The Influence of Surface Friction on the AA2024 Microstructure
| Parent link: | AIP Conference Proceedings Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17).— 2017.— [020040, 4 p.] |
|---|---|
| Autor principal: | Eliseev A. A. |
| Autor corporatiu: | Национальный исследовательский Томский политехнический университет (ТПУ) Институт физики высоких технологий (ИФВТ) Кафедра физики высоких технологий в машиностроении (ФВТМ) |
| Altres autors: | Kolubaev Е. А. Evgeny Aleksandrovich, Fortuna S. V. |
| Sumari: | Title screen This work is devoted to the study of the effect of sliding at velocities close to those achieved during friction stir welding or friction drilling on the microstructural evolution of 2024 aluminum alloy. The distribution of both solid solution grains and intermetallic precipitates is analyzed. No layers of recrystallized grains depleted by precipitates, which is a common finding in FSW or friction drilling, are found below the worn surface independently of the sliding velocity. A small precipitate content and size changes alone are observed. Режим доступа: по договору с организацией-держателем ресурса |
| Idioma: | anglès |
| Publicat: |
2017
|
| Matèries: | |
| Accés en línia: | https://doi.org/10.1063/1.5013721 |
| Format: | Electrònic Capítol de llibre |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=657095 |
Ítems similars
Microstructure Evolution in Dissimilar AA6060/Copper Friction Stir Welded Joints; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
per: Kalashnikova T. V. Tatiana Vladimirovna
Publicat: (2017)
per: Kalashnikova T. V. Tatiana Vladimirovna
Publicat: (2017)
Structure Formation of 5083 Alloy during Friction Stir Welding; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publicat: (2017)
Publicat: (2017)
AA2024 Microstructural Evolution after Bidirectional Friction Stir Processing; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publicat: (2017)
Publicat: (2017)
Структура сварных соединений алюминиевого сплава 1570С, полученных методом сварки трением с перемешиванием; Современные проблемы науки и образования; № 6
Publicat: (2014)
Publicat: (2014)
Microstructure of AA 2024 Fixed Joints Formed by Friction Stir Welding; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Publicat: (2015)
Publicat: (2015)
Molecular Dynamics Modeling of Bonding Two Materials by Atomic Scale Friction Stir Welding at Different Process Parameters; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
per: Konovalenko I. S. Ivan Sergeevich
Publicat: (2017)
per: Konovalenko I. S. Ivan Sergeevich
Publicat: (2017)
Structural and Phase State Evolution in Friction Drilling on AA2024; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
per: Fortuna S. Sergey
Publicat: (2017)
per: Fortuna S. Sergey
Publicat: (2017)
Ultrasonic-assisted aging in friction stir welding on Al-Cu-Li-Mg aluminum alloy; Welding in the World; Vol. 61, iss. 4
Publicat: (2017)
Publicat: (2017)
Сканер для ультразвуковой и вихретоковой диагностики сварных соединений, полученных сваркой трением с перемешиванием; Современные проблемы науки и образования; № 6
per: Иванов А. Н. Алексей Николаевич
Publicat: (2014)
per: Иванов А. Н. Алексей Николаевич
Publicat: (2014)
Microstructure of AA2024T3 fixed joints formed by friction stir welding; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
Publicat: (2015)
Publicat: (2015)
Исследование особенностей микроструктуры алюминий магниевого сплава, полученной при сварке трением с перемешиванием; Известия вузов. Физика; Т. 57, № 10
per: Колубаев Е. А. Евгений Александрович
Publicat: (2014)
per: Колубаев Е. А. Евгений Александрович
Publicat: (2014)
Structure and Properties of Parts Produced by Electron-Beam Additive Manufacturing; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publicat: (2017)
Publicat: (2017)
Infrared Thermography Inspection of Severe Friction on UFG Stainless Steel, Copper and Aluminum Alloy; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
per: Filippov A. V.
Publicat: (2019)
per: Filippov A. V.
Publicat: (2019)
Effect of Ultrasonic Application during Friction Stir Welding on Microstructure and Properties of AA2024 Fixed Joints; Key Engineering Materials; Vol. 683 : Multifunctional Materials: Development and Application
Publicat: (2016)
Publicat: (2016)
Structural Evolution of Multiple Friction Stir Processed AA2024; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publicat: (2017)
Publicat: (2017)
Molecular Dynamics Modeling of Bonding Two Materials by Atomic Scale Friction Stir Welding; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
per: Konovalenko I. S. Ivan Sergeevich
Publicat: (2017)
per: Konovalenko I. S. Ivan Sergeevich
Publicat: (2017)
Fronts of Strain-Induced Phase Transformation and Their Kinetics; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publicat: (2017)
Publicat: (2017)
Влияние поверхностного трения на структуру алюминиевого сплава Д16; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
per: Елисеев А. А.
Publicat: (2017)
per: Елисеев А. А.
