Adhesion Transfer Layer Formation in Sliding on Equal-Channel Angle Pressed Ultrafine Grained AA6063; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
| Parent link: | AIP Conference Proceedings Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17).— 2017.— [020050, 4 p.] |
|---|---|
| Autor corporatiu: | , , |
| Altres autors: | , , , , , |
| Sumari: | Title screen The effect of equal-channel angle pressing (ECAP) conditions on wear resistance and adhesion of the resulted ultrafine grained AA6063 in sliding against a steel ball has been investigated. Using the 3D laser confocal microscopy the parameters of wear and adhesion transfer layer thickness on ultrafine grained AA6063 has been measured. As it was established, the ECAP at room temperature allowed forming AA6063 microstructure in sliding, which is more wear resistant and less prone to adhesion as compared to the previous one at higher temperatures. The effect of ECAP pass number n on the above parameters becomes negligible for n>8. The wear resistance of AA6063 processed by ECAP at 200°С is improved only for n=4 whereas n>4 has only a negative effect. Режим доступа: по договору с организацией-держателем ресурса |
| Idioma: | anglès |
| Publicat: |
2017
|
| Matèries: | |
| Accés en línia: | https://doi.org/10.1063/1.5013731 |
| Format: | Electrònic Capítol de llibre |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=657104 |
MARC
| LEADER | 00000nla2a2200000 4500 | ||
|---|---|---|---|
| 001 | 657104 | ||
| 005 | 20240112092444.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\23593 | ||
| 035 | |a RU\TPU\network\23576 | ||
| 090 | |a 657104 | ||
| 100 | |a 20180109a2017 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 105 | |a y z 100zy | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Adhesion Transfer Layer Formation in Sliding on Equal-Channel Angle Pressed Ultrafine Grained AA6063 |f A. V. Filippov [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 19 tit.] | ||
| 330 | |a The effect of equal-channel angle pressing (ECAP) conditions on wear resistance and adhesion of the resulted ultrafine grained AA6063 in sliding against a steel ball has been investigated. Using the 3D laser confocal microscopy the parameters of wear and adhesion transfer layer thickness on ultrafine grained AA6063 has been measured. As it was established, the ECAP at room temperature allowed forming AA6063 microstructure in sliding, which is more wear resistant and less prone to adhesion as compared to the previous one at higher temperatures. The effect of ECAP pass number n on the above parameters becomes negligible for n>8. The wear resistance of AA6063 processed by ECAP at 200°С is improved only for n=4 whereas n>4 has only a negative effect. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\4816 |t AIP Conference Proceedings | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\23152 |t Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17) |o Proceedings of the International conference, 9–13 October 2017, Tomsk, Russia |f National Research Tomsk Polytechnic University (TPU); eds. V. E. Panin, S. G. Psakhie, V. M. Fomin |v [020050, 4 p.] |d 2017 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a слои | |
| 610 | 1 | |a угловое прессование | |
| 610 | 1 | |a износ | |
| 610 | 1 | |a адгезия | |
| 610 | 1 | |a лазерная микроскопия | |
| 610 | 1 | |a алюминиевые сплавы | |
| 610 | 1 | |a микроструктуры | |
| 610 | 1 | |a износостойкость | |
| 610 | 1 | |a confocal laser | |
| 610 | 1 | |a scanning | |
| 610 | 1 | |a microscopy | |
| 701 | 1 | |a Filippov |b A. V. |c specialist in the field of mechanical engineering |c assistant of Yurga technological Institute of Tomsk Polytechnic University |f 1988- |g Andrey Vladimirovich |3 (RuTPU)RU\TPU\pers\34612 |9 17974 | |
| 701 | 1 | |a Tarasov |b S. Yu. |c specialist in the field of mechanical engineering |c Professor of Tomsk Polytechnic University, Doctor of technical sciences |f 1959- |g Sergei Yulievich |3 (RuTPU)RU\TPU\pers\31400 |9 15572 | |
| 701 | 1 | |a Podgornykh |b O. A. |c specialist in the field of mechanical engineering |c head of laboratory of Tomsk Polytechnic University |f 1986- |g Oleg Anatolievich |3 (RuTPU)RU\TPU\pers\37380 | |
| 701 | 1 | |a Chazov |b P. A. |c specialist in the field of mechanical engineering |c educational master of Yurga technological Institute of Tomsk Polytechnic University |f 1990- |g Pavel Andreevich |3 (RuTPU)RU\TPU\pers\34689 |9 18039 | |
| 701 | 1 | |a Shamarin |b N. N. |c specialist in the field of mechanical engineering |c educational master of Yurga technological Institute of Tomsk Polytechnic University |f 1989- |g Nikolay Nikolaevich |3 (RuTPU)RU\TPU\pers\37381 |9 20299 | |
| 701 | 1 | |a Filippova |b E. O. |c physicist |c Professor of Tomsk Polytechnic University, Doctor of Technical Sciences |f 1988- |g Ekaterina Olegovna |y Tomsk |3 (RuTPU)RU\TPU\pers\37038 |9 20053 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Юргинский технологический институт (филиал) (ЮТИ) |b Кафедра технологии машиностроения (ТМС) |3 (RuTPU)RU\TPU\col\18902 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Институт физики высоких технологий (ИФВТ) |b Кафедра физики высоких технологий в машиностроении (ФВТМ) |3 (RuTPU)RU\TPU\col\18687 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет (ТПУ) |b Физико-технический институт (ФТИ) |b Кафедра экспериментальной физики (ЭФ) |3 (RuTPU)RU\TPU\col\21255 |
| 801 | 2 | |a RU |b 63413507 |c 20180111 |g RCR | |
| 856 | 4 | |u https://doi.org/10.1063/1.5013731 | |
| 942 | |c CF | ||