Processing of Industrial Metallurgical Wastes as the Basis of Manufacturing Technology Welding Fluxes and Additives NIM1; Key Engineering Materials; Vol. 736 : Materials and their Application
| Parent link: | Key Engineering Materials: Scientific Journal Vol. 736 : Materials and their Application.— 2017.— [P. 191-196] |
|---|---|
| Coauteur: | |
| Andere auteurs: | , , , , |
| Samenvatting: | Title screen Presented are the results of the use of metallurgical wastes as constituents of welding fluxes. On the basis of fine particle gas purification in aluminum production, a carbon fluoride additive (FD-UFS) has been designed for welding fluxes which allows for manufacturing of steel constructions of northern execution with improved mechanical properties of welded joints. It is shown that the introduction of FD-UFS to fluxes AN-348, AN-60 and AN-67 increases the range of the required mechanical properties. Composition and manufacturing technology has been developed for a new welding flux with application of slag from silicomanganese production. Fractional composition of the flux has been selected. A comparative assessment of the mechanical properties of the developed flux with widely used flux AN-348 (GOST 9087-81) showed that the mechanical properties of the new flux are much greater. It has been determined that the introduction of flux additive FD-UFS in the amount of 2-8 % significantly increases the value of toughness KCV at a temperature of minus 20 °C. Режим доступа: по договору с организацией-держателем ресурса |
| Taal: | Engels |
| Gepubliceerd in: |
2017
|
| Onderwerpen: | |
| Online toegang: | http://dx.doi.org/10.4028/www.scientific.net/KEM.736.191 |
| Formaat: | Elektronisch Hoofdstuk |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=656922 |
Gelijkaardige items
Quality of Metal Deposited Flux Cored Wire with the System Fe-C-Si-Mn-Cr-Mo-Ni-V-Co; Key Engineering Materials; Vol. 736 : Materials and their Application
Gepubliceerd in: (2017)
Gepubliceerd in: (2017)
Technological Improvement of Surfacing of Parts of Hammer Crushers Used in Coke-Chemical Industry; Materials Science Forum; Vol. 927 : Materials and Processing Technology II
Gepubliceerd in: (2018)
Gepubliceerd in: (2018)
Ash and Slag Waste Processing in Self-Shielded Atmospheric DC Arc Discharge Plasma; Materials; Vol. 15 iss. 22
Gepubliceerd in: (2022)
Gepubliceerd in: (2022)
Modern Methods of Rail Welding; Key Engineering Materials; Vol. 736 : Materials and their Application
Gepubliceerd in: (2017)
Gepubliceerd in: (2017)
Comparative Analysis of Weld Microstructure in Ti-6Al-4V Samples Produced by Rolling and Wire-Feed Electron Beam Additive Manufacturing; Physical Mesomechanics; Vol. 26, iss. 6
Gepubliceerd in: (2023)
Gepubliceerd in: (2023)
High-quality low-phosphorous manganese alloys for production of steel of low-temperature reliability; Key Engineering Materials; Vol. 839 : Materials Science, Mechanical Engineering and Energy: Problems and Prospects for Development, MSMEE 2019
Gepubliceerd in: (2020)
Gepubliceerd in: (2020)
New Carbon-Fluorine Containing Additive for the Welding Fluxes; Applied Mechanics and Materials; Vol. 682 : Innovation Technology and Economics in Engineering
door: Kozyrev N. A.
Gepubliceerd in: (2014)
door: Kozyrev N. A.
Gepubliceerd in: (2014)
Особенности технологии выплавки стали марки 30ХГСА; Прогрессивные технологии и экономика в машиностроении
door: Кохидзе В. Р.
Gepubliceerd in: (2021)
door: Кохидзе В. Р.