Publicat: (2017)
Active control of friction by transverse oscillations; Friction; Vol. 7, iss. 1
Publicat: (2019)
Publicat: (2019)
Формирование микроструктуры алюминиево-магниевого сплава при сварке трением с перемешиванием; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
Publicat: (2017)
Publicat: (2017)
Thermography inspection of friction stir welding; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
Publicat: (2014)
Publicat: (2014)
Acoustic Emission Analysis of Fatigue Damages of Titanium Alloys; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publicat: (2017)
Publicat: (2017)
Процессы разрушения при растяжении сварных соединений из алюминий-литиевого сплава AA8090, выполненных сваркой трением с перемешиванием; Современные материалы и технологии новых поколений
per: Еремин А. В. Александр Вячеславович
Publicat: (2019)
per: Еремин А. В. Александр Вячеславович
Publicat: (2019)
About Structural Phase State of Coating Based on Zirconium Oxide Formed by Microplasma Oxidation Method; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publicat: (2017)
Publicat: (2017)
Orientation and Faulted Structure of [gamma]-Phases in Lanthanum-Alloyed Ni-Al-Cr Superalloy; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publicat: (2017)
Publicat: (2017)
Соединение автомобильных листовых материалов сваркой методом трения; Прогрессивные технологии и экономика в машиностроении
per: Рашитов В. Р.
Publicat: (2021)
per: Рашитов В. Р.
Publicat: (2021)
Технологические особенности сварки трения с перемешиванием; Прогрессивные технологии и экономика в машиностроении
per: Березовский А. Н.
Publicat: (2014)
per: Березовский А. Н.
Publicat: (2014)
Результаты экспериментальных исследований процесса дефектообразования в процессе формирования соединений сваркой трением с перемешиванием с применением метода акустической эмиссии; Инновации в неразрушающем контроле (SibTest 2017)
per: Степанова К. А. Ксения Андреевна
Publicat: (2017)
per: Степанова К. А. Ксения Андреевна
Publicat: (2017)
Dynamic Behavior of Friction Ultrafine-Grained AA5052; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Publicat: (2018)
Publicat: (2018)
Effect of Hydrogen on the Deformation Development in Titanium Alloy of the Ti-Al-V System under Creep; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publicat: (2017)
Publicat: (2017)
Microstructure of Fixed Butt Joints Formed by Friction Stir Welding on 2024T3 Aluminum Alloy; Key Engineering Materials; Vol. 683 : Multifunctional Materials: Development and Application
Publicat: (2016)
Publicat: (2016)
Effect of ultrasound on interface morphology and strength of titanium and aluminum alloys joints produced by friction stir welding; Physical Mesomechanics; Vol. 26, iss. 1
Publicat: (2023)
Publicat: (2023)
Radiographic detection of defects in friction stir welding on aluminum alloy AMg5M; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
per: Tarasov S. Yu. Sergei Yulievich
Publicat: (2014)
per: Tarasov S. Yu. Sergei Yulievich
Publicat: (2014)
Применение метода акустической эмиссии в качестве онлайн-мониторнига процесса формирования СТП-соединений; Современные технологии и материалы новых поколений
per: Левихина А. В.
Publicat: (2017)
per: Левихина А. В.
Publicat: (2017)
Features of the microstructure development under conditions, reproducing the process of friction stir welding. Molecular-dynamics study; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
Publicat: (2014)
Publicat: (2014)
Tensile Strength on Friction Stir Processed AMg5 (5083) Aluminum Alloy; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Publicat: (2016)
Publicat: (2016)
Structure and Phase Transformations in 0.34C-1Cr-1Ni-1Mo-Fe Steel after Electrolytic-Plasma Treatment; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publicat: (2017)
Publicat: (2017)
Методика ультразвукового контроля сварных соединений, полученных сваркой трением с перемешиванием, с использованием технологии фазированной антенной решетки; Современные проблемы науки и образования; № 6
per: Рубцов В. Е. Валерий Евгеньевич
Publicat: (2014)
per: Рубцов В. Е. Валерий Евгеньевич
Publicat: (2014)
The Formation of One-Piece Bimetallic Joint Made of X6CrNiTi18-10 Steel and 36CrNiTiAl Alloy; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
per: Svyazhina N. V.
Publicat: (2016)
per: Svyazhina N. V.
Publicat: (2016)
Влияние ультразвукового воздействия на морфологию границы раздела и прочность биметаллического соединения титанового и алюминиевого сплавов, полученного при помощи сварки трением с перемешиванием; Физическая мезомеханика; Т. 25, № 5
Publicat: (2022)
Publicat: (2022)
Ítems similars
-
Microstructure Evolution in Dissimilar AA6060/Copper Friction Stir Welded Joints; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
per: Kalashnikova T. V. Tatiana Vladimirovna
Publicat: (2017) -
Structure Formation of 5083 Alloy during Friction Stir Welding; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publicat: (2017) -
AA2024 Microstructural Evolution after Bidirectional Friction Stir Processing; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publicat: (2017) -
Структура сварных соединений алюминиевого сплава 1570С, полученных методом сварки трением с перемешиванием; Современные проблемы науки и образования; № 6
Publicat: (2014) -
Microstructure of AA 2024 Fixed Joints Formed by Friction Stir Welding; AIP Conference Proceedings; Vol. 1683 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures
Publicat: (2015)