a Hydride Rim; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 17
Publié: (2024)

Fabrication of customizable wedged multilayer Laue lenses by adding a stress layer; Thin Solid Films; Vol. 571, pt. 2
Publié: (2015)

Change in the Phase Composition and Lattice Parameters of the Solid Solution Based on a-Ti in the Surface Layers of the Ti–6Al–4V Alloy Subjected to Electron-Beam Treatment; Physics of Metals and Metallography; Vol. 121, iss. 2
par: Perevalova O. B. Olga Borisovna
Publié: (2020)

Effect of Surface Electropulsing Assisted Ultrasonic Impact Treatment on the Microstructure, Phase Composition, and Microhardness of 3D Printed Ti-6Al-4V Alloy; Physics of Metals and Metallography; Vol. 122, iss. 7
par: Perevalova O. B. Olga Borisovna
Publié: (2021)

Effect of ion treatment on the structure and properties of ceramic materials (review); Ceramics International; Vol. 49, Iss. 23, Part A,
par: Gyngazov (Ghyngazov) S. A. Sergey Anatolievich
Publié: (2023)

Structure Formation of 5083 Alloy during Friction Stir Welding; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publié: (2017)

The Effect of Electropulsing-Assisted Ultrasonic Impact Treatment on the Microstructure, Phase Composition, and Microhardness of Electron-Beam-Welded 3D Printed Ti-6Al-4V Alloy; Physics of Metals and Metallography; Vol. 123, iss. 9
Publié: (2022)

The Effect of Electron Beam Welding on the Microstructure and Microhardness of 3D-Printed Products from Titanium Alloy Ti-6Al-4V; Physics of Metals and Metallography; Vol. 122, iss. 2
Publié: (2021)

Microstructure and Deformation Behavior of Novel Metal–Ceramic Laminated Composites Ta/Ti3Al(Si)C2–TiC; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18
Publié: (2024)

Structural, mechanical, and tribological properties of CrCN coatings obtained by cathodic arc physical vapour deposition technology at different CH4/N2 gas ratio; Thin Solid Films; Vol. 766
Publié: (2023)

Effect of Surface Modification of a Titanium Alloy by Copper Ions on the Structure and Properties of the Substrate-Coating Composition; Metals; Vol. 10, iss. 12
Publié: (2020)

Complex Assessment of X-ray Diffraction in Crystals with Face-Centered Silicon Carbide Lattice; Crystals; Vol. 13, iss. 3
Publié: (2023)

Structure and Properties of Parts Produced by Electron-Beam Additive Manufacturing; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publié: (2017)

Vacuum-free electric arc method for synthesis of lanthanum hexaboride; Ceramics International; Vol. 51, iss. 26, pt. A
Publié: (2025)

The High-Temperature In Situ Synchrotron Study of the Structural-Phase Transformations in 3D-Printed Ti–6Al–4V and Ti–5Al–3Mo–V Titanium Alloys; Physics of Metals and Metallography; Vol. 125, iss. 9
Publié: (2024)

Bis(benzotriazol-1-yl)methane as a linker in the assembly of new copper(II) coordination polymers: Synthesis, structure and investigations; Polyhedron; Vol. 48, iss. 1
Publié: (2012)

Structural-phase state and mechanical properties of submicrocrystalline titanium alloy Ti-6Al-4V obtained with use of reversible hydrogen alloying; Bulletin of the Tomsk Polytechnic University; Vol. 311, № 2
par: Grabovetskaya G. P. Galina Petrovna
Publié: (2007)

Получение углеродных графитоподобных наноматериалов при переработке отходов на основе асфальтенов; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 333, № 12
Publié: (2022)

Monochromatic X-ray sources based on a mechanism of real and virtual photon diffraction in crystals; Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms; Vol. 266, iss. 17
Publié: (2008)

Structural-Phase State and Morphology of a Composite Based on Magnesium Hydride and Magnesium Oxide Fabricated by Electric Arc Sputtering; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18
Publié: (2024)

Effect of surface modification by a high-current electron beam on the kinetics of the structure of hydride phases in titanium; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 9, iss. 2
par: Timchenko N. A. Nikolay Alekseevich
Publié: (2015)

Effect of Annealing on the Defect Structure, Desorption Properties, and Structural-Phase State in Nanoscale Multilayer Zr/Nb Structures after Hydrogenation; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 17
Publié: (2025)

Effect of the structure and the phase composition on the mechanical properties of Al–Cu–Li alloy laser welds; Materials Science and Engineering: A; Vol. 809
Publié: (2021)

Формирование наноразмерных силицидов меди в высокоскоростной струе электроразрядной плазмы; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 335, № 7
Publié: (2024)

Phase Transformations of Nanostructured Zr-Y-O Coatings under Loading; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publié: (2017)

Application of polycapillary optics for dual energy spectroscopy based on a laboratory source; Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms; Vol. 402
Publié: (2017)

Глауконит из верхнемеловых пород Варваринского месторождения (Торгайский прогиб, Северный Казахстан); Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 329, № 2
Publié: (2018)

Orientation of Nickel-Based Alloy after Thermal Treatment; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publié: (2017)

Influence of Ti, Zr or Nb carbide adhesion layers on the adhesion, corrosion resistance and cell proliferation of titania doped hydroxyapatite to the Ti6Al4V alloy substrate, utilizable for orthopaedic implants; Ceramics International; Vol. 45, iss. 2, pt. A
Publié: (2019)

Синтез Магнели-фаз в высокоскоростной струе электроразрядной плазмы; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 335, № 11
Publié: (2024)

Numerical optimization of transmission bremsstrahlung target for intense pulsed electron beam; Nuclear Engineering and Technology; Vol. 54, iss. 2
Publié: (2022)

In vitro evaluation of Ag doped hydroxyapatite coatings in acellular media; Ceramics International; Vol. 45, iss. 8
Publié: (2019)

Structural properties of carbon composites doped with boron; Вестник Карагандинского университета. Серия Физика; № 3 (99)
Publié: (2020)

Experimental search of parametric X-ray radiation in a silicon crystal at a small angle near the velocity direction of relativistic electrons; Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms; Vol. 173, iss. 1-2 : Radiation from Relativistic Electrons in Periodic Structures
Publié: (2001)