Gepubliceerd in: (2021)
Влияние содержания марганца в оксогидрооксиде алюминия - прекурсоре MnOx-Al2O3 катализаторов - на каталитическую активность в реакции окисления С1-С3 углеводородов; Известия Томского политехнического университета [Известия ТПУ]; Т. 325, № 3 : Химия и химические технологии
Gepubliceerd in: (2014)
Gepubliceerd in: (2014)
Screening of polymeric membranes for membrane assisted deacidification of sardine oil; Resource-Efficient Technologies; Vol. 2, Suppl. 1
Gepubliceerd in: (2016)
Gepubliceerd in: (2016)
Low-temperature method for desiliconization of polymetallic slags by ammonium bifluoride solution; Environmental Science and Pollution Research (ESPR); Vol. 30, iss. 11
Gepubliceerd in: (2023)
Gepubliceerd in: (2023)
Phase and elemental composition of silicon-containing hydroxyapatite-based coatings fabricated by RF-magnetron sputtering for medical implants; Inorganic Materials: Applied Research; Vol. 4, iss. 3
Gepubliceerd in: (2013)
Gepubliceerd in: (2013)
Production of Welding Fluxes Using Waste Slag Formed in Silicomanganese Smelting; IOP Conference Series: Materials Science and Engineering; Vol. 125 : Materials Treatment: Current Problems and Solutions
Gepubliceerd in: (2016)
Gepubliceerd in: (2016)
Conceptual Design of Experimental Facility for Large-Diameter NTD-Si at the IRT-T Reactor; Atom Indonesia; Vol. 47, iss. 1
Gepubliceerd in: (2021)
Gepubliceerd in: (2021)
Electron Beam Welding of Dissimilar Materials; Key Engineering Materials; Vol. 743 : High Technology: Research and Applications (HTRA 2016)
door: Frolov V. A.
Gepubliceerd in: (2017)
door: Frolov V. A.
Gepubliceerd in: (2017)
Effects of annealing in vacuum on the microstructure of silicon-containing calcium phosphate films deposited on a ZrNb alloy by radio-frequency magnetron sputtering; Vacuum; Vol. 212
Gepubliceerd in: (2023)
Gepubliceerd in: (2023)
Analysis of the Effect of Fluxing Additives in the Production of Titanium Slags in Laboratory Conditions; Metals; Vol. 14, iss. 12
Gepubliceerd in: (2024)
Gepubliceerd in: (2024)
Robocasting of reaction bonded silicon carbide structures; Journal of the European Ceramic Society; Vol. 39, iss. 15
Gepubliceerd in: (2019)
Gepubliceerd in: (2019)
Nuclear Doping of Single-Crystal Silicon in the IRT-T Pool Type Research Nuclear Reactor; Actual Problems of Electronic Instrument Engineering (APEIE-2018); Vol. 1, pt. 1
Gepubliceerd in: (2018)
Gepubliceerd in: (2018)
Influence of Nanostructured Powder Modifiers on the Structure of a Welding Bead; Advanced Materials Research; Vol. 872
Gepubliceerd in: (2014)
Gepubliceerd in: (2014)
Optimization of Welding Parameters for Small-Scale Resistance Spot Welding of Zirconium Alloys; Materials Science Forum; Vol. 970 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance II
door: Slobodyan M. S. Mikhail Stepanovich
Gepubliceerd in: (2019)
door: Slobodyan M. S. Mikhail Stepanovich
Gepubliceerd in: (2019)
The Research of Sulfuric Acidic Recycling of Aluminum Industry Fluorine-containing Waste Products; Procedia Chemistry; Vol. 11 : 1st International Symposium on Inorganic Fluorides: Chemistry and Technology, ISIF 2014, Tomsk, Russia
door: Dyachenko A. N. Alexander Nikolaevich
Gepubliceerd in: (2014)
door: Dyachenko A. N. Alexander Nikolaevich
Gepubliceerd in: (2014)
Improvement of Research Procedures into the Highly Rigid Welded Metal Using Thermal Microscopy Facilities; Materials Science Forum; Vol. 927 : Materials and Processing Technology II
Gepubliceerd in: (2018)
Gepubliceerd in: (2018)
Ab initio calculations and a scratch test study of RF-magnetron sputter deposited hydroxyapatite and silicon-containing hydroxyapatite coatings; Surfaces and Interfaces; Vol. 21
Gepubliceerd in: (2020)
Gepubliceerd in: (2020)
Analysis of Quality of Welded Joints of Iron-Concrete Products; Materials Science Forum; Vol. 942 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance
Gepubliceerd in: (2019)
Gepubliceerd in: (2019)
Effect of Dual Surface Cooling on the Temperature Distribution of a Nuclear Fuel Pellet; Key Engineering Materials; Vol. 769 : High Technology: Research and Applications (HTRA 2017)
door: Odii Christopher Joseph
Gepubliceerd in: (2018)
door: Odii Christopher Joseph
Gepubliceerd in: (2018)
Preparation of a silicate-containing hydroxyapatite-based coating by magnetron sputtering: structure and osteoblast-like MG63 cells in vitro study: Structure and osteoblast-like MG63 cells in vitro study; RSC Advances; № 28
Gepubliceerd in: (2013)
Gepubliceerd in: (2013)
Effect of Various Heat Sources on Heating of Contact Tip during Mig/Mag Welding; Materials Science Forum; Vol. 927 : Materials and Processing Technology II
Gepubliceerd in: (2018)
Gepubliceerd in: (2018)
The research of uranium monoxide-oxide dissolution process in nitric acid; Bulletin of the Tomsk Polytechnic University; Vol. 311, № 3
Gepubliceerd in: (2007)
Gepubliceerd in: (2007)
Neutrophil Immunomodulatory Activity of Nerolidol, a Major Component of Essential Oils from Populus balsamifera Buds and Propolis; Plants; Vol. 11, iss. 23
Gepubliceerd in: (2022)
Gepubliceerd in: (2022)
The Current State of Application of Ultra- and Nanostructured Powders in Technologies in Welding Technologies (Review); Materials Science Forum; Vol. 927 : Materials and Processing Technology II
door: Kuznetsov M. A. Maksim Aleksandrovich
Gepubliceerd in: (2018)
door: Kuznetsov M. A. Maksim Aleksandrovich
Gepubliceerd in: (2018)
Studying the utilization techniques of ammonium hexafluorosilicate; Bulletin of the Tomsk Polytechnic University; Vol. 311, № 3
Gepubliceerd in: (2007)
Gepubliceerd in: (2007)
Structure and Phase Composition of Welded Joints Modified by Different Welding Techniques; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Gepubliceerd in: (2017)
Gepubliceerd in: (2017)
Energy Parameters of Weld Formation Process in MIG-MAG Welding; Materials Science Forum; Vol. 927 : Materials and Processing Technology II
Gepubliceerd in: (2018)
Gepubliceerd in: (2018)
Neutrophil Immunomodulatory Activity of Farnesene, a Component of Artemisia dracunculus Essential Oils; Pharmaceuticals; Vol. 15, iss. 5
Gepubliceerd in: (2022)
Gepubliceerd in: (2022)
Ash and Slag Waste as a Secondary Raw Material; Procedia Chemistry; Vol. 10 : Chemistry and Chemical Engineering in XXI century
Gepubliceerd in: (2014)
Gepubliceerd in: (2014)
Numerical Simulation of Thermal Processes in Welding with Pulsed Electrode Wire Feeding; Materials Science Forum; Vol. 927 : Materials and Processing Technology II
Gepubliceerd in: (2018)
Gepubliceerd in: (2018)
Additive Manufacturing of Metal Products via Filler Wire Arc Welding (Review); Materials Science Forum; Vol. 1064
Gepubliceerd in: (2022)
Gepubliceerd in: (2022)
The Effect of Energy Parameters of Power Sources on the Structure and Properties of Permanent Joints at Manual Arc Welding; Metals; Vol. 14, iss. 7
door: Ilyashchenko D. P. Dmitry Pavlovich
Gepubliceerd in: (2024)
door: Ilyashchenko D. P. Dmitry Pavlovich
Gepubliceerd in: (2024)
Valence state conversion of Mn ions in Li2O–ZnO-GeO2 glass-ceramics: Spectral, structural, ESR and XRF studies; Ceramics International; Vol. 50, iss. 11, Pt. B
Gepubliceerd in: (2024)
Gepubliceerd in: (2024)